Help Troubleshooting Multi Screen issues

[Jordanmallison]

Edit 8/8
@ak66666 pointed out I had my outputs swapped. and that fixed the issue.
/Edit

I know that the multi screen support for windows is currently a work around but I can not seem to get it to work at all.

My current set up is as below

[OutputA] [OutputB S1] [OutputB S2]

FW is .70

OutputB S1 is set as primary, and I have both set to windows in the config with A set to 1 screen and B set to two. Below is a screenshot

Switching between A and B works fine but for B I am trapped on my primary screen until I enter game mode.

Troubleshooting steps I have taken so far are:

1. Swapped output slots
2. Have all monitors in a row
3. Parking my mouse on OutputB S1 and entering RIGHT SHIFT + BACKSPACE + 2 and then RIGHT SHIFT + BACKSPACE + 8
4. Reflashes firmware

right now I am just using the system in game mode then swapping with ctrl + caplock. this is a very livable situation but if anyone could provide some solutions I would appreciate it

[ak66666]

I'd try to set screen count on both sides to 3 (or 2), it should not hurt.

Also I wonder if the sides are confused.
I.e. you say monitors are lined up as A B1 B2, but in the config page side A on the right with screen count of 1.

[Jordanmallison]

Wow. That was my issue, I somehow got the outputs turned around. It's always something silly.

[ak66666]

Yeah, I found that the number of screens in the config should be not less than the actual displays attached. So I just set 3 for both sides, and it works with two or one.

[craser]

I'm in the same boat, though my setup is 2 Macs, with the screens like: [OutputA S1] [OutputA S2] [OutputB].

I found that trying to use the config HTML was ineffective (no clue why - I'll check on that later), so I decided to just update user_config.h & rebuild, and that's working nicely for me.

You can see what I changed here: craser@a0113b6