bird.conf

/*
 * Tweety BIRD default configuration
 */

# This pseudo-protocol performs synchronization between BIRD's routing
# tables and the kernel. If your kernel supports multiple routing tables
# (as Linux 2.2.x does), you can run multiple instances of the kernel
# protocol and synchronize different kernel tables with different BIRD tables.
protocol kernel {
#	learn;			# Learn all alien routes from the kernel
	persist;		# Don't remove routes on bird shutdown
	scan time 20;		# Scan kernel routing table every 20 seconds
	import all;		# Default is import all
	export all;		# Default is export none
#	kernel table 5;		# Kernel table to synchronize with (default: main)
}

# This pseudo-protocol watches all interface up/down events.
protocol device {
	scan time 10;		# Scan interfaces every 10 seconds
}

# Static routes (again, there can be multiple instances, so that you
# can disable/enable various groups of static routes on the fly).
protocol static {
#	disabled;		# Disable by default
#	table testable;		# Connect to a non-default table
#	preference 1000;	# Default preference of routes
#	debug { states, routes, filters, interfaces, events, packets };
#	debug all;
#	route 0.0.0.0/0 via 198.51.100.13;
#	route 198.51.100.0/25 unreachable;
#	route 10.0.0.0/8 unreachable;
#	route 10.1.1.0:255.255.255.0 via 198.51.100.3;
#	route 10.1.2.0:255.255.255.0 via 198.51.100.3;
#	route 10.1.3.0:255.255.255.0 via 198.51.100.4;
#	route 10.2.0.0/24 via "arc0";
    route 172.17.0.0/26 via 172.17.0.1;
}

protocol bgp {
    local as 65000;
    import all;
    neighbor 172.17.0.2 as 65000;
}


# include all configuration files from /etc/bird.d
include "/etc/bird.d/*.conf";