-
Hello, // // =================== // =========================== void startCameraServer(); void setup() { camera_config_t config; // if PSRAM IC present, init with UXGA resolution and higher JPEG quality #if defined(CAMERA_MODEL_ESP_EYE) // camera init sensor_t * s = esp_camera_sensor_get(); #if defined(CAMERA_MODEL_M5STACK_WIDE) || defined(CAMERA_MODEL_M5STACK_ESP32CAM) #if defined(CAMERA_MODEL_ESP32S3_EYE) // Setup LED FLash if LED pin is defined in camera_pins.h WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { startCameraServer(); Serial.print("Camera Ready! Use 'http://"); void loop() { Thank you for your help in advance. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 4 replies
-
the error suggests that the driver can not find the sensor. That is usually due to bad pin config. make sure that your sccb pins are correct |
Beta Was this translation helpful? Give feedback.
the error suggests that the driver can not find the sensor. That is usually due to bad pin config. make sure that your sccb pins are correct