Update tinyusb dcd_dwc2

Author: me-no-dev

components/arduino_tinyusb/patches/dcd_dwc2.patch

@@ -17,11 +17,12 @@
 
  static void edpt_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) {
    dwc2_regs_t* dwc2 = DWC2_REG(rhport);
-@@ -336,7 +346,18 @@
-     dwc2->epout[epnum].doepctl = dxepctl;
-     dwc2->daintmsk |= TU_BIT(DAINTMSK_OEPM_Pos + epnum);
-   } else {
--    dwc2->epin[epnum].diepctl = dxepctl | (epnum << DIEPCTL_TXFNUM_Pos);
+@@ -332,7 +342,19 @@
+                    (p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? DOEPCTL_SD0PID_SEVNFRM : 0) |
+                    (xfer->max_size << DOEPCTL_MPSIZ_Pos);
+   if (dir == TUSB_DIR_IN) {
+-    epctl |= (epnum << DIEPCTL_TXFNUM_Pos);
++    //epctl |= (epnum << DIEPCTL_TXFNUM_Pos);
 +    uint8_t fifo_num = epnum;
 +#if defined(TUP_USBIP_DWC2_ESP32)
 +    // Special Case for EP5, which is used by CDC but not actually called by the driver
@@ -33,12 +34,12 @@
 +    }
 +    //TU_ASSERT(fifo_num != 0);
 +#endif
-+    dwc2->epin[epnum].diepctl = dxepctl | (fifo_num << DIEPCTL_TXFNUM_Pos);
-     dwc2->daintmsk |= TU_BIT(DAINTMSK_IEPM_Pos + epnum);
++    epctl |= (fifo_num << DIEPCTL_TXFNUM_Pos);
    }
- }
-@@ -850,6 +871,10 @@
-     xfer_status[n][TUSB_DIR_IN].max_size = 0;
+ 
+   dwc2_dep_t* dep = &dwc2->ep[1 - dir][epnum];
+@@ -840,6 +862,10 @@
+     }
    }
 
 +#if defined(TUP_USBIP_DWC2_ESP32)
@@ -48,7 +49,7 @@
    dfifo_flush_tx(dwc2, 0x10); // all tx fifo
    dfifo_flush_rx(dwc2);
 
-@@ -1204,6 +1229,9 @@
+@@ -1186,6 +1212,9 @@
    if (int_status & GINTSTS_USBRST) {
      // USBRST is start of reset.
      dwc2->gintsts = GINTSTS_USBRST;
@@ -58,7 +59,7 @@
      bus_reset(rhport);
    }
 
-@@ -1235,7 +1263,11 @@
+@@ -1217,7 +1246,11 @@
 
    if (int_status & GINTSTS_USBSUSP) {
      dwc2->gintsts = GINTSTS_USBSUSP;
@@ -71,7 +72,7 @@
    }
 
    if (int_status & GINTSTS_WKUINT) {
-@@ -1252,6 +1284,9 @@
+@@ -1234,6 +1267,9 @@
 
      if (otg_int & GOTGINT_SEDET) {
        dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true);