Starting up fails

[CallMeAreks]

The addon fails to start on Home Assistant 0.106.5

Error loading shared library librtlsdr.so.0: No such file or directory (needed by /usr/local/bin/rtl_433)
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_device_count: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_reset_buffer: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_tuner_gains: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_device_usb_strings: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_set_tuner_gain_mode: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_close: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_device_name: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_set_tuner_gain: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_sample_rate: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_read_async: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_set_center_freq: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_open: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_set_sample_rate: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_center_freq: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_get_index_by_serial: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_cancel_async: symbol not found
Error relocating /usr/local/bin/rtl_433: rtlsdr_set_freq_correction: symbol not found
[cmd] /bin/ash exited 127

Any ideas what could've happened?

[mraaman]

As a workaround, until the image is fixed, you can put

export LD_LIBRARY_PATH=/usr/local/lib64

in your rtl2mqtt.sh

[CallMeAreks]

That worked, thank you so much!

[dancwilliams]

w00t! Thanks @mraaman!

[mmiller7]

Just a note, this is not a HomeAssistant issue but rather a RTL_433 update/change. Also be aware the new RTL_433 application publishes sensors under "new" names.

See also: #38