12-phc2sys

#!/bin/bash

. test.common

test_start "phc2sys"

nodes=1
master_nodes="0"
phc2sys_node=1
phc2sys_conf="-O 0 -s /dev/ptp0"

run_test || test_fail
check_sync || test_fail

time_max_limit=1e-8
phc2sys_conf="-O 0 -d /dev/pps0"

run_test || test_fail
check_sync || test_fail

phc2sys_conf="-O 0 -s /dev/ptp0 -d /dev/pps0"

run_test || test_fail
check_sync || test_fail

nodes=3
subnets="1 2 3 | 1 2 3"
master_nodes="1"
master_conf="utc_offset 30"
refclock_offset="-30"
phc2sys_node=3
phc2sys_uds="2:1"
phc2sys_phc_base=2
phc2sys_phc_swap=1
time_max_limit=$default_time_max_limit

phc2sys_conf="-w -s eth0"

run_test || test_fail
check_sync || test_fail

phc2sys_conf="-a -r"
# network down at 150-250 in subnet 1 and 100-200 in subnet 2
base_delay=$(cat <<-EOF | tr -d '\n'
  (+ $default_base_delay
    (* -1
      (equal 0.6 subnet 1.5)
      (equal 0.1 (min (+ time (* subnet 50) -100) 100) 100)
      (equal 0.1 (max (+ time (* subnet 50) -100) 200) 200)))
EOF
)
# step at 170th second
slave_step="(* $time_offset (equal 0.1 (sum 1.0) 170))"
min_sync_time=215
max_sync_time=240

run_test || test_fail
check_sync || test_fail

nodes=4
subnets="1 2 4 | 1 3 4"
phc2sys_node=4
phc2sys_phc_base=3
phc2sys_uds="3:1 2:1"
max_sync_time=290

run_test || test_fail
check_sync || test_fail

check_any_log_message 4 "\[[12].\..*select.*out-of-domain" "eth1" || test_fail
check_any_log_message 4 "\[10.\..*select.*out-of-domain" "eth0" || test_fail
check_any_log_message 4 "\[20.\..*select.*out-of-domain" "eth1" || test_fail
check_any_log_message 4 "\[25.\..*select.*out-of-domain" "eth1" || test_fail

test_pass