Merge pull request #242 from sk2/ACLs. [Simon Knight]
Ac ls
Add tox. [Simon Knight]
Merge pull request #241 from sk2/ACLs. [Simon Knight]
Ac ls
- >= rather than == for deps. [Simon Knight]
- Update info on ip blocks. [Simon Knight]
- User: record overlay dependencies to new overlay. [Simon Knight]
Minor tweaks. [Simon Knight]
Condense example. [Simon Knight]
Tidy. [Simon Knight]
Tidy. [Simon Knight]
Update docs for json example. [Simon Knight]
Add Json to doc for gh-222. [Simon Knight]
User: Initial commit of JSON load code for gh-222. [Simon Knight]
Example in tests/house.json if using dev build of ank:
` $ autonetkit -f tests/house.json INFO VIRL Configuration Engine 0.9.0 INFO AutoNetkit 0.9.0 INFO IPv4 allocations: Infrastructure: 10.0.0.0/8, Loopback: 192.168.0.0/22 INFO Allocating v4 Infrastructure IPs INFO Allocating v4 Primary Host loopback IPs INFO Topology not created for VIRL, skipping Cisco PCE design rules INFO Skipping iBGP for iBGP disabled nodes: [] INFO All validation tests passed. INFO Rendering Configuration Files INFO Finished `if run in monitor mode, then changes will be reflected live:` $ ank_webserver `and then` $ autonetkit -f tests/house.json —monitor `Updates. [Simon Knight]
Rebuild doc. [Simon Knight]
Increment year. [Simon Knight]
Run sphinx-apidoc. [Simon Knight]
Adding doctests. [Simon Knight]
User: update_http -> update_vis. [Simon Knight]
User: Initial support for multi-homed servers for VIRL-425. [Simon Knight]
Add initial support to auto-build dependency diagrams. [Simon Knight]
Merge pull request #237 from oliviertilmans/patch-1. [Simon Knight]
The network might not run BGP
The network might not run BGP. [oliviertilmans]
This result in a Key Error
Merge pull request #236 from sk2/parallel. [Simon Knight]
Parallel
Merge pull request #235 from sk2/ACLs. [Simon Knight]
Ac ls
Revert "chg: dev: add ACL placeholder for gh-234" [Simon Knight]
This reverts commit 4941b893daf279e5bb24a0b54c10ed490db27716.
Merge pull request #232 from sk2/render2.0. [Simon Knight]
Render2.0
Add: dev: initial work to support vlans for gh-229. [Simon Knight]
Update README.md. [Simon Knight]
Merge pull request #228 from sk2/parallel. [Simon Knight]
chg: doc: minor tweaks
Merge pull request #227 from sk2/parallel. [Simon Knight]
Parallel
Update README.md. [Simon Knight]
Update README.md. [Simon Knight]
Merge pull request #226 from sk2/parallel. [Simon Knight]
Chg: doc: add Json to doc for gh-222
Merge pull request #225 from sk2/parallel. [Simon Knight]
Chg: User: Initial commit of JSON load code for gh-222
Merge pull request #224 from sk2/parallel. [Simon Knight]
Parallel
Merge pull request #223 from sk2/parallel. [Simon Knight]
Parallel
Merge pull request #221 from sk2/parallel. [Simon Knight]
Parallel
- User: Support layer2 and layer3 overlays for gh-206. [Simon Knight]
- User: Sort nodes before allocation, closes gh-208. [Simon Knight]
- User: label-based sort if present closes gh-207. [Simon Knight]
- User: add ability to search for interfaces by their "id" string e.g. "GigabitEthernet0/1" [Simon Knight]
- User: Allow custom config injection for VIRL-122. [Simon Knight]
- User: Handle IP addresses on L3 devices for VIRL-372. [Simon Knight]
- User: support custom unsupported server templates for VIRL-378. [Simon Knight]
- User: add "external_connector" device_type for VIRL-672. [Simon Knight]
- User: only validate IP on Layer 3 devices for VIRL-672. [Simon Knight]
- Allow specifying edge properties (color/width) [Simon Knight]
User: Corrects bug with non-routers in EIGRP fixes VIRL-659. [Simon Knight]
Had extra ISIS NET address line
- Update warnings to not warn if no subnet/prefix set. [Simon Knight]
User: Use ASN as process-id for IGP for VIRL-602. [Simon Knight]
Causes problems if multiple ASes connected across a multi-point network.
- Add overview video. [Simon Knight]
- User: Allow manually specified IPv6 blocks for VIRL-481. [Simon Knight]
- User: Config driven IP defaults, better logging of problems with manually specified IPs. [Simon Knight]
- User: Swap default IPv6 blocks for infra/loopback to be sequential. [Simon Knight]
- User: Tidied up VRF role notification logic to aggregate by role. VIRL-368. [Simon Knight]
- User: Exclude BGP block if no iBGP/eBGP sessions. VIRL-564. [Simon Knight]
- User: Warn that IPv6 MPLS VPNs not currently supported for VIRL-56. [Simon Knight]
- User: update iBGP design rules for VIRL-558. [Simon Knight]
- User: Allow PE RRC nodes to participate in ibgp_vpn_v4. [Simon Knight]
- User: Add ibgp "peer" type for VIRL-558. [Simon Knight]
- User: Clarify IPv4 allocation warning message for VIRL-550. [Simon Knight]
- User: list Interfaces as GigabitEthernet0/1.RR_2 instead of (GigabitEthernet0/1, RR_2) [Simon Knight]
- User: Allow user-defined IPv6 IPs (infra + loopback) [Simon Knight]
- User: More descriptive logs for user-defined IPv6 addresses. [Simon Knight]
- User: Bugfix for EIGRP IPv6 for VIRL-493. [Simon Knight]
- User: Warn if partial IPs set for VIRL-456. [Simon Knight]
- User: Display human-readable ibgp_role for VIRL-469. [Simon Knight]
- User: Update logging. [Simon Knight]
- User: Tidy logging. [Simon Knight]
- User: Warn for unsupported device features. [Simon Knight]
- User: Use VIRL platform identifier instead of Cisco. [Simon Knight]
- User: Tidy logging messages. [Simon Knight]
Sort values neigh_most_frequent so tie-break chooses lowest. [Simon Knight]
Addresses issue with stability in IP addressing: inter-asn links had a collision domain that was arbitrarily being allocated to one or the other ASN depending on the arbitarty position. This ensures the lowest is always returned in a tie-break leading to repeatable addressing (especially important for automated tests)
Merge branch 'master' of github.com:sk2/autonetkit. [Simon Knight]
Conflicts: .bumpversion.cfg autonetkit/render.py setup.py
Merge cleanup. [Simon Knight]
- @chg: dev: renaming. [Simon Knight]
- @chg: dev: renaming. [Simon Knight]
- User: Display address blocks to use for VIRL-350. [Simon Knight]
- User: Display address blocks to use for VIRL-350. [Simon Knight]
- User: add per-element logging for GH-190. [Simon Knight]
- User: add per-element logging for GH-190. [Simon Knight]
- User: add single config for gh-189. [Simon Knight]
- User: add single config for gh-189. [Simon Knight]
- User: Screenshot capture for GH-188. [Simon Knight]
- User: Screenshot capture for GH-188. [Simon Knight]
- Change: dev: remove superseded config. [Simon Knight]
- Change: dev: remove superseded config. [Simon Knight]
- Change: dev: refactor XR OSPF by interfaces to common router_base. [Simon Knight]
- Change: dev: refactor XR OSPF by interfaces to common router_base. [Simon Knight]
- Update changelog. [Simon Knight]
- Update changelog. [Simon Knight]
- Add gitchangelog support. [sk2]
- Add gitchangelog support. [sk2]
- Move indent correctly inside loop. [sk2]
- Move indent correctly inside loop. [sk2]
- Typo fix for ebgp not ibgp. [sk2]
- Typo fix for ebgp not ibgp. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Add read me. [sk2]
- Add read me. [sk2]
- Update. [sk2]
- Update. [sk2]
- Add img. [sk2]
- Add img. [sk2]
- Examples. [sk2]
- Examples. [sk2]
- Add cwd to templates search dir. [sk2]
- Add cwd to templates search dir. [sk2]
- Add ordering. [sk2]
- Add ordering. [sk2]
- Add note. [sk2]
- Add note. [sk2]
- Support v6 bgp. [sk2]
- Support v6 bgp. [sk2]
- Add note. [sk2]
- Add note. [sk2]
- Add __ne__ and ordering. [sk2]
- Add __ne__ and ordering. [sk2]
- Support nidb nodes. [sk2]
- Support nidb nodes. [sk2]
- Add example. [sk2]
- Add example. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Handle new overlays. [sk2]
- Handle new overlays. [sk2]
- New overlay. [sk2]
- New overlay. [sk2]
- Better json. [sk2]
- Better json. [sk2]
- Tutorial notebook. [sk2]
- Tutorial notebook. [sk2]
- Add new test case notes. [sk2]
- Add new test case notes. [sk2]
- Better debugging for templates. [sk2]
- Better debugging for templates. [sk2]
- More support for gh-186. [sk2]
- More support for gh-186. [sk2]
- Move mpls code to separate module. [sk2]
- Move mpls code to separate module. [sk2]
- More support for gh-186. [sk2]
- More support for gh-186. [sk2]
- Pep8. [sk2]
- Pep8. [sk2]
- Improvements to setting defaults on bunches. [sk2]
- Improvements to setting defaults on bunches. [sk2]
- Remove old demos. [sk2]
- Remove old demos. [sk2]
- Add config_stanza class for gh-186. [sk2]
- Add config_stanza class for gh-186. [sk2]
- Add option for stack_trace (useful for dev) [sk2]
- Add option for stack_trace (useful for dev) [sk2]
- Add browser test. [sk2]
- Add browser test. [sk2]
- Connectors. [sk2]
- Connectors. [sk2]
- Remove old call to publish data. [sk2]
- Remove old call to publish data. [sk2]
- Add note. [sk2]
- Add note. [sk2]
- Remove unused messaging functions. [sk2]
- Remove unused messaging functions. [sk2]
- Add log message. [sk2]
- Add log message. [sk2]
- Update anm tests. [sk2]
- Update anm tests. [sk2]
- Testing for anm. [sk2]
- Testing for anm. [sk2]
- Remove directed. [sk2]
- Remove directed. [sk2]
- Improving edge-case handling. [sk2]
- Improving edge-case handling. [sk2]
- Remove state for pickling - use json. [sk2]
- Remove state for pickling - use json. [sk2]
- Improving handling for custom overlays. [sk2]
- Improving handling for custom overlays. [sk2]
- Remove unused code. [sk2]
- Remove unused code. [sk2]
- Remove old ibgp code. [sk2]
- Remove old ibgp code. [sk2]
- More removal of edge_id for gh-184. [sk2]
- More removal of edge_id for gh-184. [sk2]
- Closes gh-184. [sk2]
- Closes gh-184. [sk2]
- Pylint. [sk2]
- Pylint. [sk2]
- Update warnings. [sk2]
- Update warnings. [sk2]
- Add other AS subnets. [sk2]
- Add other AS subnets. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Handle non-subnet collision domains (i.e. no nodes) [sk2]
- Handle non-subnet collision domains (i.e. no nodes) [sk2]
- Rename subtype. [sk2]
- Rename subtype. [sk2]
- Pass exception up. [sk2]
- Pass exception up. [sk2]
- Use official subtypes. [sk2]
- Use official subtypes. [sk2]
- Pep8. [sk2]
- Pep8. [sk2]
- Add logging. [sk2]
- Add logging. [sk2]
- Fix issue with uuids being re-used but discarded, update logging. [sk2]
- Fix issue with uuids being re-used but discarded, update logging. [sk2]
- Catching overlay uuid deletion errors. [sk2]
- Catching overlay uuid deletion errors. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Handling of interfaces in adding edges. [sk2]
- Handling of interfaces in adding edges. [sk2]
- Allow uuid to be specified in call. [sk2]
- Allow uuid to be specified in call. [sk2]
- Update connectors. [sk2]
- Update connectors. [sk2]
- Add comment. [sk2]
- Add comment. [sk2]
- Add script to build wheel. [sk2]
- Add script to build wheel. [sk2]
- Isort imports. [sk2]
- Isort imports. [sk2]
- Enable telnet and ssh over vty. [sk2]
- Enable telnet and ssh over vty. [sk2]
- Tidying. [sk2]
- Tidying. [sk2]
- Correct bug in writing static instead of host routes. [sk2]
- Correct bug in writing static instead of host routes. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy logging. [sk2]
- Tidy logging. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Add test. [sk2]
- Add test. [sk2]
- Add tests. [sk2]
- Add tests. [sk2]
- Add test. [sk2]
- Add test. [sk2]
- Add test. [sk2]
- Add test. [sk2]
- Add test. [sk2]
- Add test. [sk2]
- Add test topology. [sk2]
- Add test topology. [sk2]
- Add extra onepk line. [sk2]
- Add extra onepk line. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Return the node label rendered rather than node_id for repr of interfaces. [sk2]
- Return the node label rendered rather than node_id for repr of interfaces. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- If exception, send the visualisation that was constructed to help debug. [sk2]
- If exception, send the visualisation that was constructed to help debug. [sk2]
- Return nonzero if error. [sk2]
- Return nonzero if error. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Add top-level exception capturing. [sk2]
- Add top-level exception capturing. [sk2]
- Revert out. [sk2]
- Revert out. [sk2]
- Onepk syntax change. [sk2]
- Onepk syntax change. [sk2]
- Remove todo. [sk2]
- Remove todo. [sk2]
- More descriptive error message for mismatched subnets. [sk2]
- More descriptive error message for mismatched subnets. [sk2]
- Copy label across to ipv4 and v6 graphs for display. [sk2]
- Copy label across to ipv4 and v6 graphs for display. [sk2]
- Add yaml helpers for multiline strings. [sk2]
- Add yaml helpers for multiline strings. [sk2]
- Default handler. [sk2]
- Default handler. [sk2]
- Add validate catch. [sk2]
- Add validate catch. [sk2]
- Handle no routing. [sk2]
- Handle no routing. [sk2]
Closes gh-183. [sk2]
Closes gh-183. [sk2]
Use new vars, tidy. [sk2]
Use new vars, tidy. [sk2]
Info -> debug. [sk2]
Info -> debug. [sk2]
Lists instead of generators. [sk2]
Lists instead of generators. [sk2]
Ignores. [sk2]
Ignores. [sk2]
Merge pull request #182 from iainwp/master. [Simon Knight]
modification to accept a configuration file from an environment variable
Merge pull request #182 from iainwp/master. [Simon Knight]
modification to accept a configuration file from an environment variable
Comment out custom code. [sk2]
Comment out custom code. [sk2]
Revert labels. [sk2]
Revert labels. [sk2]
254 on static route. [sk2]
254 on static route. [sk2]
Modification to accept a configuration file from an environment variable. [iainwp]
Modification to accept a configuration file from an environment variable. [iainwp]
Merge pull request #125 from oliviertilmans/loopback_ids. [Simon Knight]
Loopback interface needs to have an associated id with them
Merge pull request #125 from oliviertilmans/loopback_ids. [Simon Knight]
Loopback interface needs to have an associated id with them
- Tidy overlay names. [sk2]
- Tidy overlay names. [sk2]
- Handle vis corner case if just input. [sk2]
- Handle vis corner case if just input. [sk2]
- Correct version that bumpversion clobbered. [sk2]
- Correct version that bumpversion clobbered. [sk2]
- Add helper function to return neighbors of an interface. [sk2]
- Add helper function to return neighbors of an interface. [sk2]
- Add is_bound property for nidb interfaces for parity with anm. [sk2]
- Add is_bound property for nidb interfaces for parity with anm. [sk2]
- Set mgmt interface name correctly. [sk2]
- Set mgmt interface name correctly. [sk2]
- Remove extra http postings. [sk2]
- Remove extra http postings. [sk2]
- Add helper function to return neighbors of an interface. [sk2]
- Add helper function to return neighbors of an interface. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidying version string. [sk2]
- Tidying version string. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Fix extra syntax. [sk2]
- Fix extra syntax. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- More work for cloud-init support. [sk2]
- More work for cloud-init support. [sk2]
- Ignore .yaml. [sk2]
- Ignore .yaml. [sk2]
- Improving render for cloud init output. [sk2]
- Improving render for cloud init output. [sk2]
- Cloud init. [sk2]
- Cloud init. [sk2]
- Move out vis. [sk2]
- Move out vis. [sk2]
- Top-level behaviour. [sk2]
- Top-level behaviour. [sk2]
- Change top level peering behaviour. [sk2]
- Change top level peering behaviour. [sk2]
- Lock deps. [sk2]
- Lock deps. [sk2]
- Tidying. [sk2]
- Tidying. [sk2]
- First iteration of simplified RR/HRR iBGP. [sk2]
- First iteration of simplified RR/HRR iBGP. [sk2]
- Refactor out ibgp. [sk2]
- Refactor out ibgp. [sk2]
- Remove extra node. [sk2]
- Remove extra node. [sk2]
- Path colours. [sk2]
- Path colours. [sk2]
- Handle base topo. [sk2]
- Handle base topo. [sk2]
- Update colours. [sk2]
- Update colours. [sk2]
- Error handling. [sk2]
- Error handling. [sk2]
- Logging. [sk2]
- Logging. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Basic ibgp check. [sk2]
- Basic ibgp check. [sk2]
- Fix looping issue not assigning server ips. [sk2]
- Fix looping issue not assigning server ips. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Write IPs onto all server interfaces. [sk2]
- Write IPs onto all server interfaces. [sk2]
- Redo bgp peering for ios. [sk2]
- Redo bgp peering for ios. [sk2]
- Revisiting bgp peering. [sk2]
- Revisiting bgp peering. [sk2]
- Adding nailed up routes for eBGP. [sk2]
- Adding nailed up routes for eBGP. [sk2]
- Use -host for /32. [sk2]
- Use -host for /32. [sk2]
- Tidying. [sk2]
- Tidying. [sk2]
- Add config-driven webserver port. [sk2]
- Add config-driven webserver port. [sk2]
- Fix server issue. [sk2]
- Fix server issue. [sk2]
- Toggle routing config. [sk2]
- Toggle routing config. [sk2]
- Add mpls oam. [sk2]
- Add mpls oam. [sk2]
- Call mpls oam module. [sk2]
- Call mpls oam module. [sk2]
- Add mpls oam. [sk2]
- Add mpls oam. [sk2]
- Don't auto-correct explicitly set ASNs. [sk2]
- Don't auto-correct explicitly set ASNs. [sk2]
- Fix typo in comment. [sk2]
- Fix typo in comment. [sk2]
- Exclude multipoint edges from mpls te and rsvp. [sk2]
- Exclude multipoint edges from mpls te and rsvp. [sk2]
- Mark multipoint edges. [sk2]
- Mark multipoint edges. [sk2]
- Fallback to category20b colours if > 10 groups. [sk2]
- Fallback to category20b colours if > 10 groups. [sk2]
- Restore cef for ios. [sk2]
- Restore cef for ios. [sk2]
- Update doc. [sk2]
- Update doc. [sk2]
- Interface handling if specified name for servers. [sk2]
- Interface handling if specified name for servers. [sk2]
- Add lo routes. [sk2]
- Add lo routes. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Remove debug, tidy. [sk2]
- Remove debug, tidy. [sk2]
- Include linux in manifest. [sk2]
- Include linux in manifest. [sk2]
- Add linux static routes. [sk2]
- Add linux static routes. [sk2]
- Add mpls te rules. [sk2]
- Add mpls te rules. [sk2]
- Ubuntu server class for static routes. [sk2]
- Ubuntu server class for static routes. [sk2]
- Server base class. [sk2]
- Server base class. [sk2]
- Base device class. [sk2]
- Base device class. [sk2]
- Tidying, add mpls to ios. [sk2]
- Tidying, add mpls to ios. [sk2]
- Fix ebgp session created on switch that has both ebgp and ibgp sessions. [sk2]
- Fix ebgp session created on switch that has both ebgp and ibgp sessions. [sk2]
- Adding route config rendering. [sk2]
- Adding route config rendering. [sk2]
- Tidying oo. [sk2]
- Tidying oo. [sk2]
- Add mpls code. [sk2]
- Add mpls code. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Add fn to check server asn. [sk2]
- Add fn to check server asn. [sk2]
- Add mpls callout. [sk2]
- Add mpls callout. [sk2]
- Update asn setting. [sk2]
- Update asn setting. [sk2]
- Update asn handling: copy from phy if present. [sk2]
- Update asn handling: copy from phy if present. [sk2]
- Set ipv4 and routing enabled defaults. [sk2]
- Set ipv4 and routing enabled defaults. [sk2]
- Post-collect processing. [sk2]
- Post-collect processing. [sk2]
- Remove uuid from test. [sk2]
- Remove uuid from test. [sk2]
- Reverse map for single ip. [sk2]
- Reverse map for single ip. [sk2]
- Multi-user uuid support. [sk2]
- Multi-user uuid support. [sk2]
- Tidying, adding in vrfs. [sk2]
- Tidying, adding in vrfs. [sk2]
- More collect. [sk2]
- More collect. [sk2]
- Rename collect server. [sk2]
- Rename collect server. [sk2]
- Z ordering. [sk2]
- Z ordering. [sk2]
- Node data mapping. [sk2]
- Node data mapping. [sk2]
- Inc default threads to 5. [sk2]
- Inc default threads to 5. [sk2]
- Remove interfaces from node data dump. [sk2]
- Remove interfaces from node data dump. [sk2]
- Reverse mapping ips. [sk2]
- Reverse mapping ips. [sk2]
- Pep8. [sk2]
- Pep8. [sk2]
- Allow no ip allocs. [sk2]
- Allow no ip allocs. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Allow no ip allocs. [sk2]
- Allow no ip allocs. [sk2]
- Split out functions from build_network. [sk2]
- Split out functions from build_network. [sk2]
- Allow no ip allocs. [sk2]
- Allow no ip allocs. [sk2]
- Allow no ip allocs. [sk2]
- Allow no ip allocs. [sk2]
- Move endif to end of bgp block to enable bgp to be disabled. [sk2]
- Move endif to end of bgp block to enable bgp to be disabled. [sk2]
- Add todo. [sk2]
- Add todo. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Option to disable routing protocols. [sk2]
- Option to disable routing protocols. [sk2]
- Nonzero function. [sk2]
- Nonzero function. [sk2]
- Include eigrp overlay. [sk2]
- Include eigrp overlay. [sk2]
- Remvoe debug. [sk2]
- Remvoe debug. [sk2]
- Only require specified ip for bound interfaces. [sk2]
- Only require specified ip for bound interfaces. [sk2]
- Updates. [sk2]
- Updates. [sk2]
- Add lo to eigrp v6. [sk2]
- Add lo to eigrp v6. [sk2]
- Try seperate packages if possible. [sk2]
- Try seperate packages if possible. [sk2]
- Add eigrp. [sk2]
- Add eigrp. [sk2]
- Remove debug. [sk2]
- Remove debug. [sk2]
- Update. [sk2]
- Update. [sk2]
- Misc bugfixes. [sk2]
- Latest. [sk2]
- Tidy. [sk2]
- Measure updates. [sk2]
- More collection. [sk2]
- Measurement -> collection. [sk2]
- More measure. [sk2]
- Update docs. [sk2]
- Remove unused measuremetn. [sk2]
- Measure. [sk2]
- More measure. [sk2]
- Add colorbrewer. [sk2]
- Add colorbrewer. [sk2]
- Tidying colours. [sk2]
- Tidying colours. [sk2]
- Add enable secret. [sk2]
- Measurement improvements. [sk2]
- Tidy. [sk2]
- Reorganise, ultra -> csr1000v, add hash. [sk2]
- Tidy. [sk2]
- Add server. [sk2]
- Rename icon. [sk2]
- Ultra -> CSR1000v. [sk2]
- Change mgmt interface handling. [sk2]
- More measure. [sk2]
- Update measure. [sk2]
- Tidying measurement. [sk2]
- Update user. [sk2]
- Regen autodoc. [sk2]
- Remove old measure code. [sk2]
- Working traceroute measurement. [sk2]
- Rebuild docs. [sk2]
- Change docs theme. [sk2]
- Doc -> docs. [sk2]
- Tidy. [sk2]
- Update ignore. [sk2]
- Tidying. [sk2]
- Tidying setup.py. [sk2]
- Add new platform. [sk2]
- Tidying tests. [sk2]
- Restore. [sk2]
- Add comment. [sk2]
- Zmq measurement working (needs deserialization) [sk2]
- Zmq measure. [sk2]
- Testing, deployment. [sk2]
- Pep8, fix ibgp 2 layer issues. [sk2]
- Pep8. [sk2]
- Pep8. [sk2]
- Pep8. [sk2]
- Diff testing. [sk2]
- Remove unused code. [sk2]
- Add bgp pol tests. [sk2]
- More testing. [sk2]
- Change lo_interface to a valid linux/netkit name. [Olivier Tilmans]
- Split single compiler into modular platform and device compilers. [sk2]
- Tidying. [sk2]
- Loosen path tension. [sk2]
- Add testing to setup.py. [sk2]
- More cleanup. [sk2]
- Update tests. [sk2]
- Sorting on ipv6 for stability. [sk2]
- Sort for stability. [sk2]
- Natural sorting for bgp sessions. [sk2]
- Debug. [sk2]
- Sort for repeatability. [sk2]
- Merge onepk. [sk2]
- Allocate interfaces if not allocated on input. closes gh-180. [sk2]
- Apply correct subnet to interfaces. [sk2]
- Report node label rather than node id for string representation of interface. [sk2]
- Tidy. [sk2]
- Improvements. [sk2]
- Remove debug. [sk2]
- Fix issue with secondary loopbacks. [sk2]
- Tidy. [sk2]
- Store label on json. [sk2]
- More 3d. [sk2]
- More 3d. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- 3d prototype. [sk2]
- More 3d dev. [sk2]
- More 3d dev. [sk2]
- Three js dev. [sk2]
- Tidied. [sk2]
- Ignore dev project. [sk2]
- New icon. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Dont load ip allocs, labels by default. [sk2]
- Tidy logic. [sk2]
- Tidy. [sk2]
- Tidy. [sk2]
- Tidy, rename, add servers. [sk2]
- Tidy. [sk2]
- Add todo. [sk2]
- Dev. [sk2]
Tidy. [sk2]
Split out ui. [sk2]
Isis handling. [sk2]
Setting with setattr for interface dict. [sk2]
Isis combinations. [sk2]
Better handling of ips. [sk2]
Notes. [sk2]
Split out webui. [sk2]
More work to work with interfaces directly. [sk2]
Tidying, check if bound interfaces. [sk2]
Work on ip addressing if already set. [sk2]
Ignore unbound interfaces. [sk2]
Tidying. [sk2]
Fixing ordering. [sk2]
Tidying interface if set externally. [sk2]
Clean up interface handling. [sk2]
Less cryptic names, tidying. [sk2]
Remap icons. [sk2]
Add todos, better remote interface desc. [sk2]
Copying attributes. [sk2]
Better labelling, testing of interfaces. [sk2]
Flip. [sk2]
Handling of interfaces if allocated in physical. [sk2]
Improve tension on paths. [sk2]
Dev. [sk2]
Able to search for edge by edge, used for cross-layer edge searches. [sk2]
String function ensures string. [sk2]
Interface errorr handling. [sk2]
Handle numeric node ids. [sk2]
More work on paths. [sk2]
Dev. [sk2]
Compress anm to send over wire. [sk2]
Cdp on mgmt eth. [sk2]
Add measure support. [sk2]
Add path annotations. [sk2]
Tidy. [sk2]
Fixing interface access. [sk2]
Fixing serialising. [sk2]
Fix corner-case with building trees. [sk2]
Add logging message. [sk2]
Merge pull request #179 from sk2/custom-folders. [Simon Knight]
Custom folders
Work on new measure framework. [sk2]
Initial work. [sk2]
Toggle. [sk2]
Remap the interfaces back to nodes, and integers. [sk2]
Hash on edges. [sk2]
- Fix bug with nx-os. [sk2]
- Better hashing for cross-layer and cross-anm/nidb interface comparison. [sk2]
- Add quiet (non verbose) option. [sk2]
- Test for presence in vrf graph. [sk2]
- Only add vrfs if at least one node has been tagged with vrf tag. [sk2]
- Turn web json stream back to anm/nidb. [sk2]
- Ospfv3 on loopback zero. [sk2]
- Tidy. [sk2]
- Add servers to igp. [sk2]
Disable bundled vis. [sk2]
Update demo notebook. [sk2]
Support for specific packages. [sk2]
Update template. [sk2]
Ignore ds store. [sk2]
Add key filename support. [sk2]
Split out args so can call programatically. [sk2]
arg_string = "-f %s --deploy" % input_file args = console_script.parse_options(arg_string) console_script.main(args)
Mark ipv4/ipv6 per interface, numeric ids. [sk2]
Add l3 conn graph, use for vrfs. [sk2]
Add dump. [sk2]
Update entry point. [sk2]
Update ignore. [sk2]
Add tests. [sk2]
Tidying compiler for interfaces. [sk2]
Tidying, add option to force ank vis, add info message if single user mode activated. [sk2]
Update to command line argument parsing. [sk2]
Remove testing uuid. [sk2]
Remove unused imports. [sk2]
More multi-user support. [sk2]
Tidy. [sk2]
Use shorter uuid - less unique, but more usable. still unlikely to collide for our purposes. [sk2]
Send uuid with highlight. [sk2]
Tidy, add support for muti user. [sk2]
Multi-user vis support. [sk2]
Add todo. [sk2]
Dont monitor build_network (won't work if using as module) [sk2]
Add uuid support. [sk2]
Support uuid. [sk2]
Remove messaging call. [sk2]
Remove highlight call. [sk2]
Tidy. [sk2]
Tidy. [sk2]
- Use green for verified paths. [sk2]
- Use green for verified paths. [sk2]
- Use autonetkit_cisco web content if present. [sk2]
- Exception handling. [sk2]
- Add logging message. [sk2]
- Add logging message. [sk2]
- Fix logging. [sk2]
- Update demos. [sk2]
- Markdown extension of md not mmd. [sk2]
- Readme from .txt -> mmd. [sk2]
- Retry as markdown. [sk2]
- Add badge count using. [sk2]
- Demo updates. [sk2]
- More work on demo. [sk2]
- Further improved numeric vm id shutdown. [sk2]
- New demo notebook. [sk2]
- Clean paths on redraw. [sk2]
- Handle numeric vm ids. [sk2]
- Dhcp management. [sk2]
- Add output target. [sk2]
- Fix global settings. [sk2]
- Add todo. [sk2]
- Updates to notebook. [sk2]
- Restore ui elements. [sk2]
- Link highlights behind nodes. [sk2]
- Add onepk stanza. [sk2]
- Updates. [sk2]
- Updates. [sk2]
- Demo notebook. [sk2]
- Highlight path colour. [sk2]
- Logging, highlight path colour. [sk2]
- Bugfix for highlights. [sk2]
- Bugfix. [sk2]
- Measure. [sk2]
- Add function to map edge attr to interfaces. [sk2]
- Add code to switch on input extension. [sk2]
- Don't put clns mtu on loopbacks. [sk2]
- Enable clns mtu 1400 on isis interfaces. [sk2]
- Enable cdp per interface. [sk2]
- Enable cdp on all interfaces, rename mgmt interface. [sk2]
- Add ank_cisco to version. [sk2]
- Mpls lite support for ios. [sk2]
- Only add PE, P to mpls_ldp. [sk2]
- Use specified subnet. [sk2]
- Tidy. [sk2]
- Return interface on creation. [sk2]
- Updating ip allocations. [sk2]
- Refactored ip allocation. [sk2]
- Add comment. [sk2]
- Mgmt + cdp. [sk2]
- Management toggle. [sk2]
- Tidying. [sk2]
- Rename function. [sk2]
- Support to copy across management info. [sk2]
- Allow [] notation to set/get overlay data. [sk2]
- Fix capitalisation. [sk2]
- Tidy. [sk2]
- Fix imports. [sk2]
- Fix import errors. [sk2]
- Don't over-write infrastructure blocks, closes gh-176. [sk2]
- Add comment. [sk2]
- Ensure allocation is imported. [sk2]
- Catch value errors. [sk2]
- Fallback. [sk2]
Tidy management ips. [sk2]
Explicitly set mgmt interface label for xr and nx-os. [sk2]
Tidy. [sk2]
Different ids based on ios derivative. [sk2]
Tidy. [sk2]
Nx-os interface labels. [sk2]
Copy management subnet info if relevant. [sk2]
Tidying. [sk2]
Remove debug. [sk2]
Use "use" with icon defs, rather than redefining each time. [sk2]
based on https://groups.google.com/forum/?fromgroups=#!topic/d3-js/EtEwgOYnY6U better performance avoids the chrome caching issues
Merge pull request #124 from oliviertilmans/http_vis. [Simon Knight]
Fix a small log.info error
Fix the following error: [Olivier Tilmans]
> File "autonetkit/ank_messaging.py", line 107, in publish_data > log.info("Unable to connect to HTTP Server %s: e" % (http_url, e)) > TypeError: not all arguments converted during string formatting When trying to generate cfg's without having the visualisation server running
Treat specified interface labels per node rather than globally. [sk2]
Make labels on top of links and nodes. [sk2]
Add note. [sk2]
Dont spuriously warn on unset. [sk2]
Remove debug. [sk2]
Fix error with interface names if not allocated, eg on a lan segment. [sk2]
Remove unused code. [sk2]
Ignore html coverage output. [sk2]
Ignore coverage. [sk2]
Rename validate to ank_validate to avoid conflict with configobj and paths. [sk2]
Add IGP overlays even if not used - allows quicker test in compiler. [sk2]
Include cluster attribute for rendering. [sk2]
Show grouping for ibgp_v4 and ibgp_v6. [sk2]
Resolve merge conflicts. [sk2]
Tidy ignore. [sk2]
Fix single-node hulls: make slightly bigger so don't get printing artifacts with gap in middle. [sk2]
Merge pull request #116 from oliviertilmans/cleanup. [Simon Knight]
Minor cleanup & usage of os.path.join
Merge pull request #119 from oliviertilmans/device_type_server. [Simon Knight]
(Fix Issue #117) Using Any other non router l3device node (i.e. server) crashes ANK
Merge pull request #118 from sdefauw/master. [Simon Knight]
Bug of boolean fields in graphml solved.
Hostname is now independent from zebra. [Olivier Tilmans]
Merge branch 'device_type_server' into anycast_dns_resolver. [Olivier Tilmans]
Start zebra only if the node needs it (is a router at the moment) [Olivier Tilmans]
Added anycast ip attribute. [Olivier Tilmans]
Add anycast dns resolver support on ANK side, anycast ip's have yet to handled. [Olivier Tilmans]
- Allow the server nodes (and by extension all l3devices) to be real
netkit VM's * Make the start of the zebra daemon optional (only if one of its component is in use) * Made sure that the debug flag for BGP was only set if BGP was enabled in the node. [Olivier Tilmans]
Ensure that copy_edge_attr_from will only copy attributes from edges which are common to the two graphs. [Olivier Tilmans]
Bug of boolean fields in graphml solved. [Sébastien De Fauw]
Enforced usage of os.path.join in compiler. [Olivier Tilmans]
Remove redundant overlay creations. [Olivier Tilmans]
Clean out last of pika references. [sk2]
Tidying messaging. [sk2]
Use new format messaging. [sk2]
Using url params for routing, stripping out rabbitmq and telnet. [sk2]
Tidying up json format. [sk2]
Uncompress notebooks for easier access. [sk2]
Compress ipython notebooks. [sk2]
Remove symlink. [sk2]
Use gzip for default (smaller file size) [sk2]
Use gzip for default json. [sk2]
Remove unused data. [sk2]
Only apply ospf to interfaces bound in ospf graph. [sk2]
Remove images from tutorial. [sk2]
- Update packages to latest version. [sk2]
- Remove message pipe using telnet, support tornado 3.0.1. [sk2]
Add images. [sk2]
New module to push changes. [sk2]
Split out functions. [sk2]
Allow search on node id as well as label. [sk2]
Convert multi -> single edge graph. [sk2]
Split out functions. [sk2]
Split out functions. [sk2]
Allow select edge by nodes. [sk2]
Example notebook on OSPF cost experiments. [sk2]
Inc version. [sk2]
Split the boolean to render to_memory, and the rendered output. [sk2]
Tidying. [sk2]
Split out initialise into new function. [sk2]
New diff script to monitor and update network. [sk2]
Update. [sk2]
Modify example input. [sk2]
Add support for trace colours. [sk2]
Updates to traces. [sk2]
Index edges by src/dst pair. [sk2]
Add note. [sk2]
Comment out highlight. [sk2]
Allow access interface by numeric value (eg if from diff output) [sk2]
Add support for show ip ospf and conf t. [sk2]
Add function to diff two nidbs. [sk2]
Add basic processing (this needs to be moved to a process module) [sk2]
Increase management subnet pool for testing (this needs to be modified later) [sk2]
Don't set ibgp for grid. [sk2]
Remove extra update. [sk2]
Allow path data. [sk2]
More work on path animations. [sk2]
Animated path plotting. [sk2]
Change marker colour. [sk2]
Mapping from node id to id, ensures unique. [sk2]
Tidying. [sk2]
Improve path plotting, add markers (arrows) [sk2]
Groupings for nodes, edges, etc: can control ordering. [sk2]
Notify when receive highlight. [sk2]
Storing measured data to json. [sk2]
Improvements to automated measurement: use iteration rather than callbacks. [sk2]
Tidying, show verification results. [sk2]
Set ospf for quagga. [sk2]
Sort cd ids. [sk2]
Basic shell script to run measure periodically. [sk2]
will later be replaced with pure python script run as part of autonetkit (or autonetkit_measure) command
Data and script to replay measurements. [sk2]
New verify module. [sk2]
Sort names for split. [sk2]
Better trace highlight support. [sk2]
Add sh ip route support. [sk2]
Bugfix: only validate if anm loaded. [sk2]
Remove old code. [sk2]
Add support for parsing sh ip route from quagga. [sk2]
Support for highlight paths [node, node, ... node] [sk2]
Support for highlight paths. [sk2]
Asn 0 -> 1. [sk2]
Remove trailing comma which made loopback ip a tuple. [sk2]
Support topology data used to store data without a template to render. [sk2]
More work on oob ips. [sk2]
Better handling for non existent interfaces - eg oob added to nidb. [sk2]
Allow interfaces to be added to nidb. [sk2]
Adding oob support. [sk2]
More work on vrfs. [sk2]
Tidy .gitignore. [sk2]
Ignore .graphml files. [sk2]
New collision domain icon. [sk2]
Remove symlink that crept in. [sk2]
Remove point-to-point config statement for ospf. [sk2]
Use same variable name for vpnv4. [sk2]
Tidying vrf pre-process for ibgp. [sk2]
Enforce specific packages. [sk2]
Change default edge color. [sk2]
Send ipv4 infra as json. [sk2]
Convert areas to strings for serializing keys. [sk2]
Add docstrings. [sk2]
Sort returned json keys. [sk2]
Continued vrfs. [sk2]
Ibgp vrf. [sk2]
Work on vrfs and bgp sessions, tidied up bgp sessions. [sk2]
More work on bgp vrfs. [sk2]
More work on vrfs. [sk2]
Remove debugging. [sk2]
Add to mpls ldp if bound in that overlay. [sk2]
Copy description as well as type from anm. [sk2]
Add todo. [sk2]
Smaller interface labels. [sk2]
Allow access to interface from nidb. [sk2]
Remove testing code. [sk2]
Work on vrfs, mpls ldp. [sk2]
Work on mpls, vrfs, mpls ldp. [sk2]
Fix issue with interface descriptions for secondary loopbacks. [sk2]
Copy interface ids back from nidb to anm overlays, condense to brief for brevity. [sk2]
Update doc, work on json tree for nidb. [sk2]
Merge pull request #115 from sk2/master. [Simon Knight]
merge back to interfaces
Merge pull request #114 from sk2/validate. [Simon Knight]
add validation tests for ipv4
Merge pull request #113 from sk2/interfaces. [Simon Knight]
Interfaces
Add validation tests for ipv4. [sk2]
Initial commit of validate. [sk2]
Remove specific code, works under generic interface attributes. [sk2]
Add hooks for validate enable/disable. [sk2]
Workaround to import validate from python system, namespace clash with using validate inside ank. [sk2]
Shortcut to check if interface is physical. [sk2]
Interface font size. [sk2]
Simpler cd icon. [sk2]
More work on vrfs. [sk2]
Generic interface overlay groupings (to support vrfs and ospf in consistent format, will auto adapt) [sk2]
V6 secondary loopback alloc. [sk2]
Add shortcuts to interface iteration by type. [sk2]
Fix comment. [sk2]
Define lt for interface comparisons. [sk2]
Optional handling of secondary loopbacks. [sk2]
Tidy. [sk2]
Copying v4 and v6 ips for secondary loopbacks. [sk2]
Tidying vrf interfaces. [sk2]
Merge pull request #112 from sk2/interfaces. [Simon Knight]
Interfaces
Ipv4/v6 switches. [sk2]
More work on tidying v4, v6, interfaces, testing. [sk2]
More interface hulls. [sk2]
Tidy icons. [sk2]
Debug. [sk2]
Inc ver. [sk2]
Update. [sk2]
New icon. [sk2]
Interface hulls. [sk2]
Bugfixes. [sk2]
Add accessors for physical and loopback access. [sk2]
More work on interfaces. [sk2]
Fix ibgp layering. [sk2]
More interface work. [sk2]
More interfaces. [sk2]
More interface work. [sk2]
More work on interfaces. [sk2]
More work on interfaces: datastructures, api, build, compile. [sk2]
Fixes for interfaces. [sk2]
Partial code for interface groupings eg for ospf areas. [sk2]
Working interface mappings in nidb. [sk2]
Remove debug. [sk2]
Copying across interface type to nidb. [sk2]
Interface dev. [sk2]
Adding notes. [sk2]
Fix order: first param if using args eg ("description") is desc not type. [sk2]
Fix bug: need to test overlay_id is phy, not node_id is phy. [sk2]
Fix docstring. [sk2]
Add note. [sk2]
Return type. [sk2]
Tidy. [sk2]
Remove unneeded check (as fixed bug in ank split) [sk2]
Fix bug: was copying interface id from src rather than dst. [sk2]
Add todo. [sk2]
Add todo. [sk2]
Expand out _interfaces for edges. [sk2]
More dev work on interfaces. [sk2]
Looking up interfaces in nidb. [sk2]
Better adding edges to nidb if from cd vs switch. [sk2]
Better adding edges to nidb if from cd vs switch. [sk2]
Edge comparisons. [sk2]
Debug. [sk2]
Workarounds for multipoint ospf. [sk2]
Workarounds for multipoint ospf. [sk2]
Merge pull request #111 from sk2/multipoint. [Simon Knight]
Multipoint
Make single-node groups less bubble-y. [sk2]
Tidy. [sk2]
Update ebgp to handle switches. [sk2]
Fix bugs in explode. [sk2]
Fix multipoint ebgp session handling to obtain ips. [sk2]
Switch support for isis, ospf, ebgp. [sk2]
Handle connected components. [sk2]
Concat rather than nested lists. [sk2]
Add todo. [sk2]
Fix support for wrapping exploded edges. [sk2]
Look at neighbouring routers. [sk2]
Only look at neighbouring routers for vrf (handles switches, other devices) [sk2]
Fix bug where passing in empty list would fall back to all nodes in graph. [sk2]
now check if nbunch is None rather than evaluating to False (which was case for empty list)
Merge pull request #110 from sk2/master. [Simon Knight]
merge updates back to vrf branch
Fix issue with ibgp levels. [sk2]
More work on interfaces. [sk2]
Updating interface support. [sk2]
Testing code for interfaces. [sk2]
Testing code for interfaces. [sk2]
Correct returning edges to use new interface binding format of {node_id: interface_id} [sk2]
Access corresponding interface across overlays (if exists) [sk2]
String repr of anm. [sk2]
New function for testing if overlay present in anm. [sk2]
Retain relevant interface bindings when splitting edges. [sk2]
Merge pull request #108 from sk2/multi-edge. [Simon Knight]
Multi edge
Inc ver. [sk2]
Fix problem with one or two collision domain ASes. [sk2]
Handle case of AS with no iBGP nodes (all set to ibgp_role of None) [sk2]
Updates. [sk2]
Fix correct image. [sk2]
Fix right version. [sk2]
Update. [sk2]
Updates. [sk2]
Updates. [sk2]
More updates. [sk2]
Updates. [sk2]
Updates. [sk2]
Updates. [sk2]
Revert change. [sk2]
Move to work with online notebook viewer. [sk2]
Update images, add images to tutorial. [sk2]
Update tutorial. [sk2]
Increase timeout. [sk2]
Add tutorial graphml. [sk2]
Add tutorial images. [sk2]
Remove debug. [sk2]
Update tutorial. [sk2]
Inc ver. [sk2]
Updates. [sk2]
Use ipv4 not ip. [sk2]
Tidy. [sk2]
New path colours. [sk2]
Handling starting and lab started. [sk2]
Better debug. [sk2]
Use ipv4 overlay. [sk2]
Add todo. [sk2]
Tidying, add option for grid. [sk2]
Default ospf cost. [sk2]
Ensure ospf cost is int. [sk2]
Add 2d grid. [sk2]
Bugfix. [sk2]
More work on vrfs. [sk2]
Remove website (has been moved to gh-pages branch) [sk2]
Inc ver. [sk2]
Closes gh-91. [sk2]
Extra send option. [sk2]
More explicit boolean. [sk2]
Remove debug. [sk2]
Workaround for gh-90. [sk2]
Auto list contributors from github api. [sk2]
Set default igp. [sk2]
Bugfix: dont set if node not in graph. [sk2]
Extend tutorial examples. [sk2]
Allow type casting in copy edge and node attribute functions. [sk2]
Update tutorial. [sk2]
Add tutorial. [sk2]
Move to gist. [sk2]
More notebook updates. [sk2]
Update workbook. [sk2]
Example ipython notebook. [sk2]
Highlights for nodes and edges. [sk2]
Inc ver. [sk2]
White body for printing. [sk2]
Merge ospf areas back into general function. [sk2]
Search for edges based on src/dst string ids. [sk2]
Simplified access to update http. [sk2]
Add shortcuts to common classes/functions. [sk2]
Merge pull request #88 from metaswirl/master. [Simon Knight]
First pull request :)
Merge pull request #89 from bhesmans/fixCache. [Simon Knight]
fixe cache issue.
Fixe cache issue. [Hesmans Benjamin]
Won't render otherwise the two path joined were both absolute. Now, use relative "base" isntead of full_base to build the base_cache_dir
Cleaned comments. [Niklas Semmler]
Added isis support to quagga, fixed a bug in the renderer. [Niklas Semmler]
Tidying code. [sk2]
Add offset to fix truncating of curved edges to boxes in 2 node group plots. [sk2]
Fix ordering of functions. [sk2]
Tidy. [sk2]
Pep8, tidying. [sk2]
Tidying. [sk2]
Tidying vrfs. [sk2]
Merge pull request #86 from sk2/vrf. [Simon Knight]
Vrf support, misc bugfixes + improvements
Fix merge. [sk2]
Auto set ce. [sk2]
Remove todo. [sk2]
Merge pull request #85 from bhesmans/fixRRClientAS. [Simon Knight]
quick fix for RR: no remote as.
Remove offset. [sk2]
Vrfs. [sk2]
Bugfix. [sk2]
Handle socket in use. [sk2]
Quick fix for RR: no remote as. [Hesmans Benjamin]
Work on caching. [sk2]
Use set comprehensions. [sk2]
Tidy. [sk2]
Move utility function. [sk2]
Code tidy. [sk2]
Pep8. [sk2]
Merge pull request #65 from oliviertilmans/master. [Simon Knight]
Clear out .svn subdir from doc/source/reference/
Updated gitignore to avoid further accidental tracking of .svn subdirs. [Olivier Tilmans]
Removed svn subdir. [Olivier Tilmans]
Ios v6 isis. [sk2]
Add template error rendering. [sk2]
Ospfv3 on ios. [sk2]
Tidy status output. [sk2]
Marking for ospf v3. [sk2]
Attempts to tidy zoom. [sk2]
Increment version. [sk2]
Fix indent, add process id for isis. [sk2]
Bugfix: 126 ->128 bit v6 loopbacks. [sk2]
More work on interfaces, secondary loopbacks, vrfs. [sk2]
More interface support. [sk2]
Allocate to secondary loopbacks. [sk2]
Initial vrf block. [sk2]
More vrf. [sk2]
Improved interface handling. [sk2]
Update github link ank_v3_dev -> autonetkit. [sk2]
More work on interfaces: store on physical graph if node exists in it. allows consistent interfaces across layers. [sk2]
Toggle filter. [sk2]
Neater filter. [sk2]
Inc ver. [sk2]
Toggle filter. [sk2]
Add extra log message. [sk2]
Load opacity on enter. [sk2]
Filter long attribute lists. [sk2]
Remove debug. [sk2]
Node filtering. [sk2]
Work on filtering opacity. [sk2]
Increment version. [sk2]
Check l3 cluster for ibgp, tidy syntax. [sk2]
Fix quagga. [sk2]
Work on interfaces. [sk2]
Attribute filtering for neighbors. [sk2]
Take icon size into account for auto scaling. [sk2]
Add grouping for vrf. [sk2]
Interfaces: adding with attributes, filtering on attributes, iteration. [sk2]
Error handling. [sk2]
Adding vrf config. [sk2]
Tidy v6 access, format for consistency. [sk2]
Renaming ip -> ipv4, ip6 -> ipv6. [sk2]
Only configure v4 or v6 address blocks if v4 or v6 respectively is enabled. [sk2]
Add note. [sk2]
Fix ipv4 var. [sk2]
Tidy debug. [sk2]
More work on nx_os. [sk2]
Initial work for nxos. [sk2]
Updates to allow dual-stack for cisco. [sk2]
Update scale for resized initial. [sk2]
Inc version. [sk2]
Tidy syntax. [sk2]
Tidying example access syntax. [sk2]
Better default scale for large topologies. [sk2]
Rename icon to descriptive label. [sk2]
Fix var names. [sk2]
Fix order of description. [sk2]
Set config dir, fix chassis. [sk2]
Add todo note. [sk2]
Fix error handling. [sk2]
Default to memory. [sk2]
Fix quagga ip format. [sk2]
Set dynagen config directory. [sk2]
Tidy dynagen. [sk2]
Toggle off v6. [sk2]
Use 7200 image. [sk2]
Add functions to nidb to be closer to anm. [sk2]
Ospf cost support. [sk2]
Enable v6. [sk2]
Fix level support for ibgp from yed. [sk2]
Update add_edge attr. [sk2]
Update. [sk2]
Initial commit of dynagen code for gh-46. [sk2]
Handle no ip6 graph. [sk2]
Remove overlay_accessor: use either anm['overlay_id'] or G_a.overlay("overlay_id") [sk2]
Access overlay directly. [sk2]
Support v6. [sk2]
Support v6. [sk2]
Add groupby independent of subgraph. [sk2]
Add library for # [sk2]
Info -> debug. [sk2]
Increment version. [sk2]
Add # library. [sk2]
Tidy logic, add l3 to ibgp clustering. [sk2]
Look for correct package name. [sk2]
Tidy. [sk2]
Tidying, adding from HRR->RR if same RR group. [sk2]
Add extra logging information. [sk2]
Remove debug. [sk2]
Change interface allocations. [sk2]
Simplifying. [sk2]
Tidy to use routers. [sk2]
Exclude _interfaces from edge tooltip. [sk2]
Fix websocket tooltip. [sk2]
Add deploy wrapped, tidy. [sk2]
Tidy syntax. [sk2]
Tidy. [sk2]
Add routers shortcut. [sk2]
Support ibgp l1->l3 if not l2 in ibgp_l3_cluster. [sk2]
Add ignores. [sk2]
Update ignore. [sk2]
Add fonts to manifest. [Simon Knight]
Remove other deps. [Simon Knight]
Update setup. [Simon Knight]
Update version. [Simon Knight]
Update icons folder. [Simon Knight]
Merge pull request #64 from sk2/development. [Simon Knight]
Development
Handle pika. [sk2]
Merge pull request #63 from sk2/master. [Simon Knight]
push
Merge pull request #62 from sk2/Stable. [Simon Knight]
improvements to measurement and traceroute plotting
Improvements to measurement and traceroute plotting. [sk2]
Merge pull request #61 from sk2/development. [Simon Knight]
Development
Disable measure by default. [sk2]
Remove debug. [sk2]
Add bootup circles. [sk2]
Show websocket state as icon. [sk2]
Merge pull request #60 from sk2/development. [Simon Knight]
Development
Add example. [sk2]
Merge pull request #59 from sk2/development. [Simon Knight]
Development
Remove debug. [sk2]
More features. [sk2]
Exit for paths. [sk2]
Bugfix. [sk2]
Allow direct messaging using messaging rather than manual rabbitmq construction. [sk2]
Merge pull request #58 from sk2/development. [Simon Knight]
Development
Tidy. [sk2]
Example updates. [sk2]
Bugfix. [sk2]
Measure client updates. [sk2]
Change import order. [sk2]
More updates. [sk2]
Take rmq as argument. [sk2]
Add measure client. [sk2]
Merge pull request #57 from sk2/development. [Simon Knight]
tidy
Ignore rendered. [sk2]
Tidy. [sk2]
Merge pull request #56 from sk2/development. [Simon Knight]
move example to base dir
Move example to base dir. [sk2]
Merge pull request #55 from sk2/development. [Simon Knight]
Development
Work on example. [sk2]
Update default log. [sk2]
More icon. [sk2]
Example. [sk2]
More icon. [sk2]
More icon. [sk2]
Merge pull request #54 from sk2/development. [Simon Knight]
Development
Remove egg info. [sk2]
Tidy. [sk2]
Update icon. [sk2]
Move vis folder. [sk2]
Update packaging dependencies. [sk2]
Update doc, setup config. [sk2]
Merge pull request #53 from sk2/interfaces. [Simon Knight]
Interfaces
Add dependencies. [sk2]
Add icons to ui. [sk2]
Merge pull request #52 from sk2/interfaces. [Simon Knight]
Interfaces
Update icon. [sk2]
Remove old messaging package. [sk2]
Merge pull request #51 from sk2/interfaces. [Simon Knight]
Interfaces
Move to examples directory. [sk2]
Add zoom fit button. [sk2]
Update vis layout. [sk2]
Update year, add favico to website. [sk2]
Icon data. [sk2]
Update icon. [sk2]
Auto zoom, remove interfaces and labels. [sk2]
Dont hide labels. [sk2]
Add icon. [sk2]
Remove unused messaging. [sk2]
Ui tidy. [sk2]
Revert. [sk2]
Auto hide revisions, tidy general ui, remove interfaces with toggle. [sk2]
Tidying. [sk2]
Merge pull request #50 from sk2/interfaces. [Simon Knight]
Merge
Add docs to repo. [sk2]
Remove unused python package. [sk2]
Add note. [sk2]
Add icon. [sk2]
Add todo. [sk2]
Better node handling. [sk2]
Remove debug. [sk2]
Tidying. [sk2]
Simpler add edges wrapper. [sk2]
Tidy manifest. [sk2]
Set default for blank labels, better handling of non-unique labels: if so then set with asn. [sk2]
Handle multi-as from zoo. [sk2]
Tidying. [sk2]
Add ip. [sk2]
Processing for nren 1400. [sk2]
Simple example. [sk2]
More example. [sk2]
More examples. [sk2]
Set False for yEd exported booleans (by default not present on a node) [sk2]
Tidy simple. [sk2]
Add retain to adding nodes through add_overlay. [sk2]
Add build option. [sk2]
Tidy simple example. [sk2]
Add examples. [sk2]
Tidy logic. [sk2]
New simplified example. [sk2]
Tidy, toggle out publishing v6 topology. [sk2]
Use new add overlay format. [sk2]
Add ability to add nodes at overlay creation. [sk2]
Merge pull request #43 from sk2/interfaces. [Simon Knight]
Interfaces
V6 overlay support and allocation done. [sk2]
Optional server param for messaging: not required if using http post, as picked up from settings. [sk2]
Adding ipv6 support. [sk2]
Increment version. [sk2]
Support import of cisco templates. [sk2]
Move more cisco specific code out. [sk2]
Move cisco specific load and deploy to autonetkit_cisco module. [sk2]
Update doc. [sk2]
Increment. [sk2]
Ensure area is string. [sk2]
Initial work on highlighting shared interfaces (eg loopback0) [sk2]
Tidy. [sk2]
Tidy. [sk2]
Remove unused allocate_hardware. [sk2]
Add interface labels. [sk2]
Tidying debug. [sk2]
More interfaces. [sk2]
More improvements to interfaces. [sk2]
More work on interfaces - work in progress. [sk2]
More work on vis. [sk2]
Display interfaces for directed edges. [sk2]
Bigger font for edges. [sk2]
Much improved directed edges, now with labels on the edge. [sk2]
Redoing directed edges. [sk2]
Dev. [sk2]
Dev. [sk2]
Disable zoom. [sk2]
Initial work on dynamic zooming. [sk2]
Remote message pipe from setup guide. [sk2]
Merge pull request #40 from sk2/interfaces. [Simon Knight]
tidy
Tidy. [sk2]
Merge pull request #39 from sk2/interfaces. [Simon Knight]
Interfaces
Disable full hostnames. [sk2]
Increment version. [sk2]
Lower node labels. [sk2]
Lower node labels. [sk2]
Tidy. [sk2]
Tidy. [sk2]
Better option to disable edge labels. [sk2]
Don't display interfaces. [sk2]
Better handling of interfaces in tooltip. [sk2]
Add option to disable edge labels. [sk2]
Tidy area zero handling. [sk2]
Handle ip address format for ospf areas. [sk2]
Tidy, todos. [sk2]
Correct rendering of arrays in tooltips. [sk2]
Interface toggle. [sk2]
More improvements for interfaces. [sk2]
Better interface vis. [sk2]
Add interfaces to anm, render interfaces on vis. [sk2]
Store ospf areas on node. [sk2]
Upgrade d3 from v2 to v3. [sk2]
Use v3 of d3, hide history buttons. [sk2]
Alignment, grouping for ospf areas. [sk2]
Tidy. [sk2]
Correct docstring. [sk2]
Merge pull request #38 from sk2/dev. [Simon Knight]
default netkit render
Default netkit render. [sk2]
Merge pull request #37 from sk2/dev. [Simon Knight]
better web message
Better web message. [sk2]
Merge pull request #36 from sk2/dev. [Simon Knight]
Dev
Ignore. [sk2]
Add tornado to base dependencies. [sk2]
Error handling. [sk2]
Error handling if no input file. [sk2]
Better desc string. [sk2]
Disable pika requirement for base install. [sk2]
Enable http post by default. [sk2]
Merge pull request #35 from sk2/dev. [Simon Knight]
Merge latest updates
Set input label for other device types, used in post-processing module. [Simon Knight]
Support manually specified interface names. [Simon Knight]
Tidy. [Simon Knight]
Support manually specified interface names. [Simon Knight]
New messaging module. [Simon Knight]
Better error handling for invalid category ids. [Simon Knight]
Fix syntax error in logging. [Simon Knight]
Add end statement. [Simon Knight]
Handle extra attribute. [Simon Knight]
Copy across extra attribute. [Simon Knight]
Support for specified interface names. [Simon Knight]
Tidying. [Simon Knight]
Update look and feel. [Simon Knight]
Rename ank_pika to more generic messaging module. [Simon Knight]
Increment version. [Simon Knight]
Add new icons. [Simon Knight]
Tidy http post, support manually specified IPs. [Simon Knight]
Updates to logging. [Simon Knight]
Merge pull request #34 from sk2/dev. [Simon Knight]
iBGP hierarchies, HTTP Post to update web ui
Tweak line offsets. [Simon Knight]
Support HTTP POST for updating topologies. [Simon Knight]
Fix indent. [Simon Knight]
Group by l3 cluster. [Simon Knight]
Tweaks to vis. [Simon Knight]
Update taper. [Simon Knight]
More tapered edges. [Simon Knight]
Update ignore. [Simon Knight]
Tidy neighbors. [Simon Knight]
Ibgp hierarchies. [Simon Knight]
Tapered edges. [Simon Knight]
Merge pull request #33 from sk2/dev. [Simon Knight]
route reflectors
Corrections to iBGP. [Simon Knight]
Seperate out address classes. [Simon Knight]
Seperate out address classes. [Simon Knight]
Remove debug. [Simon Knight]
Route reflectors. [Simon Knight]
Merge pull request #32 from sk2/dev. [Simon Knight]
IOS IGP, bugfix for single-AS loopbacks
Fix single-AS loopbacks. [Simon Knight]
Hover for ip address nodes. [Simon Knight]
Interface type. [Simon Knight]
Tidy. [Simon Knight]
Fix network format. [Simon Knight]
Merge pull request #31 from sk2/dev. [Simon Knight]
Dev
Add isis support to ios. [Simon Knight]
Tidy. [Simon Knight]
Merge pull request #30 from sk2/dev. [Simon Knight]
Dev
Issue with configspec, update areas. [Simon Knight]
Set syntax from config defaults. [Simon Knight]
Merge pull request #29 from sk2/dev. [Simon Knight]
fixes to ios config, interface naming, separate loopback IP groups: don't allocate 10.0.0.0 etc as a loopback
Seperate loopback groups: don't allocate 10.0.0.0 as a loopback. [Simon Knight]
Allocated loopbacks in a group: don't want 10.0.0.0 as a loopback ip. [Simon Knight]
Add point-to-point to networks. [Simon Knight]
Id format Ethernet x/0. [Simon Knight]
Option to toggle timestamp in rendered output. [Simon Knight]
Handle socket error with warning. [Simon Knight]
Merge pull request #28 from sk2/dev. [Simon Knight]
website updates, add readme
Update website, add readme. [Simon Knight]
Fix github link. [Simon Knight]
Update css page references, title in using. [Simon Knight]
New website. [Simon Knight]
Merge pull request #27 from sk2/dev. [Simon Knight]
Dev
Tidy loading. [Simon Knight]
Default ospf area for graphml. [Simon Knight]
Update defaut topology for vis. [Simon Knight]
Merge pull request #26 from sk2/dev. [Simon Knight]
add edge labels, restore print css, hierarchical ospf for IOS
More hierarchical ospf config. [Simon Knight]
Ospf hierarchy. [Simon Knight]
Fix print css. [Simon Knight]
Edge labels. [Simon Knight]
Merge pull request #24 from sk2/dev. [Simon Knight]
remove debug, update github link to dev alpha
Update github link to dev alpha. [Simon Knight]
Remove debug. [Simon Knight]
Merge pull request #23 from sk2/dev. [Simon Knight]
Optional render, adding node label and edge group dropdowns, add ospf areas, tipsy for tooltips
Default area of 0. [Simon Knight]
Redrawing changed edge_group_id. [Simon Knight]
Hide infobar, larger font for yapsy. [Simon Knight]
Use tipsy for tooltips. [Simon Knight]
Add OSPF router type. [Simon Knight]
Add title on hover, tidying. [Simon Knight]
Work on ospf areas. [Simon Knight]
Support for node label and edge grouping. [Simon Knight]
Add comments. [Simon Knight]
Add dropdowns for node label and edge grouping. [Simon Knight]
Add underscore js library. [Simon Knight]
Add render option. [Simon Knight]
Merge pull request #22 from sk2/dev. [Simon Knight]
bugfix for ip if no links, add support for nested grouping in vis (used for ospf attributes)
Fix ip crash if no links. [Simon Knight]
Remove debug, copy ospf_area into "area" in ospf graph. [Simon Knight]
Support ospf areas, nested groupings. [Simon Knight]
More parameters for copy_attr_from. [Simon Knight]
Merge pull request #16 from sk2/dev. [Simon Knight]
Improvements to packaging for textfsm templates, add demo video to website, fix passive interface for quagga IGP
Add demo video. [Simon Knight]
Correct path. [Simon Knight]
Open traceroute template from package. [Simon Knight]
Use package template file. [Simon Knight]
Update textfsm include. [Simon Knight]
Include textfsm templates. [Simon Knight]
Non numeric first character for zebra hostname too. [Simon Knight]
Make sure quagga hostnames start with letter. [Simon Knight]
Passive interfaces for ebgp. [Simon Knight]
Add loopback to interfaces. [Simon Knight]
Handle empty key string. [Simon Knight]
Merge pull request #15 from sk2/dev. [Simon Knight]
Dev
Make screencasts more visible. [Simon Knight]
Change ip ranges. [Simon Knight]
Add alpha sorting for machines. [Simon Knight]
Use interface id. [Simon Knight]
Add sorting. [Simon Knight]
Add text sorting. [Simon Knight]
Start loopbacks at 172.16.127 so don't interfere with taps. [Simon Knight]
Don't clobber measure. [Simon Knight]
Less verbose messages. [Simon Knight]
Better output. [Simon Knight]
Add note. [Simon Knight]
Merge pull request #13 from sk2/dev. [Simon Knight]
drive compilation from config file
Drive compilation from config file. [Simon Knight]
Merge pull request #12 from sk2/dev. [Simon Knight]
Dev
Add publications. [Simon Knight]
Remove debug. [Simon Knight]
Neater maximise display. [Simon Knight]
Handle case of no infrastructure ips to advertise. [Simon Knight]
Allocate loopbacks seperately to infra, closes gh-10. [Simon Knight]
Add css maximise option. [Simon Knight]
Merge pull request #11 from sk2/dev. [Simon Knight]
Cleaner updating to web interface
Read updates. [Simon Knight]
Remove extra sending pika. [Simon Knight]
Remove debug. [Simon Knight]
Merge pull request #9 from sk2/dev. [Simon Knight]
Basic lat/lon to x/y from zoo, grid layout if no x/y set
Add comment. [Simon Knight]
Merge pull request #8 from sk2/dev. [Simon Knight]
Dev
Support for reading from stdin, writing single-file templates into memory. [Simon Knight]
Use argparse instead of deprecated optparse. [Simon Knight]
Support html in status: lists rather than block of text. [Simon Knight]
Merge pull request #7 from sk2/dev. [Simon Knight]
Dev
Update instructions. [Simon Knight]
Inc. [Simon Knight]
Update isis format. [Simon Knight]
Default isis metric. [Simon Knight]
Merge pull request #6 from sk2/dev. [Simon Knight]
Dev
Merge pull request #5 from sk2/master. [Simon Knight]
Dev
Dont warn if no rmq. [Simon Knight]
Merge pull request #4 from sk2/dev. [Simon Knight]
Dev
Update tutorial. [Simon Knight]
Inc. [Simon Knight]
Better handling of timestamp. [Simon Knight]
Include quagga templates. [Simon Knight]
Disable file logging for now. [Simon Knight]
Default to compile. [Simon Knight]
Don't write overlays as graphml. [Simon Knight]
Merge pull request #3 from sk2/master. [Simon Knight]
Merge website and templates
Add tutorial. [Simon Knight]
Inc ver. [Simon Knight]
Include quagga templates. [Simon Knight]
Merge pull request #2 from sk2/dev. [Simon Knight]
Better defaults and compilation
Better compilation depending on presence of platform/host. [Simon Knight]
Update graphml default. [Simon Knight]
Remove debug. [Simon Knight]
Merge pull request #1 from sk2/dev. [Simon Knight]
Dev
Add development install guide. [Simon Knight]
Increment version. [Simon Knight]
Update interface names. [Simon Knight]
Add youtube link for screencasts. [Simon Knight]
Increment version, include html data in package. [Simon Knight]
Support telnet sockets. [Simon Knight]
Use new load module. [Simon Knight]
More visible trace data. [Simon Knight]
Remove debug. [Simon Knight]
Sorting edges. [Simon Knight]
Tidying. [Simon Knight]
More visible traceroutes. [Simon Knight]
Add support for telnet. [Simon Knight]
Move vis inside distro. [Simon Knight]
Updates. [Simon Knight]
Use ank vis in distro. [Simon Knight]
Increment version. [Simon Knight]
Include vis in distro. [Simon Knight]
Increment version. [Simon Knight]
Fix naming. [Simon Knight]
Comment out dev. [Simon Knight]
Increment version. [Simon Knight]
Use correct ip for update-source. [Simon Knight]
Tidy anm sending over rabbit. [Simon Knight]
Dev. [Simon Knight]
Error handling alpha only name sorting. [Simon Knight]
More visible traces. [Simon Knight]
Updates for netkit deploy. [Simon Knight]
Use rabbitmq server from config. [Simon Knight]
Better log message. [Simon Knight]
Fix int ids. [Simon Knight]
Dev. [Simon Knight]
Update version. [Simon Knight]
Tidying. [Simon Knight]
Tidying. [Simon Knight]
Use package name. [Simon Knight]
Get correct package name for version. [Simon Knight]
Store original node label. [Simon Knight]
Update ignore for package. [Simon Knight]
Rename package version. [Simon Knight]
Add console help, version. [Simon Knight]
Remove dev. [Simon Knight]
Adding directed input graph support - useful for edge attributes. [Simon Knight]
Sort interfaces on id. [Simon Knight]
Copy edge attributes. [Simon Knight]
Edge comparisons for sorting. [Simon Knight]
Improve bgp, isis. [Simon Knight]
Better version string. [Simon Knight]
Notes. [Simon Knight]
Better ios support, isis. [Simon Knight]
Default isis process id. [Simon Knight]
Hide nav for printing. [Simon Knight]
Longer delay for monitor, optional archiving, neater json writing for diff. [Simon Knight]
Select between IGPs. [Simon Knight]
Diffing support. [Simon Knight]
Greatly improved differ. [Simon Knight]
Ignore diff. [Simon Knight]
Error message if no rabbitmq. [Simon Knight]
Disable hardware alloc for now. [Simon Knight]
Default dir. [Simon Knight]
Testing diff. [Simon Knight]
Handle sets. [Simon Knight]
More on interfaces. [Simon Knight]
Add graphics data. [Simon Knight]
Setting group attr. [Simon Knight]
Better error handling, retain of node id. [Simon Knight]
Tidy. [Simon Knight]
More dev. [Simon Knight]
Basic interface icon. [Simon Knight]
More testing for hw. [Simon Knight]
Add remove_node fn. [Simon Knight]
More hw alloc. [Simon Knight]
Handle empty overlays. [Simon Knight]
Adding conn graph. [Simon Knight]
Graph based hardware. [Simon Knight]
Change zoom. [Simon Knight]
Group by device for conn graph. [Simon Knight]
Add hash for set comparison, accessor for anm, option to add node, option to not clobber adding nodes, [Simon Knight]
Before switching to graph-based interface representation. [Simon Knight]
Hardware profiles. [Simon Knight]
Tidy. [Simon Knight]
Adding hardware profiles. [Simon Knight]
Tidying. [Simon Knight]
Adding standalone actions. [Simon Knight]
Policy parsing implemented, including nested if/then/else. [Simon Knight]
More policy. [Simon Knight]
More pol. [Simon Knight]
Initial policy parsing. [Simon Knight]
Fix packaging. [Simon Knight]
Handle imports better. [Simon Knight]
Remove unused dep. [Simon Knight]
Tidy. [Simon Knight]
Tidy. [Simon Knight]
Update. [Simon Knight]
Updates. [Simon Knight]
Disable sockets for now. [Simon Knight]
Adding messaging. [Simon Knight]
Update ignore. [Simon Knight]
Add cisco internal support, tidy up, update build options if updated, relay update node parameter. [Simon Knight]
Default disabled pika. [Simon Knight]
Add node label, tidy. [Simon Knight]
Relay update, support cisco internal host. [Simon Knight]
Handle disabled pika. [Simon Knight]
Restoring ios2. [Simon Knight]
Update ignore. [Simon Knight]
Exceptions class. [Simon Knight]
Add sorting. [Simon Knight]
Better exception handling. [Simon Knight]
Add internal host. [Simon Knight]
Handle non .graphml. [Simon Knight]
Todo. [Simon Knight]
Change sizes. [Simon Knight]
Ignore. [Simon Knight]
Remove. [Simon Knight]
Tidying. [Simon Knight]
Moved ip to be native networkx graph based. [Simon Knight]
More tidying compiler. [Simon Knight]
Keeping track of parent to update dicts. [Simon Knight]
Nidb access methods needing work - can't modify dictionary accessors. [Simon Knight]
Before updating interface format. [Simon Knight]
Search by edge id. [Simon Knight]
Append as kwargs. [Simon Knight]
Moving to integrated lists. [Simon Knight]
Tidy. [Simon Knight]
Put in list (expected format) [Simon Knight]
Don't clobber host attribute from switches bugfix. [Simon Knight]
Adding sorting to tidy up compiler. [Simon Knight]
Allocate ip not subnet to loopback. [Simon Knight]
Add area back. [Simon Knight]
Better vis, moving towards twitter bootstrap, scalable with resizing. [Simon Knight]
Tidying formatting. [Simon Knight]
Minimum of one rr per AS. [Simon Knight]
Better transition from overlay -> ip allocs. [Simon Knight]
Add node sorting for anm, placeholder for nidb. [Simon Knight]
More ip progress. [Simon Knight]
Ip addressing working. [Simon Knight]
More ip. [Simon Knight]
Add option to search for edge by node pair. [Simon Knight]
Tidy. [Simon Knight]
Use neighbors from overlay. [Simon Knight]
Better ip vis. [Simon Knight]
Testing radial layout. [Simon Knight]
More addressing. [Simon Knight]
More ip addressing. [Simon Knight]
More ip addressing. [Simon Knight]
Redoing IP allocation to be digraph (DAG) based. [Simon Knight]
Better plotting. [Simon Knight]
Transitions for updated ip data. [Simon Knight]
Tidying, adding support for ip allocation plotting. [Simon Knight]
Add demo to website. [Simon Knight]
Remove debug. [Simon Knight]
Remove debug. [Simon Knight]
More config driven. [Simon Knight]
Use standard folder format. [Simon Knight]
Turn down base logging (fixes verbose paramiko) [Simon Knight]
Tidy. [Simon Knight]
Use config instead of hard-coded settings. [Simon Knight]
Default boolean for general configs, add deploy hosts. [Simon Knight]
Update title with revison number. [Simon Knight]
Tidying igp. [Simon Knight]
Move deploy to directory. [Simon Knight]
Measure directory. [Simon Knight]
More isis support. [Simon Knight]
Ready for sorted. [Simon Knight]
Debug on key miss. [Simon Knight]
Retain data. [Simon Knight]
Isis support. [Simon Knight]
Ignore extra rendered. [Simon Knight]
Subgraph only for netkit nodes. [Simon Knight]
Remove defaults (use config) [Simon Knight]
Tidy. [Simon Knight]
Also load cisco compiler. [Simon Knight]
Defaults from config. [Simon Knight]
Defaults from config. [Simon Knight]
More concise edge adding syntax. [Simon Knight]
Debug. [Simon Knight]
Tidy ip to network entity function. [Simon Knight]
Use new graphml reader. [Simon Knight]
Better most frequent algorithm. [Simon Knight]
Split out graphml reader. [Simon Knight]
Split out graphml reader, better most frequent algorithm. [Simon Knight]
Create load module directory. [Simon Knight]
Move to load module directory, remove old caching code. [Simon Knight]
Add most frequent function, use instead. [Simon Knight]
Use loopback to create network_entity_title. [Simon Knight]
Bugfix: take most frequent ASN for inter-asn collision domains, rather than mean. [Simon Knight]
(otherwise cd between ASN 2 and 4 gets put in 3)
Add setup for pypi. [Simon Knight]
Turn down log verbosity. [Simon Knight]
Tidied, adding IS-IS support. [Simon Knight]
Better file checking, tidied up building, better monitor mode, checking if build has changed, better stack trace. [Simon Knight]
Ignore egg builds. [Simon Knight]
Default overlay of phy not ospf. [Simon Knight]
Bugfix: asn of parent not neighbor. [Simon Knight]
Render for single run mode. [Simon Knight]
Tidying. [Simon Knight]
More descriptive queue name. [Simon Knight]
Use server from config. [Simon Knight]
Better formatting,zoom. [Simon Knight]
Add zoom. [Simon Knight]
Ignore local config, crash dump. [Simon Knight]
Read from config. [Simon Knight]
Default localhost. [Simon Knight]
Default localhost. [Simon Knight]
Hiding better layout for printing. [Simon Knight]
Better layout. [Simon Knight]
Fix fast-forward, add hidden option for printing each history revision. [Simon Knight]
Update title with revision id. [Simon Knight]
Added clarity for comparison. [Simon Knight]
Add arrows, full history support. [Simon Knight]
Use global config settings. [Simon Knight]
Support for pika to update web ui. [Simon Knight]
Add note. [Simon Knight]
Revision back and forward. [Simon Knight]
Also turn off infobar. [Simon Knight]
Preselect correct dropdown based on overlay_id at init, add history support. [Simon Knight]
Tidy print. [Simon Knight]
Remove redundant code. [Simon Knight]
Add print css to disable nav. [Simon Knight]
Extra notes. [Simon Knight]
Tidying js in vis. [Simon Knight]
More tidying. [Simon Knight]
Tidy. [Simon Knight]
Add config file. [Simon Knight]
Tidy. [Simon Knight]
Serialize ip using json. [Simon Knight]
Tidying. [Simon Knight]
Default not to compile. [Simon Knight]
Tidy json support. [Simon Knight]
Use json instead of pickle for serializing anm. [Simon Knight]
Function to copy graphics across from anm. [Simon Knight]
Tidying compression, moving network construction to seperate module. [Simon Knight]
Move network construction into seperate module. [Simon Knight]
Abstract out pika messaging. [Simon Knight]
Restore diffing (disabled for now awaiting stable IP addressing) [Simon Knight]
Better error handling, initial support for diffs. [Simon Knight]
Work with attributes rather than anm nodes directly. [Simon Knight]
Handling nidb. [Simon Knight]
Better serialization, de-serialize ip address/ip networks in lists properly. [Simon Knight]
Don't use object references to anm nodes in nidb, use attributes eg asn, label, etc. [Simon Knight]
Save/restore nidb using pickle. [Simon Knight]
Directed edge arcs, working on arrow alignment. [Simon Knight]
Trace colour. [Simon Knight]
Plotting all traceroutes (bugfix) [Simon Knight]
Loading saved json. [Simon Knight]
Saving json. [Simon Knight]
Testing cloud (doesn't scale width well) [Simon Knight]
Add cloud icon. [Simon Knight]
Set new default. [Simon Knight]
Remove debug. [Simon Knight]
Tweaking grouping. [Simon Knight]
Grouping for single nodes, tidy. [Simon Knight]
Add hull for groups of 2 nodes. [Simon Knight]
Add compression for large anm that exceed rabbitmq max frame size. [Simon Knight]
Add compression support. [Simon Knight]
Add queue watching for debugging. [Simon Knight]
Filter out incomplete traceroutes. [Simon Knight]
Default not to compile. [Simon Knight]
Increase dimensions. [Simon Knight]
Tidy. [Simon Knight]
Json handling IP address serialization and deserialization. [Simon Knight]
Use json properly. [Simon Knight]
Example to load on webserver. [Simon Knight]
Send json not pickle to webserver. [Simon Knight]
Update overlay dropdown, remove poll code. [Simon Knight]
Tidy. [Simon Knight]
Pass json over rabbitmq rather than pickled anm - much more flexible. [Simon Knight]
Initial work to pass json anm rather than pickled anm across network to webserver. [Simon Knight]
Create dir if needed for topology (bugfix) [Simon Knight]
Extra todo note. [Simon Knight]
Don't relabel if same label (saves clobbering node data) [Simon Knight]
Visual tweaks, reload images -> stay vector. [Simon Knight]
Placeholder. [Simon Knight]
Ignore logs. [Simon Knight]
Script to update website. [Simon Knight]
Demo website redirect. [Simon Knight]
Add pop to graphics. [Simon Knight]
Smoother updates and transitions. [Simon Knight]
Tidy debug. [Simon Knight]
Visual tweaks. [Simon Knight]
Handle if no version number. [Simon Knight]
Problems with pika sending anm. [Simon Knight]
Tidy. [Simon Knight]
Better parsing and rmq messages on starting and launched. [Simon Knight]
Nicer trace colours. [Simon Knight]
Turn off compile by default. [Simon Knight]
Handle paths. [Simon Knight]
Add path for traceroutes. [Simon Knight]
Fix traceroutes. [Simon Knight]
Placeholder for webserver. [Simon Knight]
Remove debug. [Simon Knight]
Change status font, don't list id in attributes. [Simon Knight]
Remove need for full ank install (better for remote servers) [Simon Knight]
Tidy debug, better info messages. [Simon Knight]
Add more icons. [Simon Knight]
Websocket live updates working. [Simon Knight]
Add rmq support. [Simon Knight]
Debugging. [Simon Knight]
Extra note. [Simon Knight]
Moving to entirely websocket, no polling. [Simon Knight]
Removing outdated webserver. [Simon Knight]
Fix bug in monitoring. [Simon Knight]
Better hull updates, status labels, general tidy, [Simon Knight]
Better handling of no template attribute set. [Simon Knight]
Fix grouping hulls. [Simon Knight]
Update monitor mode. [Simon Knight]
Better log output. [Simon Knight]
Exception handling. [Simon Knight]
Dynamic websocket url. [Simon Knight]
Update label, select node from available nodes rather than hard-coded. [Simon Knight]
Basic process error handling. [Simon Knight]
Add support for http. [Simon Knight]
Support tornado based web. [Simon Knight]
Fix label naming, [Simon Knight]
Moving webapp to single script, entirely in tornado. [Simon Knight]
Don't run graph products if no template set. [Simon Knight]
Remove debug. [Simon Knight]
Remove debug. [Simon Knight]
Graph products working. [Simon Knight]
Remove debug. [Simon Knight]
Remove debug. [Simon Knight]
More graph products. [Simon Knight]
More graph products. [Simon Knight]
Plotting edges from graph products. [Simon Knight]
Bug with hull in d3. [Simon Knight]
Initial commit of graph products. [Simon Knight]
Don't try overlays on first call. [Simon Knight]
Adding graph product support. [Simon Knight]
Bugfix. [Simon Knight]
Fn to replace graph. [Simon Knight]
Move icons. [Simon Knight]
Tidying. [Simon Knight]
Tidy icons. [Simon Knight]
Tidying viz. [Simon Knight]
More trace route parsing. [Simon Knight]
Better trace route vis. [Simon Knight]
Neater save/restore. [Simon Knight]
Turn down debug. [Simon Knight]
Nidb save/restore. [Simon Knight]
Visualize ip allocs. [Simon Knight]
Tidy. [Simon Knight]
Neater pickle. [Simon Knight]
Path plotting in d3. [Simon Knight]
More d3. [Simon Knight]
More rabbitmq/json/websockets/d3. [Simon Knight]
Bgp working, adding rmq sending of trace routes to d3. [Simon Knight]
List machines in lab - don't just boot all folders. [Simon Knight]
Log booting machines. [Simon Knight]
Connect to interface not loopback ip for ebgp. [Simon Knight]
Options for compile, deploy, measure. [Simon Knight]
Add file logging. [Simon Knight]
Fix issue where multiple threads create folder at same time. [Simon Knight]
Use ethernet address for next-hop as workaround to DENIED due to: non- connected next-hop; [Simon Knight]
Ebgp DENIED due to: non-connected next-hop. [Simon Knight]
Add static loopback routes for bgp. [Simon Knight]
Fix indent. [Simon Knight]
Fix warning. [Simon Knight]
Fix bgp network advertisement. [Simon Knight]
Fixing ebgp for traceroutes. [Simon Knight]
Adding extra measurement functions. [Simon Knight]
End-to-end deployment using exscript, measurement using exscript/rmq, and parsing using textfsm. [Simon Knight]
More rmq measurement. [Simon Knight]
Adding rmq remote measurement. [Simon Knight]
More textfsm. [Simon Knight]
With initial textfsm processing of sh ip route. [Simon Knight]
Trying to capture routing output using exscript templates. [Simon Knight]
Collecting data from hosts. [Simon Knight]
Fixing bgp config. [Simon Knight]
Fixing netkit routing. [Simon Knight]
Use remote interface ip for eBGP not loopback. [Simon Knight]
Fix issue with single dst node being treated as string for set. [Simon Knight]
More netkit deploy improvements. [Simon Knight]
Fixing netkit deployment. [Simon Knight]
Remove previous lab dirs. [Simon Knight]
Testing deployment. [Simon Knight]
Testing. [Simon Knight]
Better deployment. [Simon Knight]
Don't save ip allocs -> speed. [Simon Knight]
Fix up naming. [Simon Knight]
Recommit. [Simon Knight]
Update ignore. [Simon Knight]
Better formatting. [Simon Knight]
Support host keys. [Simon Knight]
Use nklab not netkit as folder, support for host keys. [Simon Knight]
Add nonzero for nodes, fix subtle issue with evaluation nonzero for None values in nidb_node_category. [Simon Knight]
Update template names. [Simon Knight]
Pass Network name to nidb. [Simon Knight]
Sort rendering. [Simon Knight]
Default name handling. [Simon Knight]
Ignore graphmls. [Simon Knight]
Tidying, add ssh. [Simon Knight]
Copy Network for zoo graphs. [Simon Knight]
New function to copy attributes from one overlay to another. [Simon Knight]
Remove debug. [Simon Knight]
Different folder naming structure. [Simon Knight]
Dump graph attributes. [Simon Knight]
New naming functions. [Simon Knight]
Fixes. [Simon Knight]
Writing collision domains. [Simon Knight]
Update ignore. [Simon Knight]
Remove built docs. [Simon Knight]