Skip to content

Latest commit

 

History

History
 
 

docker-orchestration

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 

Docker Orchestration

Hi, welcome to the Orchestration lab for DockerCon 2017!

In this lab you will play around with the container orchestration features of Docker. You will deploy a simple application to a single host and learn how that works. Then, you will configure Docker Swarm Mode, and learn to deploy the same simple application across multiple hosts. You will then see how to scale the application and move the workload across different hosts easily.

Difficulty: Beginner

Time: Approximately 30 minutes

Tasks:

Document conventions

When you encounter a phrase in between < and > you are meant to substitute in a different value.

For instance if you see ssh <username>@<hostname> you would actually type something like ssh ubuntu@node0-a.ivaf2i2atqouppoxund0tvddsa.jx.internal.cloudapp.net

You will be asked to SSH into various nodes. These nodes are referred to as node0-a, node1-b, node2-c, etc.

Prerequisites

This lab requires three Linux nodes with Docker 17.03 (or higher) installed.

Also, please make sure you can SSH into the Linux nodes. If you haven't already done so, please SSH in to node0-a, node1-b, and node2-c.

You can do that by SSHing into node0-a.

$ ssh ubuntu@<node0-a IP address>

Then, node1-b.

$ ssh ubuntu@<node1-b IP address>

And, finally node2-c.

$ ssh ubuntu@<node2-с IP address>

Section 1: What is Orchestration

So, what is Orchestration anyways? Well, Orchestration is probably best described using an example. Lets say that you have an application that has high traffic along with high-availability requirements. Due to these requirements, you typically want to deploy across at least 3+ machines, so that in the event a host fails, your application will still be accessible from at least two others. Obviously, this is just an example and your use-case will likely have its own requirements, but you get the idea.

Deploying your application without Orchestration is typically very time consuming and error prone, because you would have to manually SSH into each machine, start up your application, and then continually keep tabs on things to make sure it is running as you expect.

But, with Orchestration tooling, you can typically off-load much of this manual work and let automation do the heavy lifting. One cool feature of Orchestration with Docker Swarm, is that you can deploy an application across many hosts with only a single command (once Swarm mode is enabled). Plus, if one of the supporting nodes dies in your Docker Swarm, other nodes will automatically pick up load, and your application will continue to hum along as usual.

If you are typically only using docker run to deploy your applications, then you could likely really benefit from using Docker Compose, Docker Swarm mode, and both Docker Compose and Swarm.

Section 2: Configure Swarm Mode

Real-world applications are typically deployed across multiple hosts as discussed earlier. This improves application performance and availability, as well as allowing individual application components to scale independently. Docker has powerful native tools to help you do this.

An example of running things manually and on a single host would be to create a new container on node0-a by running docker run -dt ubuntu sleep infinity.

$ docker run -dt ubuntu sleep infinity
Unable to find image 'ubuntu:latest' locally
latest: Pulling from library/ubuntu
d54efb8db41d: Pull complete
f8b845f45a87: Pull complete
e8db7bf7c39f: Pull complete
9654c40e9079: Pull complete
6d9ef359eaaa: Pull complete
Digest: sha256:dd7808d8792c9841d0b460122f1acf0a2dd1f56404f8d1e56298048885e45535
Status: Downloaded newer image for ubuntu:latest
846af8479944d406843c90a39cba68373c619d1feaa932719260a5f5afddbf71

This command will create a new container based on the ubuntu:latest image and will run the sleep command to keep the container running in the background. You can verify our example container is up by running docker ps on node0-a.

$ docker ps
CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
044bea1c2277        ubuntu              "sleep infinity"    2 seconds ago       Up 1 second                             distracted_mayer

But, this is only on a single node. What happens if this node goes down? Well, our application just dies and it is never restarted. To restore service, we would have to manually log into this machine, and start tweaking things to get it back up and running. So, it would be helpful if we had some type of system that would allow us to run this "sleep" application/service across many machines.

In this section you will configure Swarm Mode. This is a new optional mode in which multiple Docker hosts form into a self-orchestrating group of engines called a swarm. Swarm mode enables new features such as services and bundles that help you deploy and manage multi-container apps across multiple Docker hosts.

You will complete the following:

  • Configure Swarm mode
  • Run the app
  • Scale the app
  • Drain nodes for maintenance and reschedule containers

For the remainder of this lab we will refer to Docker native clustering as Swarm mode. The collection of Docker engines configured for Swarm mode will be referred to as the swarm.

A swarm comprises one or more Manager Nodes and one or more Worker Nodes. The manager nodes maintain the state of swarm and schedule application containers. The worker nodes run the application containers. As of Docker 1.12, no external backend, or 3rd party components, are required for a fully functioning swarm - everything is built-in!

In this part of the demo you will use all three of the nodes in your lab. node0-a will be the Swarm manager, while node1-b and node2-c will be worker nodes. Swarm mode supports a highly available redundant manager nodes, but for the purposes of this lab you will only deploy a single manager node.

Step 2.1 - Create a Manager node

If you haven't already done so, please SSH in to node0-a.

$ ssh ubuntu@<node0-a IP address>

In this step you'll initialize a new Swarm, join a single worker node, and verify the operations worked.

Run docker swarm init on node0-a.

$ docker swarm init
Swarm initialized: current node (6dlewb50pj2y66q4zi3egnwbi) is now a manager.

To add a worker to this swarm, run the following command:

    docker swarm join \
    --token SWMTKN-1-1wxyoueqgpcrc4xk2t3ec7n1poy75g4kowmwz64p7ulqx611ih-68pazn0mj8p4p4lnuf4ctp8xy \
    10.0.0.5:2377

To add a manager to this swarm, run 'docker swarm join-token manager' and follow the instructions.

You can run the docker info command to verify that node0-a was successfully configured as a swarm manager node.

$ docker info
Containers: 2
 Running: 0
 Paused: 0
 Stopped: 2
Images: 2
Server Version: 17.03.1-ee-3
Storage Driver: aufs
 Root Dir: /var/lib/docker/aufs
 Backing Filesystem: extfs
 Dirs: 13
 Dirperm1 Supported: true
Logging Driver: json-file
Cgroup Driver: cgroupfs
Plugins:
 Volume: local
 Network: bridge host macvlan null overlay
Swarm: active
 NodeID: rwezvezez3bg1kqg0y0f4ju22
 Is Manager: true
 ClusterID: qccn5eanox0uctyj6xtfvesy2
 Managers: 1
 Nodes: 1
 Orchestration:
  Task History Retention Limit: 5
 Raft:
  Snapshot Interval: 10000
  Number of Old Snapshots to Retain: 0
  Heartbeat Tick: 1
  Election Tick: 3
 Dispatcher:
  Heartbeat Period: 5 seconds
 CA Configuration:
  Expiry Duration: 3 months
 Node Address: 10.0.0.5
 Manager Addresses:
  10.0.0.5:2377
<Snip>

The swarm is now initialized with node0-a as the only Manager node. In the next section you will add node1-b and node2-c as Worker nodes.

Step 2.2 - Join Worker nodes to the Swarm

You will perform the following procedure on node1-b and node2-c. Towards the end of the procedure you will switch back to node0-a.

Open a new SSH session to node1-b (Keep your SSH session to node0-a open in another tab or window).

$ ssh ubuntu@<node1-b IP address>

Now, take that entire docker swarm join ... command we copied earlier from node0-a where it was displayed as terminal output. We need to paste the copied command into the terminal of node1-b and node2-c.

It should look something like this for node1-b. By the way, if the docker swarm join ... command scrolled off your screen already, you can run the docker swarm join-token worker command on the Manager node to get it again.

$ docker swarm join \
    --token SWMTKN-1-1wxyoueqgpcrc4xk2t3ec7n1poy75g4kowmwz64p7ulqx611ih-68pazn0mj8p4p4lnuf4ctp8xy \
    10.0.0.5:2377

Again, ssh into node2-c and it should look something like this.

$ ssh ubuntu@<node2-c IP address>
$ docker swarm join \
    --token SWMTKN-1-1wxyoueqgpcrc4xk2t3ec7n1poy75g4kowmwz64p7ulqx611ih-68pazn0mj8p4p4lnuf4ctp8xy \
    10.0.0.5:2377

Once you have run this on node1-b and node2-c, switch back to node0-a, and run a docker node ls to verify that both nodes are part of the Swarm. You should see three nodes, node0-a as the Manager node and node1-b and node2-c both as Worker nodes.

$ docker node ls
ID                           HOSTNAME  STATUS  AVAILABILITY  MANAGER STATUS
6dlewb50pj2y66q4zi3egnwbi *  node0-a   Ready   Active        Leader
ym6sdzrcm08s6ohqmjx9mk3dv    node2-c   Ready   Active
yu3hbegvwsdpy9esh9t2lr431    node1-b   Ready   Active

The docker node ls command shows you all of the nodes that are in the swarm as well as their roles in the swarm. The * identifies the node that you are issuing the command from.

Congratulations! You have configured a swarm with one manager node and two worker nodes.

Section 3: Deploy applications across multiple hosts

Now that you have a swarm up and running, it is time to deploy our really simple sleep application.

You will perform the following procedure from node0-a.

Step 3.1 - Deploy the application components as Docker services

Our sleep application is becoming very popular on the internet (due to hitting Reddit and HN). People just love it. So, you are going to have to scale your application to meet peak demand. You will have to do this across multiple hosts for high availability too. We will use the concept of Services to scale our application easily and manage many containers as a single entity.

Services were a new concept in Docker 1.12. They work with swarms and are intended for long-running containers.

You will perform this procedure from node0-a.

Lets deploy sleep as a Service across our Docker Swarm.

$ docker service create --name sleep-app ubuntu sleep infinity
of5rxsxsmm3asx53dqcq0o29c

Verify that the service create has been received by the Swarm manager.

$ docker service ls
ID            NAME       MODE        REPLICAS  IMAGE
of5rxsxsmm3a  sleep-app  replicated  1/1       ubuntu:latest

The state of the service may change a couple times until it is running. The image is being downloaded from Docker Store to the other engines in the Swarm. Once the image is downloaded the container goes into a running state on one of the three nodes.

At this point it may not seem that we have done anything very differently than just running a docker run .... We have again deployed a single container on a single host. The difference here is that the container has been scheduled on a swarm cluster.

Well done. You have deployed the sleep-app to your new Swarm using Docker services.

Section 4: Scale the application

Demand is crazy! Everybody loves your sleep app! It's time to scale out.

One of the great things about services is that you can scale them up and down to meet demand. In this step you'll scale the service up and then back down.

You will perform the following procedure from node0-a.

Scale the number of containers in the sleep-app service to 7 with the docker service update --replicas 7 sleep-app command. replicas is the term we use to describe identical containers providing the same service.

$ docker service update --replicas 7 sleep-app

The Swarm manager schedules so that there are 7 sleep-app containers in the cluster. These will be scheduled evenly across the Swarm members.

We are going to use the docker service ps sleep-app command. If you do this quick fast enough after using the --replicas option you can see the containers come up in real time.

$ docker service ps sleep-app
ID            NAME         IMAGE          NODE     DESIRED STATE  CURRENT STATE          ERROR  PORTS
7k0flfh2wpt1  sleep-app.1  ubuntu:latest  node0-a  Running        Running 9 minutes ago
wol6bzq7xf0v  sleep-app.2  ubuntu:latest  node2-c  Running        Running 2 minutes ago
id50tzzk1qbm  sleep-app.3  ubuntu:latest  node1-b  Running        Running 2 minutes ago
ozj2itmio16q  sleep-app.4  ubuntu:latest  node2-c  Running        Running 2 minutes ago
o4rk5aiely2o  sleep-app.5  ubuntu:latest  node1-b  Running        Running 2 minutes ago
35t0eamu0rue  sleep-app.6  ubuntu:latest  node1-b  Running        Running 2 minutes ago
44s8d59vr4a8  sleep-app.7  ubuntu:latest  node0-a  Running        Running 2 minutes ago

Notice that there are now 7 containers listed. It may take a few seconds for the new containers in the service to all show as RUNNING. The NODE column tells us on which node a container is running.

Scale the service back down just five containers again with the docker service update --replicas 4 sleep-app command.

$ docker service update --replicas 4 sleep-app

Verify that the number of containers has been reduced to 4 using the docker service ps sleep-app command.

$ docker service ps sleep-app
ID            NAME         IMAGE          NODE     DESIRED STATE  CURRENT STATE           ERROR  PORTS
7k0flfh2wpt1  sleep-app.1  ubuntu:latest  node0-a  Running        Running 13 minutes ago
wol6bzq7xf0v  sleep-app.2  ubuntu:latest  node2-c  Running        Running 5 minutes ago
35t0eamu0rue  sleep-app.6  ubuntu:latest  node1-b  Running        Running 5 minutes ago
44s8d59vr4a8  sleep-app.7  ubuntu:latest  node0-a  Running        Running 5 minutes ago

You have successfully scaled a swarm service up and down.

Section 5: Drain a node and reschedule the containers

Your sleep-app has been doing amazing after hitting Reddit and HN. It's now number 1 on the Apple Store! You have scaled up during the holidays and down during the slow season. Now you are doing maintenance on one of your servers so you will need to gracefully take a server out of the swarm without interrupting service to your customers.

Take a look at the status of your nodes again by running docker node ls on node0-a.

$ docker node ls
ID                           HOSTNAME  STATUS  AVAILABILITY  MANAGER STATUS
6dlewb50pj2y66q4zi3egnwbi *  node0-a   Ready   Active        Leader
ym6sdzrcm08s6ohqmjx9mk3dv    node2-c   Ready   Active
yu3hbegvwsdpy9esh9t2lr431    node1-b   Ready   Active

You will be taking node1-b out of service for maintenance.

If you haven't already done so, please SSH in to node1-b.

$ ssh ubuntu@<node1-b IP address>

Then lets see the containers that you have running there.

$ docker ps
CONTAINER ID        IMAGE                                                                            COMMAND             CREATED             STATUS              PORTS               NAMES
4e7ea1154ea4        ubuntu@sha256:dd7808d8792c9841d0b460122f1acf0a2dd1f56404f8d1e56298048885e45535   "sleep infinity"    9 minutes ago       Up 9 minutes                            sleep-app.6.35t0eamu0rueeozz0pj2xaesi

You can see that we have one of the slepp-app containers running here (your output might look different though).

Now lets jump back to node0-a (the Swarm manager) and take node1-b out of service. To do that, lets run docker node ls again.

$ docker node ls
ID                           HOSTNAME  STATUS  AVAILABILITY  MANAGER STATUS
6dlewb50pj2y66q4zi3egnwbi *  node0-a   Ready   Active        Leader
ym6sdzrcm08s6ohqmjx9mk3dv    node2-c   Ready   Active
yu3hbegvwsdpy9esh9t2lr431    node1-b   Ready   Active

We are going to take the ID for node1-b and run docker node update --availability drain yu3hbegvwsdpy9esh9t2lr431. We are using the node1-b host ID as input into our drain command.

$ docker node update --availability drain yu3hbegvwsdpy9esh9t2lr431

Check the status of the nodes

$ docker node ls
ID                           HOSTNAME  STATUS  AVAILABILITY  MANAGER STATUS
6dlewb50pj2y66q4zi3egnwbi *  node0-a   Ready   Active        Leader
ym6sdzrcm08s6ohqmjx9mk3dv    node2-c   Ready   Active
yu3hbegvwsdpy9esh9t2lr431    node1-b   Ready   Drain

Node node1-b is now in the Drain state.

Switch back to node1-b and see what is running there by running docker ps.

$ docker ps
CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES

node1-b does not have any containers running on it.

Lastly, check the service again on node0-a to make sure that the container were rescheduled. You should see all four containers running on the remaining two nodes.

$ docker service ps sleep-app
ID            NAME             IMAGE          NODE     DESIRED STATE  CURRENT STATE           ERROR  PORTS
7k0flfh2wpt1  sleep-app.1      ubuntu:latest  node0-a  Running        Running 25 minutes ago
wol6bzq7xf0v  sleep-app.2      ubuntu:latest  node2-c  Running        Running 18 minutes ago
s3548wki7rlk  sleep-app.6      ubuntu:latest  node2-c  Running        Running 3 minutes ago
35t0eamu0rue   \_ sleep-app.6  ubuntu:latest  node1-b  Shutdown       Shutdown 3 minutes ago
44s8d59vr4a8  sleep-app.7      ubuntu:latest  node0-a  Running        Running 18 minutes ago

Cleaning Up

Execute the docker service rm sleep-app command on node0-a to remove the service called myservice.

$ docker service rm sleep-app

Execute the docker ps command on node0-a to get a list of running containers.

$ docker ps
CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
044bea1c2277        ubuntu              "sleep infinity"    17 minutes ago      17 minutes ag                           distracted_mayer

You can use the docker kill <CONTAINER ID> command on node0-a to kill the sleep container we started at the beginning.

$ docker kill 044bea1c2277

Finally, lets remove node0-a, node1-b, and node2-c from the Swarm. We can use the docker swarm leave --force command to do that.

Lets run docker swarm leave --force on node0-a.

$ docker swarm leave --force

Then, run docker swarm leave --force on node1-b.

$ docker swarm leave --force

Finally, run docker swarm leave --force on node2-c.

$ docker swarm leave --force

Congratulations! You've completed this lab. You now know how to build a swarm, deploy applications as collections of services, and scale individual services up and down.