Merge branch 'master' into feature/tinyusb_host

Author: me-no-dev

configs/defconfig.common

@@ -57,6 +57,7 @@ CONFIG_LWIP_ETHARP_TRUST_IP_MAC=y
 CONFIG_LWIP_TCP_SYNMAXRTX=6
 CONFIG_LWIP_TCP_MSS=1436
 CONFIG_LWIP_TCP_RTO_TIME=3000
+CONFIG_LWIP_TCP_SACK_OUT=y
 CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=4096
 CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0=y
 CONFIG_LWIP_MAX_SOCKETS=16

configs/defconfig.esp32p4

@@ -3,6 +3,7 @@ CONFIG_SPIRAM=y
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
 CONFIG_LWIP_TCP_SACK_OUT=y
 
+# ESP-Hosted-MCU
 CONFIG_SLAVE_IDF_TARGET_ESP32C6=y
 CONFIG_ESP_SDIO_BUS_WIDTH=4
 CONFIG_ESP_SDIO_CLOCK_FREQ_KHZ=40000
@@ -13,6 +14,15 @@ CONFIG_ESP_SDIO_PIN_D1=15
 CONFIG_ESP_SDIO_PIN_D2=16
 CONFIG_ESP_SDIO_PIN_D3=17
 
+# Bluetooth through ESP-Hosted-MCU
+CONFIG_BT_ENABLED=y
+CONFIG_BT_CONTROLLER_DISABLED=y
+CONFIG_BT_BLUEDROID_ENABLED=n
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_TRANSPORT_UART=n
+CONFIG_ESP_HOSTED_ENABLE_BT_NIMBLE=y
+CONFIG_ESP_HOSTED_NIMBLE_HCI_VHCI=y
+
 # RGB Display Optimizations
 CONFIG_LCD_RGB_ISR_IRAM_SAFE=y
 CONFIG_LCD_RGB_RESTART_IN_VSYNC=y

tools/copy-libs.sh

@@ -318,16 +318,23 @@ done
 
 mkdir -p "$AR_SDK"
 
+# Keep only -march, -mabi and -mlongcalls flags for Assembler
+PIOARDUINO_AS_FLAGS=$(
+    {
+        echo "$PIOARDUINO_CXX_FLAGS" | grep -oE '\-march=[^[:space:]]*|\-mabi=[^[:space:]]*|\-mlongcalls'
+        echo "$PIOARDUINO_CC_FLAGS" | grep -oE '\-march=[^[:space:]]*|\-mabi=[^[:space:]]*|\-mlongcalls'
+    } | awk '!seen[$0]++' | paste -sd ' '
+)
+
 # start generation of pioarduino-build.py
 AR_PIOARDUINO_PY="$AR_SDK/pioarduino-build.py"
 cat configs/pioarduino_start.txt > "$AR_PIOARDUINO_PY"
 
 echo "    ASFLAGS=[" >> "$AR_PIOARDUINO_PY"
-if [ "$IS_XTENSA" = "y" ]; then
-	echo "        \"-mlongcalls\"" >> "$AR_PIOARDUINO_PY"
-else
-	echo "        \"-march=rv32imc\"" >> "$AR_PIOARDUINO_PY"
-fi
+set -- $PIOARDUINO_AS_FLAGS
+for item; do
+	echo "        \"$item\"," >> "$AR_PIOARDUINO_PY"
+done
 echo "    ]," >> "$AR_PIOARDUINO_PY"
 echo "" >> "$AR_PIOARDUINO_PY"