HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch)

Requirements Hardware

CPU: 2 Core
RAM: 4 GB
HDD: 20 GB

Software that will be installed

ca-certificates
ntp
vim
libapache2-mod-php, php, php7.0-mcrypt, php-dom, php-curl, php-mbstring, apache2 (>= 2.4)
openssl
cron
curl

Other Requirements

Place the SSL Credentials into the right place:
- SSL Certificate: "/etc/ssl/certs/ssl-sp.crt"
- SSL Key: "/etc/ssl/private/ssl-sp.key"
- SSL CA: "/usr/local/share/ca-certificates/ssl-ca.crt"
- Run the command: "update-ca-certificates"

Installation Instructions

Install software requirements

Become ROOT:
- sudo su -
Change the default mirror with the GARR ones:
- sed -i 's/deb.debian.org/debian.mirror.garr.it/g' /etc/apt/sources.list
- apt update && apt upgrade
Install the packages required:
- apt install ca-certificates vim openssl

Configure the environment

Modify your /etc/hosts:
- vim /etc/hosts
```
127.0.1.1 sp.example.org sp
```
(Replace sp.example.org with your SP Full Qualified Domain Name)
Be sure that your firewall doesn't block the traffic on port 443 (or you can't access to your SP)

Install SimpleSAMLphp Service Provider

Become ROOT:
- sudo su -

Install required packages SP:

apt install apache2 openssl ntp vim php php-curl php-dom php7.0-mcrypt php-mbstring curl cron --no-install-recommends

Install the SimpleSAMLphp SP:
- cd /opt/
- wget https://github.com/simplesamlphp/simplesamlphp/releases/download/v1.16.3/simplesamlphp-1.16.3.tar.gz
- tar xzf simplesamlphp-1.16.3.tar.gz
- mv simplesamlphp-1.16.3 simplesamlphp

Configuration Instructions

Configure SSL on Apache2

Complete the file /etc/apache2/sites-available/default-ssl.conf as follows:

<IfModule mod_ssl.c>
   SSLStaplingCache        shmcb:/var/run/ocsp(128000)
   <VirtualHost _default_:443>
     ServerName sp.example.org:443
     ServerAdmin admin@example.org
     DocumentRoot /var/www/html
     
     # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
     # error, crit, alert, emerg.
     # It is also possible to configure the loglevel for particular
     # modules, e.g.
 
     #LogLevel info ssl:warn
     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined
     
     SSLEngine On
     
     SSLProtocol All -SSLv2 -SSLv3 -TLSv1 -TLSv1.1
     SSLCipherSuite "EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH"

     SSLHonorCipherOrder on

     # Disable SSL Compression
     SSLCompression Off
     
     # OCSP Stapling, only in httpd/apache >= 2.3.3
     SSLUseStapling          on
     SSLStaplingResponderTimeout 5
     SSLStaplingReturnResponderErrors off
     
     # Enable HTTP Strict Transport Security with a 2 year duration
     Header always set Strict-Transport-Security "max-age=63072000;includeSubDomains;preload"
     
     SSLCertificateFile /etc/ssl/certs/ssl-sp.crt
     SSLCertificateKeyFile /etc/ssl/private/ssl-sp.key
 
     SSLCertificateChainFile /etc/ssl/certs/ssl-ca.pem
     
   </VirtualHost>
</IfModule>

Enable proxy_http, SSL and headers Apache2 modules:
- a2enmod ssl headers alias include negotiation
- a2ensite default-ssl.conf
- systemctl restart apache2

Configure Apache2 to open port 80 only for localhost:

vim /etc/apache2/ports.conf

# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf

Listen 127.0.0.1:80

<IfModule ssl_module>
  Listen 443
</IfModule>

<IfModule mod_gnutls.c>
  Listen 443
</IfModule>

Configure Apache2 to redirect all on HTTPS:

vim /etc/apache2/sites-enabled/000-default.conf

<VirtualHost *:80>
   ServerName "sp.example.org"
   Redirect permanent "/" "https://sp.example.org/"
   RedirectMatch permanent ^/(.*)$ https://sp.example.org/$1
</VirtualHost>

Verify the strength of your SP's machine on:
- https://www.ssllabs.com/ssltest/analyze.html

Configure SimpleSAMLphp SP

Become ROOT:
- sudo su -

Create the Apache2 configuration for the application:

vim /etc/apache2/conf-available/simplesaml.conf

Alias /simplesaml /opt/simplesamlphp/www

RedirectMatch    ^/$  /simplesaml

<Location /simplesaml>
  Require all granted
</Location>

Enable the simplesaml Apache2 configuration:
- a2enconf simplesaml.conf
- systemctl reload apache2.service
Change the permission for SimpleSAMLphp logs:
- chown www-data /opt/simplesamlphp/log
Configure the SimpleSAMLphp SP:
- Generate some useful opaque strings:
  - User Admin Password (auth.adminpassword): php /opt/simplesamlphp/bin/pwgen.php
  - Secret Salt (secretsalt): tr -c -d '0123456789abcdefghijklmnopqrstuvwxyz' </dev/urandom | dd bs=32 count=1 2>/dev/null ; echo
  - Cron Key (key): tr -c -d '0123456789abcdefghijklmnopqrstuvwxyz' </dev/urandom | dd bs=32 count=1 2>/dev/null ; echo
- Change SimpleSAMLphp configuration: vim /opt/simplesamlphp/config/config.php
```
...
'technicalcontact_name' => 'Technical Contact',
'technicalcontact_email' => 'service.support@example.com',
...
'secretsalt' => '#_YOUR_SECRET_SALT_HERE_#',
...
'auth.adminpassword' => '#_YOUR_USER_ADMIN_PASSWORD_#',
...
'admin.protectindexpage' => true,
...
'logging.handler' => 'file',
```
Generate SAML Credentials:
- Move on the SAML credentials directory: cd /opt/simplesamlphp/cert
- Follow Appendix A: Sample SAML2 Metadata embedded certificate and generate the right SAML Credentials.

Configure automatic download of Federation Metadata:

Enable CRON module:

cd /opt/simplesamlphp/

touch modules/cron/enable

cp modules/cron/config-templates/module_cron.php config/

Enable METAREFRESH module:

cd /opt/simplesamlphp/

touch modules/metarefresh/enable

cp modules/metarefresh/config-templates/config-metarefresh.php config/

Test if it works:

cd /opt/simplesamlphp/modules/metarefresh/bin

./metarefresh.php -s http://md.idem.garr.it/metadata/idem-test-metadata-sha256.xml > metarefresh-test.txt

Change the CRON configuration file:

vim /opt/simplesamlphp/config/module_cron.php

<?php
/*
 * Configuration for the Cron module.
 */

$config = array (

        'key' => '#_YOUR_CRON_KEY_#',
        'allowed_tags' => array('daily', 'hourly', 'frequent'),
        'debug_message' => TRUE,
        'sendemail' => TRUE,

);
?>

Insert the following Cron job to the crontab file (crontab -e):

# Run cron: [hourly]
01 * * * *  root  curl --silent "https://sp.example.org/simplesaml/module.php/cron/cron.php?key=<SECRET>&tag=hourly" > /dev/null 2>&1

Configure METAREFRESH:

vim /opt/simplesamlphp/config/config-metarefresh.php

<?php

$config = array(

   /*
    * Global blacklist: entityIDs that should be excluded from ALL sets.
   */
   #'blacklist' = array(
   #       'http://my.own.uni/idp'
   #),

   /*
    * Conditional GET requests
    * Efficient downloading so polling can be done more frequently.
    * Works for sources that send 'Last-Modified' or 'Etag' headers.
    * Note that the 'data' directory needs to be writable for this to work.
    */
   #'conditionalGET'       => TRUE,

   'sets' => array(

      'idem' => array(
         'cron'    => array('hourly'),
         'sources' => array(
                         array(
                            /*
                             * entityIDs that should be excluded from this src.
                             */
                            #'blacklist' => array(
                            #       'http://some.other.uni/idp',
                            #),

                            /*
                             * Whitelist: only keep these EntityIDs.
                             */
                            #'whitelist' => array(
                            #       'http://some.uni/idp',
                            #       'http://some.other.uni/idp',
                            #),

                            #'conditionalGET' => TRUE,
                            'src' => 'http://md.idem.garr.it/metadata/idem-test-metadata-sha256.xml',
                            'certificates' => array(
                               '/opt/simplesamlphp/cert/federation-cert.pem',
                            ),
                            'template' => array(
                               'tags'  => array('idem'),
                               'authproc' => array(
                                  51 => array('class' => 'core:AttributeMap', 'oid2name'),
                               ),
                            ),

                            /*
                             * The sets of entities to load, any combination of:
                             *  - 'saml20-idp-remote'
                             *  - 'saml20-sp-remote'
                             *  - 'shib13-idp-remote'
                             *  - 'shib13-sp-remote'
                             *  - 'attributeauthority-remote'
                             *
                             * All of them will be used by default.
                             *
                             * This option takes precedence over the same option per metadata set.
                             */
                           //'types' => array(),
                         ),
                      ),
         'expireAfter' => 60*60*24*10, // Maximum 10 days cache time
         'outputDir'   => 'metadata/idem-federation/',

         /*
          * Which output format the metadata should be saved as.
          * Can be 'flatfile' or 'serialize'. 'flatfile' is the default.
         */
         'outputFormat' => 'flatfile',


         /*
          * The sets of entities to load, any combination of:
          *  - 'saml20-idp-remote'
          *  - 'saml20-sp-remote'
          *  - 'shib13-idp-remote'
          *  - 'shib13-sp-remote'
          *  - 'attributeauthority-remote'
          *
          * All of them will be used by default.
         */
         //'types' => array(),
      ),
   ),
);

mkdir /opt/simplesamlphp/metadata/idem-federation ; chown www-data /opt/simplesamlphp/metadata/idem-federation

Change the SimpleSAMLphp configuration file:

vim /opt/simplesamlphp/config/config.php

...
'metadata.sources' => array(
   array('type' => 'flatfile'),
   array(
      'type' => 'flatfile', 
      'directory' => 'metadata/idem-federation'
   ),
),

Remove/Rename all PHP files under:

cd /opt/simplesamlphp/metadata ; rm *.php

adfs-idp-hosted.php
adfs-sp-remote.php
saml20-idp-hosted.php
saml20-idp-remote.php
saml20-sp-remote.php
shib13-idp-hosted.php
shib13-idp-remote.php
shib13-sp-hosted.php
shib13-sp-remote.php
wsfed-idp-remote.php
wsfed-sp-hosted.php

Download the Federation signing certificate:

wget https://md.idem.garr.it/certs/idem-signer-20220121.pem -O /opt/simplesamlphp/cert/federation-cert.pem
Check the validity:
- cd /opt/simplesamlphp/cert/
- openssl x509 -in federation-cert.pem -fingerprint -sha1 -noout
  
  (sha1: D1:68:6C:32:A4:E3:D4:FE:47:17:58:E7:15:FC:77:A8:44:D8:40:4D)
- openssl x509 -in federation-cert.pem -fingerprint -md5 -noout
  
  (md5: 48:3B:EE:27:0C:88:5D:A3:E7:0B:7C:74:9D:24:24:E0)
Go to 'https://sp.example.org/simplesaml/module.php/core/frontpage_federation.php' and forcing download of the Federation metadata by pressing on Metarefresh: fetch metadata or wait 1 day

Set PHP 'memory_limit' to '1024M' or more to allow the download of huge metadata files (like eduGAIN):
- vim /etc/php/7.0/apache2/php.ini
```
memory_limit = 1024M
```

Choose and modify your authsources:

vim /opt/simplesamlphp/config/authsources.php

<?php

$config = array(

    // This is a authentication source which handles admin authentication.
    'admin' => array(
        // The default is to use core:AdminPassword, but it can be replaced with
        // any authentication source.

        'core:AdminPassword',
    ),


    // An authentication source which can authenticate against both SAML 2.0
    // and Shibboleth 1.3 IdPs.
    'default-sp' => array(
        'saml:SP',
    
    'privatekey' => 'ssp-sp.key',
    'certificate' => 'ssp-sp.crt',

        // The entity ID of this SP.
        // Can be NULL/unset, in which case an entity ID is generated based on the metadata URL.
        'entityID' => null,

        // The entity ID of the IdP this should SP should contact.
        // Can be NULL/unset, in which case the user will be shown a list of available IdPs.
        'idp' => null,

        // The URL to the discovery service.
        // Can be NULL/unset, in which case a builtin discovery service will be used.
        'discoURL' => null,

        /*
         * The attributes parameter must contain an array of desired attributes by the SP.
         * The attributes can be expressed as an array of names or as an associative array
         * in the form of 'friendlyName' => 'name'. This feature requires 'name' to be set.
         * The metadata will then be created as follows:
         * <md:RequestedAttribute FriendlyName="friendlyName" Name="name" />
         */
        'name' => array(
           'en' => 'IDEM Test SP ENG',
           'it' => 'IDEM Test SP ITA',
        ),

        'attributes' => array(
           'eduPersonPrincipalName' => 'urn:oid:1.3.6.1.4.1.5923.1.1.1.6',
           'mail' => 'urn:oid:0.9.2342.19200300.100.1.3',
           'cn' => 'urn:oid:2.5.4.3',
        ),

        'attributes.required' => array (
           'urn:oid:0.9.2342.19200300.100.1.3',
        ),
    
        'attributes.NameFormat' => 'urn:oasis:names:tc:SAML:2.0:attrname-format:uri',

        'description' => array(
           'en' => 'Service Description',
           'it' => 'Descrizione del Servizio offerto',
        ),

        'OrganizationName' => array(
          'en' => 'Your Organization Name',
          'it' => 'Il nome della tua organizzazione',
        ),

        'OrganizationDisplayName' => array(
          'en' => 'Your Organization Display Name',
          'it' => 'Il Display Name della tua Organizzazione',
        ),

        'OrganizationURL' => array(
          'en' => 'https://www.your.organization.it/en',
          'it' => 'https://www.your.organization.it/it',
        ),

        'UIInfo' => array(
           'DisplayName' => array(
              'en' => 'English SP Display Name',
              'it' => 'SP Display Name in Italiano',
           ),
           'Description' => array(
              'en' => 'Service Description',
              'it' => 'Descrizione del Servizio offerto',
           ),
           'PrivacyStatementURL' => array(
              'en' => 'https://www.your.organization.it/en/privacy',
              'it' => 'https://www.your.organization.it/it/privacy',
           ),
           'Logo' => array(
              array(
                'url'    => 'https://www.your.organization.it/en/logo80x60.png',
                'height' => 60,
                'width'  => 80,
              ),
              array(
                'url'    => 'https://www.your.organization.it/logo16x16.png',
                'height' => 16,
                'width'  => 16,
              ),
           ),
        ),
    ),
);

OPTIONAL: Enable UTF-8 for SP metadata:

vim /opt/simplesamlphp/vendor/simplesamlphp/saml2/src/SAML2/DOMDocumentFactory.php

...
   public static function create()
   {
     return new \DOMDocument('1.0','utf-8');
   }
}

Now you are able to reach your Shibboleth SP Metadata on:

https://sp.example.org/simplesaml/module.php/saml/sp/metadata.php/default-sp

(change sp.example.org to you SP full qualified domain name)

Register you SP on IDEM Entity Registry (your entity have to be approved by an IDEM Federation Operator before become part of IDEM Test Federation):

Go to https://registry.idem.garr.it/ and follow "Insert a New Service Provider into the IDEM Test Federation"

Configure an example federated resouce "secure"

Create the "secure" application into the DocumentRoot:

mkdir /var/www/html/secure

vim /var/www/html/secure/index.php

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
   <head>
      <title>SSP-SP Example Page</title>
   </head>

   <body>
     <p>This is an Example Page that show the behaviour of a SimpleSAMLphp Service Provider</p>
     <p>These are attributes released from the IdP to this <strong>secure</strong> application:</p>
<?php
   require_once('/opt/simplesamlphp/lib/_autoload.php');

   $as = new \SimpleSAML\Auth\Simple('default-sp');
   $as->requireAuth();
   $attributes = $as->getAttributes();

   echo "<ul>";
   foreach ($attributes as $name => $values) {
      echo "<li><strong>$name:</strong>\n";
      foreach ($values as $value) {
         echo "\t$value\n";
      }
      echo "</li>";
      echo "<br\>";
   }
?>
   </body>
</html>

Authors

Original Author

Marco Malavolti (marco.malavolti@garr.it)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch).md

HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch).md

HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch)

Table of Contents

Requirements Hardware

Software that will be installed

Other Requirements

Installation Instructions

Install software requirements

Configure the environment

Install SimpleSAMLphp Service Provider

Configuration Instructions

Configure SSL on Apache2

Configure SimpleSAMLphp SP

Configure an example federated resouce "secure"

Authors

Original Author

Files

HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch).md

Latest commit

History

HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch).md

File metadata and controls

HOWTO Install and Configure a SimpleSAMLphp SP v1.x on Debian Linux 9 (Stretch)

Table of Contents

Requirements Hardware

Software that will be installed

Other Requirements

Installation Instructions

Install software requirements

Configure the environment

Install SimpleSAMLphp Service Provider

Configuration Instructions

Configure SSL on Apache2

Configure SimpleSAMLphp SP

Configure an example federated resouce "secure"

Authors

Original Author