revert Matter for 3.0.x (#229)

* revert Matter for 3.0.x

* revert Matter for 3.0.x

* revert Matter for 3.0.x

* revert Matter for 3.0.x

* revert Matter for 3.0.x

* revert Matter for 3.0.x

* fortmatting

Author: SuGlider

CMakeLists.txt

@@ -33,8 +33,3 @@ add_custom_command(
 	VERBATIM
 )
 add_custom_target(mem-variant DEPENDS "mem_variant")
-
-##################
-### ESP Matter ###
-##################
-idf_build_set_property(CXX_COMPILE_OPTIONS "-std=gnu++17;-DCHIP_HAVE_CONFIG_H" APPEND)

configs/defconfig.common

@@ -75,14 +75,8 @@ CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
 CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT=y
 CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT=y
 CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM=y
-CONFIG_LWIP_MULTICAST_PING=y
-CONFIG_LWIP_BROADCAST_PING=y
-CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
 CONFIG_MBEDTLS_PSK_MODES=y
 CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
-CONFIG_MBEDTLS_ECJPAKE_C=y
-CONFIG_MBEDTLS_HKDF_C=y
 CONFIG_MBEDTLS_CAMELLIA_C=y
 CONFIG_MBEDTLS_GCM_SUPPORT_NON_AES_CIPHER=y
 # CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN is not set
@@ -117,13 +111,3 @@ CONFIG_ESP_COREDUMP_STACK_SIZE=1024
 CONFIG_MBEDTLS_DYNAMIC_BUFFER=y
 CONFIG_MBEDTLS_DYNAMIC_FREE_PEER_CERT=y
 CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y
-#
-# Matter Settings
-#
-# Disable Matter BLE
-CONFIG_ENABLE_CHIPOBLE=n
-CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=n
-# ESP Insights
-CONFIG_ENABLE_ESP_INSIGHTS_TRACE=n
-# Use compact attribute storage mode
-CONFIG_ESP_MATTER_NVS_USE_COMPACT_ATTR_STORAGE=y

configs/defconfig.esp32c6

@@ -8,6 +8,23 @@ CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
 #CONFIG_ULP_COPROC_LP_CORE=y
 #CONFIG_ULP_COPROC_RESERVE_MEM=4096
 
+#
+# ESP32 Arduino OpenThread Configuration
+#
+# lwIP
+#
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
+CONFIG_LWIP_MULTICAST_PING=y
+CONFIG_LWIP_BROADCAST_PING=y
+# end of lwip
+
+#
+# mbedTLS
+#
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
+CONFIG_MBEDTLS_ECJPAKE_C=y
+# end of mbedTLS
+
 #
 # OpenThread
 #

configs/defconfig.esp32h2

@@ -4,6 +4,23 @@ CONFIG_RTC_CLK_CAL_CYCLES=576
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
 CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
 
+#
+# ESP32 Arduino OpenThread Configuration
+#
+# lwIP
+#
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
+CONFIG_LWIP_MULTICAST_PING=y
+CONFIG_LWIP_BROADCAST_PING=y
+# end of lwip
+
+#
+# mbedTLS
+#
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
+CONFIG_MBEDTLS_ECJPAKE_C=y
+# end of mbedTLS
+
 #
 # OpenThread
 #

main/idf_component.yml

@@ -22,11 +22,6 @@ dependencies:
     version: ">=1.4.2"
     rules:
       - if: "target in [esp32s3]"
-  espressif/esp_matter:
-    version: "^1.3.0"
-    require: public
-    rules:
-      - if: "target not in [esp32c2, esp32h2]"
 
   # esp-sr: "^1.3.1"
   # esp32-camera: "^2.0.4"

tools/copy-libs.sh

@@ -491,17 +491,6 @@ echo -n "$LD_FLAGS" > "$FLAGS_DIR/ld_flags"
 echo -n "$LD_SCRIPTS" > "$FLAGS_DIR/ld_scripts"
 echo -n "$AR_LIBS" > "$FLAGS_DIR/ld_libs"
 
-# Matter Library adjustments
-for flag_file in "c_flags" "cpp_flags" "S_flags"; do
-	echo "Fixing $FLAGS_DIR/$flag_file"
- 	sed 's/\\\"-DCHIP_ADDRESS_RESOLVE_IMPL_INCLUDE_HEADER=<lib\/address_resolve\/AddressResolve_DefaultImpl.h>\\\"/-DCHIP_HAVE_CONFIG_H/' $FLAGS_DIR/$flag_file > $FLAGS_DIR/$flag_file.temp
-	mv $FLAGS_DIR/$flag_file.temp $FLAGS_DIR/$flag_file
-done
-CHIP_RESOLVE_DIR="$AR_SDK/include/espressif__esp_matter/connectedhomeip/connectedhomeip/src/lib/address_resolve"
-sed 's/CHIP_ADDRESS_RESOLVE_IMPL_INCLUDE_HEADER/<lib\/address_resolve\/AddressResolve_DefaultImpl.h>/' $CHIP_RESOLVE_DIR/AddressResolve.h > $CHIP_RESOLVE_DIR/AddressResolve_temp.h
-mv $CHIP_RESOLVE_DIR/AddressResolve_temp.h $CHIP_RESOLVE_DIR/AddressResolve.h
-# End of Matter Library adjustments
-
 # copy zigbee + zboss lib
 if [ -d "managed_components/espressif__esp-zigbee-lib/lib/$IDF_TARGET/" ]; then
 	cp -r "managed_components/espressif__esp-zigbee-lib/lib/$IDF_TARGET"/* "$AR_SDK/lib/"
@@ -541,7 +530,7 @@ for item; do
 	done
 done
 
-for lib in "openthread" "espressif__esp-tflite-micro" "bt" "espressif__esp_matter"; do
+for lib in "openthread" "espressif__esp-tflite-micro" "bt"; do
 	if [ -f "$AR_SDK/lib/lib$lib.a" ]; then
 		echo "Stripping $AR_SDK/lib/lib$lib.a"
 		"$TOOLCHAIN-strip" -g "$AR_SDK/lib/lib$lib.a"