- Head is a bit sticky, but cleanable and clean
- Small buble inside = no need to refill the head
- limited number of pins... with a connector with screws. Opened:
- 3 sets of coax
- 1 pair of black/white cables
- Few cables for an EEPROM
- 3 pairs of coax : low impedance: 3 piezos?
- Test with a set of modules: only yellow cable
- Impedance between black and white cables is that of a motor. To try. 5V applied shift the piezo.
- Using still KretzControl
- Using M1 at high for slowing down. 50ms period (20fps).
- Probe used: hp2121
ToTag (category: ToTag).
[](@autogenerated - invisible comment)