A small class to interface with the NFC reader Module MFRC522 on the Raspberry Pi.
This is a Python port of the example code for the NFC module MF522-AN.
##Requirements This code requires you to have SPI-Py installed from the following repository: https://github.com/lthiery/SPI-Py
##Examples This repository includes a couple of examples showing how to read, write, and dump data from a chip. They are thoroughly commented, and should be easy to understand.
You can use this image for reference.
| Name | Pin # | Pin name |
|---|---|---|
| SDA | 24 | GPIO8 |
| SCK | 23 | GPIO11 |
| MOSI | 19 | GPIO10 |
| MISO | 21 | GPIO9 |
| IRQ | None | None |
| GND | Any | Any Ground |
| RST | 22 | GPIO25 |
| 3.3V | 1 | 3V3 |
##Usage Import the class by importing MFRC522 in the top of your script. For more info see the examples.