diff --git a/source/_integrations/actron_air.markdown b/source/_integrations/actron_air.markdown
index 5c0828ac399a..4a8d1ead7023 100644
--- a/source/_integrations/actron_air.markdown
+++ b/source/_integrations/actron_air.markdown
@@ -12,6 +12,7 @@ ha_codeowners:
 ha_domain: actron_air
 ha_platforms:
   - climate
+  - switch
 ha_integration_type: integration
 ha_quality_scale: bronze
 ha_dhcp: true
@@ -37,6 +38,10 @@ The integration will create a climate entity for the main air conditioning syste
 
 Each zone will be reflected as a separate climate entity. You can set the temperature and operation mode per zone (if supported by your air conditioner).
 
+### Switch
+
+The integration will add the **Away mode**, **Continuous fan**, **Quiet mode**, and **Turbo mode** (if supported) switches to your Actron Air air conditioner.
+
 ## Removing the integration
 
 This integration follows standard integration removal.
diff --git a/source/_integrations/catgenie.markdown b/source/_integrations/catgenie.markdown
new file mode 100644
index 000000000000..1403d1a49f41
--- /dev/null
+++ b/source/_integrations/catgenie.markdown
@@ -0,0 +1,83 @@
+---
+title: CatGenie
+description: Instructions on how to integrate the CatGenie cat toilet into Home Assistant.
+ha_category:
+  - Sensor
+ha_release: 2026.6
+ha_iot_class: Cloud Polling
+ha_config_flow: true
+ha_codeowners:
+  - '@kclif9'
+ha_domain: catgenie
+ha_platforms:
+  - sensor
+ha_integration_type: integration
+ha_quality_scale: silver
+related:
+  - url: https://www.catgenie.com/
+    title: CatGenie
+---
+
+The **CatGenie** {% term integration %} is used to integrate with the devices of [CatGenie](https://www.catgenie.com/). CatGenie creates automatic cat toilets.
+Use case: You can automatically trigger an exhaust fan when the CatGenie is running to remove any lingering odour.
+
+## Supported devices
+
+The following devices are known to be supported by the integration:
+
+- CatGenie A.I.
+- CatGenie Whoosh
+
+## Unsupported devices
+
+The following devices are not supported by the integration:
+
+- CatGenie 120
+- Appliances that do not support the CatGenie App
+
+## Prerequisites
+
+1. Your device must support the CatGenie App
+2. Your device must be setup in the CatGenie App prior to setting up this integration
+
+{% include integrations/config_flow.md %}
+
+## Supported functionality
+
+The **My integration** integration provides the following entities.
+
+### Sensor
+
+- **Clean progress**
+  - **Description**: Provides the percentage through the current clean cycle.
+  - **Available for machines**: all
+
+- **Last clean**
+  - **Description**: Advises when the last clean was performed.
+  - **Available for machines**: all
+
+- **Sani solution**
+  - **Description**: Provides the number of remaining clean cycles in the Sani Solution cartridge.
+  - **Available for machines**: all
+
+- **Status**
+  - **Description**: Provides the current status of the unit.
+  - **Available for machines**: all
+
+- **Total cycles**
+  - **Description**: Provides the total number of clean cycles the unit has completed.
+  - **Available for machines**: all
+
+## Examples
+
+You can utilise this integration to:
+
+### Turn on an exhaust fan when the unit is running
+
+You can automatically set a fan to run when the sensor 'status' is in the 'cleaning' mode, and turn off when the status is in the 'idle' mode.
+
+## Removing the integration
+
+This integration follows standard integration removal.
+
+{% include integrations/remove_device_service.md %}
\ No newline at end of file