Almost there, no RTSP (closed)

[wildBill83]

I have the CW007-199 hardware version M7C_AK_V10_1245 running firmware ppstrong-a2-tuya2_geeni-2.7.12.20220621 MD5 745a93ff16b90d37522475845a1e4d27 and everything seems good. I followed the guide and used the ppsapp patch for RTSP, but I can't seem to get an image after logging into http://user:password@ip:8080/cgi-bin/snap.cgi or VLC. I've attached the contents of my SDCARD without SDT folder for review. The end goal is to use this camera on a Frigate NVR setup. I can confirm busybox is working correctly via telnet and the hack installed via http response from http://admin:056565099@ip/proc/self/root/mnt/mmc01/hack saying "done".

Thanks for all of the hard work!

[wildBill83]

netstat doesn't show it listening on the correct ports 8554, did I apply the patch wrong using the website?

[wildBill83]

after discovering the mpeg.cgi and snap.cgi file locations and adding the address there I have images on the web interface for both snap and mpeg links. I could not locate play.cgi request address to change.

This doesn't get me RTSP, I know... but it is showing that the camera is functioning.

[wildBill83]

Is it because there is not a tuya_config.json? If that's the problem, how do I resolve it?

[wildBill83]

Removed my SDcard zip. Turns out I needed to reset the camera again and use the sync in the tuya app and then it unlocked the RTSP after generating the config.json.