-
Notifications
You must be signed in to change notification settings - Fork 66
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Configuring LoRaWAN demo for use with TTN #38
Comments
@woobagooba It tries to read the mac address of the network card, but apparently fails. Quick workaround:
Yes, EU868. You can optionally override the channel plan here, then remove libmbed.bc and recompile. But I'd advise to keep it at EU868 for now. |
OK will try the code mod to set the GW ID. It would be helpful to have an env var override similar to HOST and PORT. |
@woobagooba I agree. PR is welcome ;-) |
Unlikely we will be able to dig that far into the code base. We are identifying the Windows specific bugs, working to provide you accurate install instructions, and also working on Docker-izing this. Appreciated if you could address this GW ID bug or provide the env var override. |
Questions ...
I have a simulator reporting GW ID of 00:00:00. This is odd in that it is all zeros, is only 3 octets long (your video demos display an 8 octet GW ID), and appears not to be based on any of the platform MAC addresses.
A GW must be registered with TTN and that GW's EUI must be set to the LoRaWAN simulator reported Gateway ID, correct? If yes, TTN will not accept a GW EUI of all zeroes.
The LoRaWAN demo appears to be hardcoded for EU 868, must the TTN gateway also be configured for EU 868?
The text was updated successfully, but these errors were encountered: