diff --git a/VBLauncher/Classes.cs b/VBLauncher/Classes.cs
index 7eeb246..f533322 100644
--- a/VBLauncher/Classes.cs
+++ b/VBLauncher/Classes.cs
@@ -1756,7 +1756,7 @@ enum flags
         TileY,
         TileBoth,
     }
-    
+
     public struct fragment
     {
         public int width;
diff --git a/VBLauncher/EditorWindow.cs b/VBLauncher/EditorWindow.cs
index 933f23b..cc88b1e 100644
--- a/VBLauncher/EditorWindow.cs
+++ b/VBLauncher/EditorWindow.cs
@@ -52,7 +52,7 @@ public partial class EditorWindow
         0xff9bcc39 // Custom 3 (func)
     ];
 
-// not named specifically for GIAM as it's used in GIWP
+    // not named specifically for GIAM as it's used in GIWP
     private readonly string[] _ammoTypes =
     [
         "None", "15mm EC", ".223", ".22/.22 Injector", "Empty", "2mm EC", ".30", "40mm", ".44", ".45", ".50", "7.62mm",
@@ -87,7 +87,7 @@ public partial class EditorWindow
     private readonly string[] _gwamDamageTypes = ["Ballistic", "Bio", "Electric", "EMP", "General", "Heat"];
     private readonly string[] _triggerTypes = ["Building", "Script", "Transition"];
 
-// ReSharper disable once InconsistentNaming - 2 is part of the abbreviation
+    // ReSharper disable once InconsistentNaming - 2 is part of the abbreviation
     private int _2mwtChunk;
     private CommandList _commandList;
     private ImFontPtr? _consoleFont;
@@ -112,7 +112,7 @@ public partial class EditorWindow
     private int _emnoIndex;
     private string[] _emnoNames = [];
 
-// EMNP is most similar to 2MWT, single EMNP section with multiple "chunks"
+    // EMNP is most similar to 2MWT, single EMNP section with multiple "chunks"
     private int _emnpChunk;
 
     private int _emsdIndex;
@@ -396,94 +396,94 @@ private void DrawImGui()
                         ResetTempValues();
                         _currentFile = s switch
                         {
-                            ".amo" => new AMO(),
-                            ".arm" => new ARM(),
-                            ".con" => new USE(USEType.CON),
-                            ".crt" => new CRT(),
-                            ".dor" => new USE(USEType.DOR),
-                            //".int" => new INT(),
-                            ".itm" => new ITM(),
-                            ".map" => new Map(),
-                            ".use" => new USE(),
-                            ".veg" => new VEG([]),
+                        ".amo" => new AMO(),
+                        ".arm" => new ARM(),
+                        ".con" => new USE(USEType.CON),
+                        ".crt" => new CRT(),
+                        ".dor" => new USE(USEType.DOR),
+                        //".int" => new INT(),
+                        ".itm" => new ITM(),
+                        ".map" => new Map(),
+                        ".use" => new USE(),
+                        ".veg" => new VEG([]),
                             ".wea" => new WEA(),
                             _ => throw new ArgumentOutOfRangeException()
                         };
-                        if (s == ".veg") InitVEG();
-                    }
-
-                    ImGui.EndMenu();
+                    if (s == ".veg") InitVEG();
                 }
 
-                if (ImGui.MenuItem("Open", "Ctrl+O"))
-                    OpenFile();
-                if (ImGui.MenuItem("Open From .grp"))
-                    OpenFromGRP();
-                if (ImGui.MenuItem("Save", "Ctrl+S"))
-                    SaveFile();
                 ImGui.EndMenu();
             }
 
-            if (ImGui.BeginMenu("Options"))
+            if (ImGui.MenuItem("Open", "Ctrl+O"))
+                OpenFile();
+            if (ImGui.MenuItem("Open From .grp"))
+                OpenFromGRP();
+            if (ImGui.MenuItem("Save", "Ctrl+S"))
+                SaveFile();
+            ImGui.EndMenu();
+        }
+
+        if (ImGui.BeginMenu("Options"))
+        {
+            if (ImGui.MenuItem("Set English.stf Location"))
+                SetEngStfLocation();
+            if (ImGui.MenuItem("Enable STF Editing", "", Settings.Default.STFEditEnabled))
             {
-                if (ImGui.MenuItem("Set English.stf Location"))
-                    SetEngStfLocation();
-                if (ImGui.MenuItem("Enable STF Editing", "", Settings.Default.STFEditEnabled))
+                Settings.Default.STFEditEnabled = !Settings.Default.STFEditEnabled;
+                Settings.Default.Save();
+            }
+
+            ImGui.EndMenu();
+        }
+
+        if (ImGui.BeginMenu("Tools"))
+        {
+            if (ImGui.MenuItem(".stf to .txt"))
+                FullSTFToText();
+            if (ImGui.MenuItem(".txt to .stf"))
+                FullTextToSTF();
+            if (ImGui.MenuItem("Extract All .grp Files"))
+                ExtractAllGRPFiles();
+            if (ImGui.MenuItem("Extract + Convert All .grp Files"))
+                ExtractAllGRPFiles(true);
+            if (ImGui.MenuItem("Show .grp Browser"))
+                using (var grpb = new GrpBrowser(null, true))
                 {
-                    Settings.Default.STFEditEnabled = !Settings.Default.STFEditEnabled;
-                    Settings.Default.Save();
+                    grpb.ShowDialog();
                 }
 
-                ImGui.EndMenu();
-            }
-
-            if (ImGui.BeginMenu("Tools"))
+            if (ImGui.MenuItem(".png to .rle"))
             {
-                if (ImGui.MenuItem(".stf to .txt"))
-                    FullSTFToText();
-                if (ImGui.MenuItem(".txt to .stf"))
-                    FullTextToSTF();
-                if (ImGui.MenuItem("Extract All .grp Files"))
-                    ExtractAllGRPFiles();
-                if (ImGui.MenuItem("Extract + Convert All .grp Files"))
-                    ExtractAllGRPFiles(true);
-                if (ImGui.MenuItem("Show .grp Browser"))
-                    using (var grpb = new GrpBrowser(null, true))
-                    {
-                        grpb.ShowDialog();
-                    }
-
-                if (ImGui.MenuItem(".png to .rle"))
+                var ofd = new OpenFileDialog
                 {
-                    var ofd = new OpenFileDialog
+                    Filter = "PNG Files|*.png",
+                    Title = "Select a PNG file to convert to RLE"
+                };
+                if (ofd.ShowDialog() == DialogResult.OK)
+                {
+                    var bmp = new Bitmap(ofd.FileName);
+                    var rle = GrpBrowser.EncodeRLE(bmp);
+                    var sfd = new SaveFileDialog
                     {
-                        Filter = "PNG Files|*.png",
-                        Title = "Select a PNG file to convert to RLE"
+                        Filter = "RLE Files|*.rle",
+                        Title = "Save the RLE file"
                     };
-                    if (ofd.ShowDialog() == DialogResult.OK)
-                    {
-                        var bmp = new Bitmap(ofd.FileName);
-                        var rle = GrpBrowser.EncodeRLE(bmp);
-                        var sfd = new SaveFileDialog
-                        {
-                            Filter = "RLE Files|*.rle",
-                            Title = "Save the RLE file"
-                        };
-                        if (sfd.ShowDialog() == DialogResult.OK)
-                            File.WriteAllBytes(sfd.FileName, rle);
-                    }
+                    if (sfd.ShowDialog() == DialogResult.OK)
+                        File.WriteAllBytes(sfd.FileName, rle);
                 }
-
-                //if (ImGui.MenuItem("Get ImGui Colours"))
-                //    File.WriteAllText("ImGuiColours.txt", GetColourCode());
-                ImGui.EndMenu();
             }
 
-            ImGui.EndMainMenuBar();
+            //if (ImGui.MenuItem("Get ImGui Colours"))
+            //    File.WriteAllText("ImGuiColours.txt", GetColourCode());
+            ImGui.EndMenu();
         }
 
-        // Create a fullscreen window for docking
-        ImGui.DockSpaceOverViewport(ImGui.GetMainViewport());
+        ImGui.EndMainMenuBar();
+    }
+
+    // Create a fullscreen window for docking
+    ImGui.DockSpaceOverViewport(ImGui.GetMainViewport());
 
         switch (_currentFile)
         {
@@ -515,1029 +515,1029 @@ private void DrawImGui()
                 DrawINT();
                 break;
         }
-    }
+}
 
 // reset all temporary values used in the editor (indexes, lists, etc.)
-    private void ResetTempValues()
+private void ResetTempValues()
+{
+    _eeovSelected = -1;
+    _eeovTemp = "";
+    _gcreSpecial = 0;
+    _gcreSkill = 0;
+    _gcreTrait = 0;
+    _gcreTag = 0;
+    _gcreSocket = 0;
+    _gcreEquipped = -1;
+    _gcreTemp = "";
+    _gwamIndex = 0;
+    _gwamNames = [];
+    _eme2Index = 0;
+    _eme2Names = [];
+    _emepIndex = 0;
+    _emepNames = [];
+    _emefIndex = 0;
+    _emefNames = [];
+    _emsdIndex = 0;
+    _emsdNames = [];
+    _epthIndex = 0;
+    _epthNames = [];
+    _epthPoint = 0;
+    _triggerIndex = 0;
+    _triggerNames = [];
+    _triggerPoint = 0;
+    _2mwtChunk = 0;
+}
+
+private void STFBox(string text, ref int sr)
+{
+    ImGui.Text(text);
+    ImGui.InputInt("##" + text, ref sr);
+    if (sr == 0) return;
+    ImGui.SameLine();
+    ImGui.PushItemWidth(-1);
+    if (!Settings.Default.STFEditEnabled)
+        ImGui.BeginDisabled();
+    if (sr == _stf.Length)
     {
-        _eeovSelected = -1;
-        _eeovTemp = "";
-        _gcreSpecial = 0;
-        _gcreSkill = 0;
-        _gcreTrait = 0;
-        _gcreTag = 0;
-        _gcreSocket = 0;
-        _gcreEquipped = -1;
-        _gcreTemp = "";
-        _gwamIndex = 0;
-        _gwamNames = [];
-        _eme2Index = 0;
-        _eme2Names = [];
-        _emepIndex = 0;
-        _emepNames = [];
-        _emefIndex = 0;
-        _emefNames = [];
-        _emsdIndex = 0;
-        _emsdNames = [];
-        _epthIndex = 0;
-        _epthNames = [];
-        _epthPoint = 0;
-        _triggerIndex = 0;
-        _triggerNames = [];
-        _triggerPoint = 0;
-        _2mwtChunk = 0;
+        Array.Resize(ref _stf, _stf.Length + 1);
+        _stf[sr] = "";
     }
 
-    private void STFBox(string text, ref int sr)
-    {
-        ImGui.Text(text);
-        ImGui.InputInt("##" + text, ref sr);
-        if (sr == 0) return;
-        ImGui.SameLine();
-        ImGui.PushItemWidth(-1);
-        if (!Settings.Default.STFEditEnabled)
-            ImGui.BeginDisabled();
-        if (sr == _stf.Length)
-        {
-            Array.Resize(ref _stf, _stf.Length + 1);
-            _stf[sr] = "";
-        }
+    ImGui.InputText("##" + text + "in", ref _stf[sr - 1], 100u);
+    if (!Settings.Default.STFEditEnabled)
+        ImGui.EndDisabled();
+    ImGui.PopItemWidth();
+}
 
-        ImGui.InputText("##" + text + "in", ref _stf[sr - 1], 100u);
-        if (!Settings.Default.STFEditEnabled)
-            ImGui.EndDisabled();
-        ImGui.PopItemWidth();
-    }
+private void HelpMarker(string desc)
+{
+    ImGui.TextDisabled("(?)");
+    if (!ImGui.IsItemHovered(ImGuiHoveredFlags.DelayShort)) return;
+    ImGui.BeginTooltip();
+    ImGui.PushTextWrapPos(ImGui.GetFontSize() * 35.0f);
+    ImGui.TextUnformatted(desc);
+    ImGui.PopTextWrapPos();
+    ImGui.EndTooltip();
+}
+
+private void DrawCRT()
+{
+    DrawEEN2();
+    DrawGENT();
+    DrawGCHR();
+    DrawGCRE();
+    DrawGWAM();
+}
+
+private void DrawITM()
+{
+    DrawEEN2();
+    DrawGENT();
+    DrawGITM();
+}
+
+private void DrawMap()
+{
+    DrawEMAP();
+    DrawEME2();
+    DrawECAM();
+    DrawEMEP();
+    DrawEMEF();
+    DrawEMSD();
+    DrawEPTH();
+    DrawTrigger();
+    Draw2MWT();
+    DrawEMFG();
+    DrawEMNO();
+    DrawEMNP();
+}
+
+private void DrawUSE()
+{
+    DrawEEN2();
+    DrawGENT();
+    DrawGOBJ();
+}
+
+private void DrawARM()
+{
+    DrawITM();
+    DrawGIAR();
+}
+
+private void DrawAMO()
+{
+    DrawITM();
+    DrawGIAM();
+}
+
+private void DrawWEA()
+{
+    DrawITM();
+    DrawGIWP();
+}
 
-    private void HelpMarker(string desc)
+private void InitVEG()
+{
+    var pushed = false;
+    if (_consoleFont is { } font)
     {
-        ImGui.TextDisabled("(?)");
-        if (!ImGui.IsItemHovered(ImGuiHoveredFlags.DelayShort)) return;
-        ImGui.BeginTooltip();
-        ImGui.PushTextWrapPos(ImGui.GetFontSize() * 35.0f);
-        ImGui.TextUnformatted(desc);
-        ImGui.PopTextWrapPos();
-        ImGui.EndTooltip();
+        ImGui.PushFont(font);
+        pushed = true;
     }
 
-    private void DrawCRT()
+    _vegTextEditor = new TextEditor
     {
-        DrawEEN2();
-        DrawGENT();
-        DrawGCHR();
-        DrawGCRE();
-        DrawGWAM();
-    }
+        Options =
+            {
+                IsColorizerEnabled = true
+            },
+        Renderer =
+            {
+                IsShowingWhitespace = false,
+                Palette = _vegPalette
+            },
+        SyntaxHighlighter = new VEGSyntaxHighlighter()
+    };
+    if (pushed) ImGui.PopFont();
+}
 
-    private void DrawITM()
+private void DrawVEG()
+{
+    ImGui.Begin("VEG Editor");
+    // VEG is stored as binary but edited in a custom textual language (based on .G3D)
+    var pushed = false;
+    if (_consoleFont is { } font)
     {
-        DrawEEN2();
-        DrawGENT();
-        DrawGITM();
+        ImGui.PushFont(font);
+        pushed = true;
     }
 
-    private void DrawMap()
+    _vegTextEditor.Render("VEG Editor", new Vector2(0, 0));
+    if (pushed) ImGui.PopFont();
+}
+
+private void DrawINT()
+{
+    ImGui.Begin("INT");
+    if (_currentFile.INT is not INT gui) return;
+    ImGui.PushItemWidth(-1);
+    ImGui.End();
+}
+
+private void DrawEEN2()
+{
+    if (_currentFile.EEN2 is not EEN2c een2) return;
+    ImGui.Begin("EEN2");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Model Prefix");
+    ImGui.InputText("##ModelPrefix", ref een2.skl, 100u);
+    ImGui.Text("Inventory Icon");
+    ImGui.InputText("##InventoryIcon", ref een2.invtex, 100u);
+    ImGui.Text("Action Bar Icon");
+    ImGui.InputText("##ActionBarIcon", ref een2.acttex, 100u);
+    ImGui.Checkbox("Selectable", ref een2.sel);
+    ImGui.PopItemWidth();
+    DrawEEOV(een2.EEOV);
+    ImGui.End();
+}
+
+private void DrawEEOV(EEOVc eeov)
+{
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Entity Name");
+    ImGui.InputText("##EntityName", ref eeov.s1, 100u);
+    ImGui.Text("Dialog File");
+    ImGui.InputText("##DialogFile", ref eeov.s2, 100u);
+    ImGui.Text("Script File");
+    ImGui.InputText("##ScriptFile", ref eeov.s3, 100u);
+    ImGui.Text("Skin Texture");
+    ImGui.InputText("##SkinTexture", ref eeov.s4, 100u);
+    ImGui.Text("Effect File");
+    ImGui.InputText("##EffectFile", ref eeov.s5, 100u);
+    ImGui.Text("Inventory");
+    ImGui.ListBox("##Inventory", ref _eeovSelected, eeov.inv, eeov.inv.Length);
+    ImGui.PopItemWidth();
+    ImGui.PushItemWidth(ImGui.GetWindowWidth() - 78);
+    ImGui.InputText("##InventoryItem", ref _eeovTemp, 100u);
+    ImGui.PopItemWidth();
+    ImGui.SameLine();
+    if (ImGui.Button(" + ##Inventory"))
     {
-        DrawEMAP();
-        DrawEME2();
-        DrawECAM();
-        DrawEMEP();
-        DrawEMEF();
-        DrawEMSD();
-        DrawEPTH();
-        DrawTrigger();
-        Draw2MWT();
-        DrawEMFG();
-        DrawEMNO();
-        DrawEMNP();
+        if (string.IsNullOrWhiteSpace(_eeovTemp)) return;
+        eeov.inv = eeov.inv.Append(_eeovTemp).ToArray();
+        _eeovTemp = "";
     }
 
-    private void DrawUSE()
+    ImGui.SameLine();
+    if (!ImGui.Button(" - ##Inventory")) return;
+    if (_eeovSelected == -1) return;
+    var tmp = eeov.inv.ToList();
+    tmp.RemoveAt(_eeovSelected);
+    eeov.inv = tmp.ToArray();
+    _eeovSelected = -1;
+}
+
+private void DrawGENT()
+{
+    if (_currentFile.GENT is not GENTc gent) return;
+    ImGui.Begin("GENT");
+    ImGui.PushItemWidth(200f);
+    STFBox("Hover String", ref gent.HoverSR);
+    STFBox("Look String", ref gent.LookSR);
+    STFBox("Name String", ref gent.NameSR);
+    STFBox("Unknown String", ref gent.UnkwnSR);
+    ImGui.Columns(2, "health");
+    ImGui.SetColumnWidth(0, 215);
+    ImGui.SetColumnWidth(1, 215);
+    ImGui.PushItemWidth(200);
+    ImGui.Text("Max Health");
+    ImGui.InputInt("##Health", ref gent.MaxHealth);
+    ImGui.NextColumn();
+    ImGui.PushItemWidth(200);
+    ImGui.Text("Initial Health");
+    ImGui.InputInt("##InitHealth", ref gent.StartHealth);
+    ImGui.Columns();
+    ImGui.End();
+}
+
+private void DrawGCHR()
+{
+    if (_currentFile.GCHR is not GCHRc gchr) return;
+    ImGui.Begin("GCHR");
+    ImGui.Text("Name");
+    ImGui.InputText("##Name", ref gchr.name, 100u);
+    ImGui.End();
+}
+
+private void DrawGCRE()
+{
+    if (_currentFile.GCRE is not GCREc gcre) return;
+    ImGui.Begin("GCRE");
+    ImGui.Columns(2, "gcreColumns");
+    ImGui.Text("Special");
+    ImGui.Combo("##Special", ref _gcreSpecial, _gcreSpecials, _gcreSpecials.Length);
+    ImGui.SameLine();
+    ImGui.PushItemWidth(-1);
+    ImGui.InputInt("##SpecialVal", ref gcre.Special[_gcreSpecial]);
+    ImGui.PopItemWidth();
+    ImGui.Text("Skills");
+    ImGui.Combo("##Skills", ref _gcreSkill, _gcreSkills, _gcreSkills.Length);
+    var skill = gcre.Skills.FirstOrDefault(s => s.Index == _gcreSkill);
+    ImGui.PushItemWidth(-1);
+    ImGui.SameLine();
+    if (skill is not null)
     {
-        DrawEEN2();
-        DrawGENT();
-        DrawGOBJ();
+        ImGui.InputInt("##SkillVal", ref skill.Value);
     }
-
-    private void DrawARM()
+    else
     {
-        DrawITM();
-        DrawGIAR();
+        var tmpVal = 0;
+        if (ImGui.InputInt("##SkillVal", ref tmpVal) && tmpVal != 0) gcre.Skills.Add(new Skill(_gcreSkill, tmpVal));
     }
 
-    private void DrawAMO()
+    ImGui.PopItemWidth();
+    ImGui.Text("Traits");
+    ImGui.Combo("##Traits", ref _gcreTrait, _gcreTraits, _gcreTraits.Length);
+    var traitSel = gcre.Traits.Contains(_gcreTrait);
+    ImGui.SameLine();
+    if (ImGui.Checkbox("Trait Active", ref traitSel))
     {
-        DrawITM();
-        DrawGIAM();
+        if (traitSel)
+            gcre.Traits.Add(_gcreTrait);
+        else
+            gcre.Traits.Remove(_gcreTrait);
     }
 
-    private void DrawWEA()
+    ImGui.Text("Tag Skills");
+    ImGui.Combo("##TagSkills", ref _gcreTag, _gcreSkills, _gcreSkills.Length);
+    var tagSel = gcre.TagSkills.Contains(_gcreTag);
+    ImGui.SameLine();
+    if (ImGui.Checkbox("Tag Active", ref tagSel))
     {
-        DrawITM();
-        DrawGIWP();
+        if (tagSel)
+            gcre.TagSkills.Add(_gcreTag);
+        else
+            gcre.TagSkills.Remove(_gcreTag);
     }
 
-    private void InitVEG()
+    ImGui.Text("Portrait");
+    ImGui.InputText("##Portrait", ref gcre.PortStr, 100u);
+    ImGui.Text("Age");
+    ImGui.InputInt("##Age", ref gcre.Age);
+    ImGui.NextColumn();
+    ImGui.Text("Socket");
+    ImGui.Combo("##Socket", ref _gcreSocket, _gcreSockets, _gcreSockets.Length);
+    var sock = _gcreSocket switch
     {
-        var pushed = false;
-        if (_consoleFont is { } font)
-        {
-            ImGui.PushFont(font);
-            pushed = true;
-        }
-
-        _vegTextEditor = new TextEditor
-        {
-            Options =
-            {
-                IsColorizerEnabled = true
-            },
-            Renderer =
-            {
-                IsShowingWhitespace = false,
-                Palette = _vegPalette
-            },
-            SyntaxHighlighter = new VEGSyntaxHighlighter()
-        };
-        if (pushed) ImGui.PopFont();
+        0 => gcre.Hea,
+        1 => gcre.Hai,
+        2 => gcre.Pon,
+        3 => gcre.Mus,
+        4 => gcre.Bea,
+        5 => gcre.Eye,
+        6 => gcre.Bod,
+        7 => gcre.Han,
+        8 => gcre.Fee,
+        9 => gcre.Bac,
+        10 => gcre.Sho,
+        11 => gcre.Van,
+        _ => throw new ArgumentOutOfRangeException()
+    };
+    ImGui.Text("Socket Model");
+    ImGui.InputText("##Model", ref sock.Model, 100u);
+    ImGui.Text("Socket Texture");
+    ImGui.InputText("##Texture", ref sock.Tex, 100u);
+    ImGui.Text("Equipped Items");
+    ImGui.ListBox("##Equipped", ref _gcreEquipped, gcre.Inventory, gcre.Inventory.Length);
+    ImGui.InputText("##EquippedItem", ref _gcreTemp, 100u);
+    ImGui.SameLine();
+    if (ImGui.Button(" + ##Equipped"))
+    {
+        if (string.IsNullOrWhiteSpace(_gcreTemp)) return;
+        gcre.Inventory = gcre.Inventory.Append(_gcreTemp).ToArray();
+        _gcreTemp = "";
     }
 
-    private void DrawVEG()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ##Equipped"))
     {
-        ImGui.Begin("VEG Editor");
-        // VEG is stored as binary but edited in a custom textual language (based on .G3D)
-        var pushed = false;
-        if (_consoleFont is { } font)
-        {
-            ImGui.PushFont(font);
-            pushed = true;
-        }
-
-        _vegTextEditor.Render("VEG Editor", new Vector2(0, 0));
-        if (pushed) ImGui.PopFont();
+        if (_gcreEquipped == -1) return;
+        var tmp = gcre.Inventory.ToList();
+        tmp.RemoveAt(_gcreEquipped);
+        gcre.Inventory = tmp.ToArray();
+        _gcreEquipped = -1;
     }
-    
-    private void DrawINT()
+
+    _gwamNames = gcre.GWAM.Select(i => i.NameSR == 0 ? "" : _stf[i.NameSR - 1]).ToArray();
+    ImGui.End();
+}
+
+private void DrawGWAM()
+{
+    if (_currentFile.GCRE is not GCREc gcre) return;
+    ImGui.Begin("GWAM");
+    // i believe every isntance of GWAM can have more than one.
+    ImGui.Combo("##gwams", ref _gwamIndex, _gwamNames, _gwamNames.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        ImGui.Begin("INT");
-        if (_currentFile.INT is not INT gui) return;
-        ImGui.PushItemWidth(-1);
-        ImGui.End();
+        gcre.GWAM.Add(new GWAMc());
+        _gwamIndex = gcre.GWAM.Count - 1;
     }
 
-    private void DrawEEN2()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && gcre.GWAM.Count > 0)
+        gcre.GWAM.RemoveAt(_gwamIndex);
+    if (_gwamIndex >= gcre.GWAM.Count)
+        _gwamIndex = gcre.GWAM.Count - 1;
+    if (gcre.GWAM.Count == 0)
     {
-        if (_currentFile.EEN2 is not EEN2c een2) return;
-        ImGui.Begin("EEN2");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Model Prefix");
-        ImGui.InputText("##ModelPrefix", ref een2.skl, 100u);
-        ImGui.Text("Inventory Icon");
-        ImGui.InputText("##InventoryIcon", ref een2.invtex, 100u);
-        ImGui.Text("Action Bar Icon");
-        ImGui.InputText("##ActionBarIcon", ref een2.acttex, 100u);
-        ImGui.Checkbox("Selectable", ref een2.sel);
-        ImGui.PopItemWidth();
-        DrawEEOV(een2.EEOV);
         ImGui.End();
+        return;
     }
 
-    private void DrawEEOV(EEOVc eeov)
+    var gwam = gcre.GWAM[_gwamIndex];
+    // .wea also has GWAM but isn't implemented yet. get later.
+    ImGui.Columns(3, "gwamColumns");
+    ImGui.Text("Animation");
+    ImGui.InputInt("##Animation", ref gwam.Anim);
+    ImGui.Text("Range");
+    ImGui.InputInt("##Range", ref gwam.Range);
+    ImGui.Text("Action Points");
+    ImGui.InputInt("##AP", ref gwam.AP);
+    ImGui.NextColumn();
+    ImGui.Text("Damage Type");
+    ImGui.Combo("##DamageType", ref gwam.DmgType, _gwamDamageTypes, _gwamDamageTypes.Length);
+    ImGui.Text("Min Dmg");
+    ImGui.InputInt("##MinDmg", ref gwam.MinDmg);
+    ImGui.NextColumn();
+    ImGui.Text("Shots Fired");
+    ImGui.InputInt("##ShotsFired", ref gwam.ShotsFired);
+    ImGui.Text("Max Dmg");
+    ImGui.InputInt("##MaxDmg", ref gwam.MaxDmg);
+    ImGui.Columns();
+    STFBox("Attack Name", ref gwam.NameSR);
+    ImGui.Text("Effect");
+    ImGui.InputText("##Effect", ref gwam.VegName, 100u);
+    ImGui.End();
+}
+
+private void DrawGITM()
+{
+    if (_currentFile.GITM is not GITMc gitm) return;
+    ImGui.Begin("GITM");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Type");
+    ImGui.Combo("##Type", ref gitm.type, _gitmTypes, _gitmTypes.Length);
+    ImGui.Text("Slot");
+    ImGui.Combo("##Slot", ref gitm.eqslot, _gitmSlots, _gitmSlots.Length);
+    ImGui.Checkbox("Equippable", ref gitm.equip);
+    ImGui.Text("Reload");
+    ImGui.InputInt("##Reload", ref gitm.reload);
+    // TODO: figure out how melee works
+    var tempBool = false;
+    ImGui.Checkbox("Melee", ref tempBool);
+
+    ImGui.Text("Hide Socket");
+    ImGui.Checkbox("Hair", ref gitm.hHai);
+    ImGui.SameLine();
+    ImGui.Checkbox("Beard", ref gitm.hBea);
+    ImGui.SameLine();
+    ImGui.Checkbox("Moustache", ref gitm.hMus);
+    ImGui.SameLine();
+    ImGui.Checkbox("Eye", ref gitm.hEye);
+    ImGui.SameLine();
+    ImGui.Checkbox("Ponytail", ref gitm.hPon);
+    ImGui.SameLine();
+    ImGui.Checkbox("Vanity", ref gitm.hVan);
+
+    ImGui.Text("Socket");
+    ImGui.Combo("##Socket", ref _gitmSocket, _gitmSockets, _gitmSockets.Length);
+    var sock = _gitmSocket switch
     {
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Entity Name");
-        ImGui.InputText("##EntityName", ref eeov.s1, 100u);
-        ImGui.Text("Dialog File");
-        ImGui.InputText("##DialogFile", ref eeov.s2, 100u);
-        ImGui.Text("Script File");
-        ImGui.InputText("##ScriptFile", ref eeov.s3, 100u);
-        ImGui.Text("Skin Texture");
-        ImGui.InputText("##SkinTexture", ref eeov.s4, 100u);
-        ImGui.Text("Effect File");
-        ImGui.InputText("##EffectFile", ref eeov.s5, 100u);
-        ImGui.Text("Inventory");
-        ImGui.ListBox("##Inventory", ref _eeovSelected, eeov.inv, eeov.inv.Length);
-        ImGui.PopItemWidth();
-        ImGui.PushItemWidth(ImGui.GetWindowWidth() - 78);
-        ImGui.InputText("##InventoryItem", ref _eeovTemp, 100u);
-        ImGui.PopItemWidth();
-        ImGui.SameLine();
-        if (ImGui.Button(" + ##Inventory"))
-        {
-            if (string.IsNullOrWhiteSpace(_eeovTemp)) return;
-            eeov.inv = eeov.inv.Append(_eeovTemp).ToArray();
-            _eeovTemp = "";
-        }
-
-        ImGui.SameLine();
-        if (!ImGui.Button(" - ##Inventory")) return;
-        if (_eeovSelected == -1) return;
-        var tmp = eeov.inv.ToList();
-        tmp.RemoveAt(_eeovSelected);
-        eeov.inv = tmp.ToArray();
-        _eeovSelected = -1;
+        0 => gitm.Eye,
+        1 => gitm.Bod,
+        2 => gitm.Bac,
+        3 => gitm.Han,
+        4 => gitm.Fee,
+        5 => gitm.Sho,
+        6 => gitm.Van,
+        7 => gitm.IHS,
+        _ => throw new ArgumentOutOfRangeException()
+    };
+    ImGui.Text("Socket Model");
+    ImGui.InputText("##Model", ref sock.Model, 100u);
+    ImGui.Text("Socket Texture");
+    ImGui.InputText("##Texture", ref sock.Tex, 100u);
+    ImGui.PopItemWidth();
+    ImGui.End();
+}
+
+private void DrawEMAP()
+{
+    if (_currentFile.EMAP is not EMAPc emap) return;
+    _emapColor = ColToVec3(emap.col);
+    ImGui.Begin("EMAP");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Map Mesh");
+    ImGui.InputText("##MapMesh", ref emap.s1, 100u);
+    ImGui.Text("Height Map");
+    ImGui.InputText("##HeightMap", ref emap.s2, 100u);
+    ImGui.Text("Minimap Texture");
+    ImGui.InputText("##MinimapTexture", ref emap.s3, 100u);
+    ImGui.Text("Lighting Colour");
+    ImGui.ColorEdit3("Lighting Colour", ref _emapColor);
+    emap.col = Color.FromArgb(255, (int)(_emapColor.X * 255), (int)(_emapColor.Y * 255), (int)(_emapColor.Z * 255));
+    ImGui.Checkbox("Ignore Lighting", ref emap.il);
+    ImGui.End();
+    if (_currentFile is not Map map) return;
+
+    if (_currentFile.EME2.Count > 0)
+        _eme2Names = map.EME2.Select(e => e.name).ToArray();
+    if (_currentFile.EMEP.Count > 0)
+        _emepNames = map.EMEP.Select(e => e.index.ToString()).ToArray();
+    if (_currentFile.EMEF.Count > 0)
+        _emefNames = map.EMEF.Select(e => e.s1).ToArray();
+    if (_currentFile.EMSD.Count > 0)
+        _emsdNames = map.EMSD.Select(e => e.s1).ToArray();
+    if (_currentFile.EPTH.Count > 0)
+        _epthNames = map.EPTH.Select(e => e.name).ToArray();
+    if (_currentFile.Triggers.Count <= 0) return;
+    _triggerNames = new string[_currentFile.Triggers.Count];
+    for (var i = 0; i < _currentFile.Triggers.Count; i++)
+        _triggerNames[i] = i.ToString();
+}
+
+private void DrawEME2()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EME2");
+    ImGui.Combo("##EME2", ref _eme2Index, _eme2Names, _eme2Names.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
+    {
+        map.EME2.Add(new EME2c());
+        _eme2Index = map.EME2.Count - 1;
     }
 
-    private void DrawGENT()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.EME2.Count > 0)
+        map.EME2.RemoveAt(_eme2Index);
+    if (_eme2Index >= map.EME2.Count)
+        _eme2Index = map.EME2.Count - 1;
+    if (map.EME2.Count == 0)
     {
-        if (_currentFile.GENT is not GENTc gent) return;
-        ImGui.Begin("GENT");
-        ImGui.PushItemWidth(200f);
-        STFBox("Hover String", ref gent.HoverSR);
-        STFBox("Look String", ref gent.LookSR);
-        STFBox("Name String", ref gent.NameSR);
-        STFBox("Unknown String", ref gent.UnkwnSR);
-        ImGui.Columns(2, "health");
-        ImGui.SetColumnWidth(0, 215);
-        ImGui.SetColumnWidth(1, 215);
-        ImGui.PushItemWidth(200);
-        ImGui.Text("Max Health");
-        ImGui.InputInt("##Health", ref gent.MaxHealth);
-        ImGui.NextColumn();
-        ImGui.PushItemWidth(200);
-        ImGui.Text("Initial Health");
-        ImGui.InputInt("##InitHealth", ref gent.StartHealth);
-        ImGui.Columns();
         ImGui.End();
+        return;
     }
 
-    private void DrawGCHR()
+    var eme2 = map.EME2[_eme2Index];
+    ImGui.Text("Creature File");
+    ImGui.InputText("##CreatureFile", ref eme2.name, 100u);
+    DrawEEOV(eme2.EEOV);
+    ImGui.InputFloat4("XYZR", ref eme2.l);
+    ImGui.End();
+}
+
+private void DrawECAM()
+{
+    if (_currentFile.ECAM is not ECAMc ecam) return;
+    ImGui.Begin("ECAM");
+    ImGui.Text("Camera Position");
+    ImGui.InputFloat4("##XYZR", ref ecam.p);
+    ImGui.End();
+}
+
+private void DrawEMEP()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EMEP");
+    ImGui.Combo("##EMEP", ref _emepIndex, _emepNames, _emepNames.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        if (_currentFile.GCHR is not GCHRc gchr) return;
-        ImGui.Begin("GCHR");
-        ImGui.Text("Name");
-        ImGui.InputText("##Name", ref gchr.name, 100u);
-        ImGui.End();
+        map.EMEP.Add(new EMEPc());
+        _emepIndex = map.EMEP.Count - 1;
     }
 
-    private void DrawGCRE()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.EMEP.Count > 0)
+        map.EMEP.RemoveAt(_emepIndex);
+    if (_emepIndex >= map.EMEP.Count)
+        _emepIndex = map.EMEP.Count - 1;
+    if (map.EMEP.Count == 0)
     {
-        if (_currentFile.GCRE is not GCREc gcre) return;
-        ImGui.Begin("GCRE");
-        ImGui.Columns(2, "gcreColumns");
-        ImGui.Text("Special");
-        ImGui.Combo("##Special", ref _gcreSpecial, _gcreSpecials, _gcreSpecials.Length);
-        ImGui.SameLine();
-        ImGui.PushItemWidth(-1);
-        ImGui.InputInt("##SpecialVal", ref gcre.Special[_gcreSpecial]);
-        ImGui.PopItemWidth();
-        ImGui.Text("Skills");
-        ImGui.Combo("##Skills", ref _gcreSkill, _gcreSkills, _gcreSkills.Length);
-        var skill = gcre.Skills.FirstOrDefault(s => s.Index == _gcreSkill);
-        ImGui.PushItemWidth(-1);
-        ImGui.SameLine();
-        if (skill is not null)
-        {
-            ImGui.InputInt("##SkillVal", ref skill.Value);
-        }
-        else
-        {
-            var tmpVal = 0;
-            if (ImGui.InputInt("##SkillVal", ref tmpVal) && tmpVal != 0) gcre.Skills.Add(new Skill(_gcreSkill, tmpVal));
-        }
-
-        ImGui.PopItemWidth();
-        ImGui.Text("Traits");
-        ImGui.Combo("##Traits", ref _gcreTrait, _gcreTraits, _gcreTraits.Length);
-        var traitSel = gcre.Traits.Contains(_gcreTrait);
-        ImGui.SameLine();
-        if (ImGui.Checkbox("Trait Active", ref traitSel))
-        {
-            if (traitSel)
-                gcre.Traits.Add(_gcreTrait);
-            else
-                gcre.Traits.Remove(_gcreTrait);
-        }
-
-        ImGui.Text("Tag Skills");
-        ImGui.Combo("##TagSkills", ref _gcreTag, _gcreSkills, _gcreSkills.Length);
-        var tagSel = gcre.TagSkills.Contains(_gcreTag);
-        ImGui.SameLine();
-        if (ImGui.Checkbox("Tag Active", ref tagSel))
-        {
-            if (tagSel)
-                gcre.TagSkills.Add(_gcreTag);
-            else
-                gcre.TagSkills.Remove(_gcreTag);
-        }
-
-        ImGui.Text("Portrait");
-        ImGui.InputText("##Portrait", ref gcre.PortStr, 100u);
-        ImGui.Text("Age");
-        ImGui.InputInt("##Age", ref gcre.Age);
-        ImGui.NextColumn();
-        ImGui.Text("Socket");
-        ImGui.Combo("##Socket", ref _gcreSocket, _gcreSockets, _gcreSockets.Length);
-        var sock = _gcreSocket switch
-        {
-            0 => gcre.Hea,
-            1 => gcre.Hai,
-            2 => gcre.Pon,
-            3 => gcre.Mus,
-            4 => gcre.Bea,
-            5 => gcre.Eye,
-            6 => gcre.Bod,
-            7 => gcre.Han,
-            8 => gcre.Fee,
-            9 => gcre.Bac,
-            10 => gcre.Sho,
-            11 => gcre.Van,
-            _ => throw new ArgumentOutOfRangeException()
-        };
-        ImGui.Text("Socket Model");
-        ImGui.InputText("##Model", ref sock.Model, 100u);
-        ImGui.Text("Socket Texture");
-        ImGui.InputText("##Texture", ref sock.Tex, 100u);
-        ImGui.Text("Equipped Items");
-        ImGui.ListBox("##Equipped", ref _gcreEquipped, gcre.Inventory, gcre.Inventory.Length);
-        ImGui.InputText("##EquippedItem", ref _gcreTemp, 100u);
-        ImGui.SameLine();
-        if (ImGui.Button(" + ##Equipped"))
-        {
-            if (string.IsNullOrWhiteSpace(_gcreTemp)) return;
-            gcre.Inventory = gcre.Inventory.Append(_gcreTemp).ToArray();
-            _gcreTemp = "";
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ##Equipped"))
-        {
-            if (_gcreEquipped == -1) return;
-            var tmp = gcre.Inventory.ToList();
-            tmp.RemoveAt(_gcreEquipped);
-            gcre.Inventory = tmp.ToArray();
-            _gcreEquipped = -1;
-        }
-
-        _gwamNames = gcre.GWAM.Select(i => i.NameSR == 0 ? "" : _stf[i.NameSR - 1]).ToArray();
         ImGui.End();
+        return;
     }
 
-    private void DrawGWAM()
+    var emep = map.EMEP[_emepIndex];
+    ImGui.Text("Entry Point ID");
+    ImGui.InputInt("##EntryPointID", ref emep.index);
+    ImGui.Text("Position");
+    ImGui.InputFloat3("##XYZ", ref emep.p);
+    ImGui.SameLine();
+    ImGui.InputFloat("##R", ref emep.r);
+    ImGui.End();
+}
+
+private void DrawEMEF()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EMEF");
+    ImGui.Combo("##EMEF", ref _emefIndex, _emefNames, _emefNames.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        if (_currentFile.GCRE is not GCREc gcre) return;
-        ImGui.Begin("GWAM");
-        // i believe every isntance of GWAM can have more than one.
-        ImGui.Combo("##gwams", ref _gwamIndex, _gwamNames, _gwamNames.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            gcre.GWAM.Add(new GWAMc());
-            _gwamIndex = gcre.GWAM.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && gcre.GWAM.Count > 0)
-            gcre.GWAM.RemoveAt(_gwamIndex);
-        if (_gwamIndex >= gcre.GWAM.Count)
-            _gwamIndex = gcre.GWAM.Count - 1;
-        if (gcre.GWAM.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var gwam = gcre.GWAM[_gwamIndex];
-        // .wea also has GWAM but isn't implemented yet. get later.
-        ImGui.Columns(3, "gwamColumns");
-        ImGui.Text("Animation");
-        ImGui.InputInt("##Animation", ref gwam.Anim);
-        ImGui.Text("Range");
-        ImGui.InputInt("##Range", ref gwam.Range);
-        ImGui.Text("Action Points");
-        ImGui.InputInt("##AP", ref gwam.AP);
-        ImGui.NextColumn();
-        ImGui.Text("Damage Type");
-        ImGui.Combo("##DamageType", ref gwam.DmgType, _gwamDamageTypes, _gwamDamageTypes.Length);
-        ImGui.Text("Min Dmg");
-        ImGui.InputInt("##MinDmg", ref gwam.MinDmg);
-        ImGui.NextColumn();
-        ImGui.Text("Shots Fired");
-        ImGui.InputInt("##ShotsFired", ref gwam.ShotsFired);
-        ImGui.Text("Max Dmg");
-        ImGui.InputInt("##MaxDmg", ref gwam.MaxDmg);
-        ImGui.Columns();
-        STFBox("Attack Name", ref gwam.NameSR);
-        ImGui.Text("Effect");
-        ImGui.InputText("##Effect", ref gwam.VegName, 100u);
-        ImGui.End();
+        map.EMEF.Add(new EMEFc());
+        _emefIndex = map.EMEF.Count - 1;
     }
 
-    private void DrawGITM()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.EMEF.Count > 0)
+        map.EMEF.RemoveAt(_emefIndex);
+    if (_emefIndex >= map.EMEF.Count)
+        _emefIndex = map.EMEF.Count - 1;
+    if (map.EMEF.Count == 0)
     {
-        if (_currentFile.GITM is not GITMc gitm) return;
-        ImGui.Begin("GITM");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Type");
-        ImGui.Combo("##Type", ref gitm.type, _gitmTypes, _gitmTypes.Length);
-        ImGui.Text("Slot");
-        ImGui.Combo("##Slot", ref gitm.eqslot, _gitmSlots, _gitmSlots.Length);
-        ImGui.Checkbox("Equippable", ref gitm.equip);
-        ImGui.Text("Reload");
-        ImGui.InputInt("##Reload", ref gitm.reload);
-        // TODO: figure out how melee works
-        var tempBool = false;
-        ImGui.Checkbox("Melee", ref tempBool);
-
-        ImGui.Text("Hide Socket");
-        ImGui.Checkbox("Hair", ref gitm.hHai);
-        ImGui.SameLine();
-        ImGui.Checkbox("Beard", ref gitm.hBea);
-        ImGui.SameLine();
-        ImGui.Checkbox("Moustache", ref gitm.hMus);
-        ImGui.SameLine();
-        ImGui.Checkbox("Eye", ref gitm.hEye);
-        ImGui.SameLine();
-        ImGui.Checkbox("Ponytail", ref gitm.hPon);
-        ImGui.SameLine();
-        ImGui.Checkbox("Vanity", ref gitm.hVan);
-
-        ImGui.Text("Socket");
-        ImGui.Combo("##Socket", ref _gitmSocket, _gitmSockets, _gitmSockets.Length);
-        var sock = _gitmSocket switch
-        {
-            0 => gitm.Eye,
-            1 => gitm.Bod,
-            2 => gitm.Bac,
-            3 => gitm.Han,
-            4 => gitm.Fee,
-            5 => gitm.Sho,
-            6 => gitm.Van,
-            7 => gitm.IHS,
-            _ => throw new ArgumentOutOfRangeException()
-        };
-        ImGui.Text("Socket Model");
-        ImGui.InputText("##Model", ref sock.Model, 100u);
-        ImGui.Text("Socket Texture");
-        ImGui.InputText("##Texture", ref sock.Tex, 100u);
-        ImGui.PopItemWidth();
         ImGui.End();
+        return;
     }
 
-    private void DrawEMAP()
+    var emef = map.EMEF[_emefIndex];
+    ImGui.Text("Effect ID");
+    ImGui.InputText("##EffectID", ref emef.s1, 100u);
+    ImGui.Text("Effect File");
+    ImGui.InputText("##EffectFile", ref emef.s2, 100u);
+    ImGui.Text("Position");
+    ImGui.InputFloat4("##XYZR", ref emef.l);
+    ImGui.End();
+}
+
+private void DrawEMSD()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EMSD");
+    ImGui.Combo("##EMSD", ref _emsdIndex, _emsdNames, _emsdNames.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        if (_currentFile.EMAP is not EMAPc emap) return;
-        _emapColor = ColToVec3(emap.col);
-        ImGui.Begin("EMAP");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Map Mesh");
-        ImGui.InputText("##MapMesh", ref emap.s1, 100u);
-        ImGui.Text("Height Map");
-        ImGui.InputText("##HeightMap", ref emap.s2, 100u);
-        ImGui.Text("Minimap Texture");
-        ImGui.InputText("##MinimapTexture", ref emap.s3, 100u);
-        ImGui.Text("Lighting Colour");
-        ImGui.ColorEdit3("Lighting Colour", ref _emapColor);
-        emap.col = Color.FromArgb(255, (int)(_emapColor.X * 255), (int)(_emapColor.Y * 255), (int)(_emapColor.Z * 255));
-        ImGui.Checkbox("Ignore Lighting", ref emap.il);
-        ImGui.End();
-        if (_currentFile is not Map map) return;
-
-        if (_currentFile.EME2.Count > 0)
-            _eme2Names = map.EME2.Select(e => e.name).ToArray();
-        if (_currentFile.EMEP.Count > 0)
-            _emepNames = map.EMEP.Select(e => e.index.ToString()).ToArray();
-        if (_currentFile.EMEF.Count > 0)
-            _emefNames = map.EMEF.Select(e => e.s1).ToArray();
-        if (_currentFile.EMSD.Count > 0)
-            _emsdNames = map.EMSD.Select(e => e.s1).ToArray();
-        if (_currentFile.EPTH.Count > 0)
-            _epthNames = map.EPTH.Select(e => e.name).ToArray();
-        if (_currentFile.Triggers.Count <= 0) return;
-        _triggerNames = new string[_currentFile.Triggers.Count];
-        for (var i = 0; i < _currentFile.Triggers.Count; i++)
-            _triggerNames[i] = i.ToString();
+        map.EMSD.Add(new EMSDc());
+        _emsdIndex = map.EMSD.Count - 1;
     }
 
-    private void DrawEME2()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.EMSD.Count > 0)
+        map.EMSD.RemoveAt(_emsdIndex);
+    if (_emsdIndex >= map.EMSD.Count)
+        _emsdIndex = map.EMSD.Count - 1;
+    if (map.EMSD.Count == 0)
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EME2");
-        ImGui.Combo("##EME2", ref _eme2Index, _eme2Names, _eme2Names.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            map.EME2.Add(new EME2c());
-            _eme2Index = map.EME2.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.EME2.Count > 0)
-            map.EME2.RemoveAt(_eme2Index);
-        if (_eme2Index >= map.EME2.Count)
-            _eme2Index = map.EME2.Count - 1;
-        if (map.EME2.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var eme2 = map.EME2[_eme2Index];
-        ImGui.Text("Creature File");
-        ImGui.InputText("##CreatureFile", ref eme2.name, 100u);
-        DrawEEOV(eme2.EEOV);
-        ImGui.InputFloat4("XYZR", ref eme2.l);
         ImGui.End();
+        return;
     }
 
-    private void DrawECAM()
+    var emsd = map.EMSD[_emsdIndex];
+    ImGui.Text("Sound ID");
+    ImGui.InputText("##SoundID", ref emsd.s1, 100u);
+    ImGui.Text("Sound File");
+    ImGui.InputText("##SoundFile", ref emsd.s2, 100u);
+    ImGui.Text("Position");
+    ImGui.InputFloat3("##XYZ", ref emsd.l);
+    ImGui.End();
+}
+
+private void DrawEMNO()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EMNO");
+    // get all the names of the EMNOs (use string references)
+    _emnoNames = map.EMNO.Select(e => e.sr == 0 ? map.EMNO.IndexOf(e).ToString() : _stf[e.sr - 1]).ToArray();
+    ImGui.Combo("##EMNO", ref _emnoIndex, _emnoNames, _emnoNames.Length);
+    ImGui.PushItemWidth(-1);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        if (_currentFile.ECAM is not ECAMc ecam) return;
-        ImGui.Begin("ECAM");
-        ImGui.Text("Camera Position");
-        ImGui.InputFloat4("##XYZR", ref ecam.p);
-        ImGui.End();
+        map.EMNO.Add(new EMNOc());
+        _emnoIndex = map.EMNO.Count - 1;
     }
 
-    private void DrawEMEP()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.EMNO.Count > 0)
+        map.EMNO.RemoveAt(_emnoIndex);
+    if (_emnoIndex >= map.EMNO.Count)
+        _emnoIndex = map.EMNO.Count - 1;
+    if (map.EMNO.Count == 0)
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EMEP");
-        ImGui.Combo("##EMEP", ref _emepIndex, _emepNames, _emepNames.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            map.EMEP.Add(new EMEPc());
-            _emepIndex = map.EMEP.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.EMEP.Count > 0)
-            map.EMEP.RemoveAt(_emepIndex);
-        if (_emepIndex >= map.EMEP.Count)
-            _emepIndex = map.EMEP.Count - 1;
-        if (map.EMEP.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var emep = map.EMEP[_emepIndex];
-        ImGui.Text("Entry Point ID");
-        ImGui.InputInt("##EntryPointID", ref emep.index);
-        ImGui.Text("Position");
-        ImGui.InputFloat3("##XYZ", ref emep.p);
-        ImGui.SameLine();
-        ImGui.InputFloat("##R", ref emep.r);
         ImGui.End();
+        return;
     }
 
-    private void DrawEMEF()
+    var emno = map.EMNO[_emnoIndex];
+    ImGui.Text("Position");
+    ImGui.InputFloat2("##XY", ref emno.l);
+    ImGui.Text("Icon Texture");
+    ImGui.InputText("##IconTexture", ref emno.tex, 100u);
+    ImGui.PopItemWidth();
+    STFBox("Name", ref emno.sr);
+    ImGui.End();
+}
+
+private void DrawEPTH()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EPTH");
+    ImGui.Combo("##EPTH", ref _epthIndex, _epthNames, _epthNames.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EMEF");
-        ImGui.Combo("##EMEF", ref _emefIndex, _emefNames, _emefNames.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            map.EMEF.Add(new EMEFc());
-            _emefIndex = map.EMEF.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.EMEF.Count > 0)
-            map.EMEF.RemoveAt(_emefIndex);
-        if (_emefIndex >= map.EMEF.Count)
-            _emefIndex = map.EMEF.Count - 1;
-        if (map.EMEF.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var emef = map.EMEF[_emefIndex];
-        ImGui.Text("Effect ID");
-        ImGui.InputText("##EffectID", ref emef.s1, 100u);
-        ImGui.Text("Effect File");
-        ImGui.InputText("##EffectFile", ref emef.s2, 100u);
-        ImGui.Text("Position");
-        ImGui.InputFloat4("##XYZR", ref emef.l);
-        ImGui.End();
+        map.EPTH.Add(new EPTHc());
+        _epthIndex = map.EPTH.Count - 1;
     }
 
-    private void DrawEMSD()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.EPTH.Count > 0)
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EMSD");
-        ImGui.Combo("##EMSD", ref _emsdIndex, _emsdNames, _emsdNames.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            map.EMSD.Add(new EMSDc());
-            _emsdIndex = map.EMSD.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.EMSD.Count > 0)
-            map.EMSD.RemoveAt(_emsdIndex);
-        if (_emsdIndex >= map.EMSD.Count)
-            _emsdIndex = map.EMSD.Count - 1;
-        if (map.EMSD.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var emsd = map.EMSD[_emsdIndex];
-        ImGui.Text("Sound ID");
-        ImGui.InputText("##SoundID", ref emsd.s1, 100u);
-        ImGui.Text("Sound File");
-        ImGui.InputText("##SoundFile", ref emsd.s2, 100u);
-        ImGui.Text("Position");
-        ImGui.InputFloat3("##XYZ", ref emsd.l);
-        ImGui.End();
+        map.EPTH.RemoveAt(_epthIndex);
+        _epthPoint = 0;
     }
 
-    private void DrawEMNO()
+    if (_epthIndex >= map.EPTH.Count)
+        _epthIndex = map.EPTH.Count - 1;
+    if (map.EPTH.Count == 0)
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EMNO");
-        // get all the names of the EMNOs (use string references)
-        _emnoNames = map.EMNO.Select(e => e.sr == 0 ? map.EMNO.IndexOf(e).ToString() : _stf[e.sr - 1]).ToArray();
-        ImGui.Combo("##EMNO", ref _emnoIndex, _emnoNames, _emnoNames.Length);
-        ImGui.PushItemWidth(-1);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            map.EMNO.Add(new EMNOc());
-            _emnoIndex = map.EMNO.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.EMNO.Count > 0)
-            map.EMNO.RemoveAt(_emnoIndex);
-        if (_emnoIndex >= map.EMNO.Count)
-            _emnoIndex = map.EMNO.Count - 1;
-        if (map.EMNO.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var emno = map.EMNO[_emnoIndex];
-        ImGui.Text("Position");
-        ImGui.InputFloat2("##XY", ref emno.l);
-        ImGui.Text("Icon Texture");
-        ImGui.InputText("##IconTexture", ref emno.tex, 100u);
-        ImGui.PopItemWidth();
-        STFBox("Name", ref emno.sr);
         ImGui.End();
+        return;
     }
 
-    private void DrawEPTH()
+    var epth = map.EPTH[_epthIndex];
+    ImGui.Text("Path ID");
+    ImGui.InputText("##PathID", ref epth.name, 100u);
+    ImGui.Text("Point");
+    // create string array of point indices
+    var points = new string[epth.p.Count];
+    for (var i = 0; i < epth.p.Count; i++)
+        points[i] = i.ToString();
+    ImGui.Combo("##Point", ref _epthPoint, points, points.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + ##Point"))
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EPTH");
-        ImGui.Combo("##EPTH", ref _epthIndex, _epthNames, _epthNames.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            map.EPTH.Add(new EPTHc());
-            _epthIndex = map.EPTH.Count - 1;
-        }
+        epth.p.Add(new Vector4());
+        _epthPoint = epth.p.Count - 1;
+    }
 
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.EPTH.Count > 0)
-        {
-            map.EPTH.RemoveAt(_epthIndex);
-            _epthPoint = 0;
-        }
+    ImGui.SameLine();
+    if (ImGui.Button(" - ##Point") && epth.p.Count > 0)
+        epth.p.RemoveAt(_epthPoint);
+    if (_epthPoint >= epth.p.Count)
+        _epthPoint = epth.p.Count - 1;
+    if (epth.p.Count == 0)
+    {
+        ImGui.End();
+        return;
+    }
 
-        if (_epthIndex >= map.EPTH.Count)
-            _epthIndex = map.EPTH.Count - 1;
-        if (map.EPTH.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
+    var point = epth.p[_epthPoint];
+    ImGui.Text("Position");
+    ImGui.InputFloat4("##XYZR", ref point);
+    epth.p[_epthPoint] = point; // can't pass by ref so we must reassign
+    ImGui.End();
+}
 
-        var epth = map.EPTH[_epthIndex];
-        ImGui.Text("Path ID");
-        ImGui.InputText("##PathID", ref epth.name, 100u);
-        ImGui.Text("Point");
-        // create string array of point indices
-        var points = new string[epth.p.Count];
-        for (var i = 0; i < epth.p.Count; i++)
-            points[i] = i.ToString();
-        ImGui.Combo("##Point", ref _epthPoint, points, points.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + ##Point"))
-        {
-            epth.p.Add(new Vector4());
-            _epthPoint = epth.p.Count - 1;
-        }
+private void DrawTrigger()
+{
+    if (_currentFile is not Map map) return;
+    ImGui.Begin("EMTR");
+    ImGui.Combo("##Trigger", ref _triggerIndex, _triggerNames, _triggerNames.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
+    {
+        map.Triggers.Add(new Trigger());
+        _triggerIndex = map.Triggers.Count - 1;
+    }
 
-        ImGui.SameLine();
-        if (ImGui.Button(" - ##Point") && epth.p.Count > 0)
-            epth.p.RemoveAt(_epthPoint);
-        if (_epthPoint >= epth.p.Count)
-            _epthPoint = epth.p.Count - 1;
-        if (epth.p.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && map.Triggers.Count > 0)
+    {
+        map.Triggers.RemoveAt(_triggerIndex);
+        _triggerPoint = 0;
+    }
 
-        var point = epth.p[_epthPoint];
-        ImGui.Text("Position");
-        ImGui.InputFloat4("##XYZR", ref point);
-        epth.p[_epthPoint] = point; // can't pass by ref so we must reassign
+    if (_triggerIndex >= map.Triggers.Count)
+        _triggerIndex = map.Triggers.Count - 1;
+    if (map.Triggers.Count == 0)
+    {
         ImGui.End();
+        return;
     }
 
-    private void DrawTrigger()
+    var trigger = map.Triggers[_triggerIndex];
+    ImGui.Text("Trigger Type");
+    var triggerIndex = trigger.ExTR.type switch
     {
-        if (_currentFile is not Map map) return;
-        ImGui.Begin("EMTR");
-        ImGui.Combo("##Trigger", ref _triggerIndex, _triggerNames, _triggerNames.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
+        "B" => 0,
+        "S" => 1,
+        "T" => 2,
+        _ => -1
+    };
+    if (ImGui.Combo("##TriggerType", ref triggerIndex, _triggerTypes, _triggerTypes.Length))
+        trigger.ExTR.type = triggerIndex switch
         {
-            map.Triggers.Add(new Trigger());
-            _triggerIndex = map.Triggers.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && map.Triggers.Count > 0)
-        {
-            map.Triggers.RemoveAt(_triggerIndex);
-            _triggerPoint = 0;
-        }
-
-        if (_triggerIndex >= map.Triggers.Count)
-            _triggerIndex = map.Triggers.Count - 1;
-        if (map.Triggers.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var trigger = map.Triggers[_triggerIndex];
-        ImGui.Text("Trigger Type");
-        var triggerIndex = trigger.ExTR.type switch
-        {
-            "B" => 0,
-            "S" => 1,
-            "T" => 2,
-            _ => -1
+            0 => "B",
+            1 => "S",
+            2 => "T",
+            _ => throw new ArgumentOutOfRangeException()
         };
-        if (ImGui.Combo("##TriggerType", ref triggerIndex, _triggerTypes, _triggerTypes.Length))
-            trigger.ExTR.type = triggerIndex switch
-            {
-                0 => "B",
-                1 => "S",
-                2 => "T",
-                _ => throw new ArgumentOutOfRangeException()
-            };
-        ImGui.Text("Trigger Value");
-        ImGui.InputText("##TriggerValue", ref trigger.ExTR.s, 100u);
-        // TODO: what is EMTR.n?
-        // create string array of point indices
-        var points = new string[trigger.EMTR.r.Count];
-        for (var i = 0; i < trigger.EMTR.r.Count; i++)
-            points[i] = i.ToString();
-        ImGui.Text("Point");
-        ImGui.Combo("##Point", ref _triggerPoint, points, points.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + ##Point"))
-        {
-            trigger.EMTR.r.Add(new Vector3());
-            _triggerPoint = trigger.EMTR.r.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ##Point") && trigger.EMTR.r.Count > 0)
-            trigger.EMTR.r.RemoveAt(_triggerPoint);
-        if (_triggerPoint >= trigger.EMTR.r.Count)
-            _triggerPoint = trigger.EMTR.r.Count - 1;
-        if (trigger.EMTR.r.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var point = trigger.EMTR.r[_triggerPoint];
-        ImGui.Text("Position");
-        ImGui.InputFloat3("##XYZR", ref point);
-        trigger.EMTR.r[_triggerPoint] = point; // can't pass by ref so we must reassign
-        ImGui.End();
+    ImGui.Text("Trigger Value");
+    ImGui.InputText("##TriggerValue", ref trigger.ExTR.s, 100u);
+    // TODO: what is EMTR.n?
+    // create string array of point indices
+    var points = new string[trigger.EMTR.r.Count];
+    for (var i = 0; i < trigger.EMTR.r.Count; i++)
+        points[i] = i.ToString();
+    ImGui.Text("Point");
+    ImGui.Combo("##Point", ref _triggerPoint, points, points.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + ##Point"))
+    {
+        trigger.EMTR.r.Add(new Vector3());
+        _triggerPoint = trigger.EMTR.r.Count - 1;
     }
 
-    private void Draw2MWT()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ##Point") && trigger.EMTR.r.Count > 0)
+        trigger.EMTR.r.RemoveAt(_triggerPoint);
+    if (_triggerPoint >= trigger.EMTR.r.Count)
+        _triggerPoint = trigger.EMTR.r.Count - 1;
+    if (trigger.EMTR.r.Count == 0)
     {
-        if (_currentFile._2MWT is not _2MWTc)
-        {
-            _currentFile._2MWT = new _2MWTc();
-            return;
-        }
-
-        _2MWTc _2mwt = _currentFile._2MWT;
-        ImGui.Begin("2MWT");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Water Mesh"); // i think?
-        ImGui.InputText("##WaterMesh", ref _2mwt.mpf, 100u);
-        ImGui.Checkbox("Static Water", ref _2mwt.frozen);
-        ImGui.SameLine();
-        ImGui.Checkbox("Dark Water", ref _2mwt.dark);
-        // create string array of location indices
-        var chunks = new string[_2mwt.chunks.Count];
-        for (var i = 0; i < _2mwt.chunks.Count; i++)
-            chunks[i] = i.ToString();
-        ImGui.Text("Water Chunk");
-        ImGui.PushItemWidth(250);
-        ImGui.Combo("##Chunk", ref _2mwtChunk, chunks, chunks.Length);
-        ImGui.PopItemWidth();
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            _2mwt.chunks.Add(new _2MWTChunk());
-            _2mwtChunk = _2mwt.chunks.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && _2mwt.chunks.Count > 0)
-            _2mwt.chunks.RemoveAt(_2mwtChunk);
-        if (_2mwtChunk >= _2mwt.chunks.Count)
-            _2mwtChunk = _2mwt.chunks.Count - 1;
-        if (_2mwt.chunks.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
-
-        var chunk = _2mwt.chunks[_2mwtChunk];
-        ImGui.Text("Water Lightmap");
-        ImGui.InputText("##WaterTexture", ref chunk.tex, 100u);
-        ImGui.Text("Position");
-        ImGui.InputFloat3("##XYZ", ref chunk.loc);
-        ImGui.Text("Lightmap UV");
-        ImGui.InputFloat2("##UV", ref chunk.texloc);
         ImGui.End();
+        return;
     }
 
-    private void DrawEMNP()
-    {
-        if (_currentFile.EMNP is not EMNPc)
-        {
-            _currentFile.EMNP = new EMNPc();
-            return;
-        }
-
-        EMNPc emnp = _currentFile.EMNP;
-        ImGui.Begin("EMNP");
-        // make list of indices
-        var chunks = new string[emnp.chunks.Count];
-        for (var i = 0; i < emnp.chunks.Count; i++)
-            chunks[i] = i.ToString();
-        ImGui.Text("EMNP Chunk");
-        ImGui.Combo("##Chunk", ref _emnpChunk, chunks, chunks.Length);
-        ImGui.SameLine();
-        if (ImGui.Button(" + "))
-        {
-            emnp.chunks.Add(new EMNPChunk());
-            _emnpChunk = emnp.chunks.Count - 1;
-        }
-
-        ImGui.SameLine();
-        if (ImGui.Button(" - ") && emnp.chunks.Count > 0)
-            emnp.chunks.RemoveAt(_emnpChunk);
-        if (_emnpChunk >= emnp.chunks.Count)
-            _emnpChunk = emnp.chunks.Count - 1;
-        if (emnp.chunks.Count == 0)
-        {
-            ImGui.End();
-            return;
-        }
+    var point = trigger.EMTR.r[_triggerPoint];
+    ImGui.Text("Position");
+    ImGui.InputFloat3("##XYZR", ref point);
+    trigger.EMTR.r[_triggerPoint] = point; // can't pass by ref so we must reassign
+    ImGui.End();
+}
 
-        ImGui.PushItemWidth(-1);
-        var chunk = emnp.chunks[_emnpChunk];
-        ImGui.Text("Value 1");
-        var temp1 = (int)chunk.@bool;
-        ImGui.InputInt("##Value1", ref temp1);
-        ImGui.Text("Position");
-        ImGui.InputFloat3("##XYZ", ref chunk.l);
-        ImGui.Text("Value 2");
-        var temp2 = (int)chunk.b1;
-        ImGui.InputInt("##Value2", ref temp2);
-        ImGui.Text("Value 3");
-        var temp3 = (int)chunk.b2;
-        ImGui.InputInt("##Value3", ref temp3);
-        ImGui.Text("Value 4");
-        var temp4 = (int)chunk.b3;
-        ImGui.InputInt("##Value4", ref temp4);
-        ImGui.Text("Value 5");
-        var temp5 = (int)chunk.b4;
-        ImGui.InputInt("##Value5", ref temp5);
-        ImGui.Text("Value 6");
-        var temp6 = (int)chunk.b5;
-        ImGui.InputInt("##Value6", ref temp6);
-        chunk.@bool = (byte)temp1;
-        chunk.b1 = (byte)temp2;
-        chunk.b2 = (byte)temp3;
-        chunk.b3 = (byte)temp4;
-        chunk.b4 = (byte)temp5;
-        chunk.b5 = (byte)temp6;
-        ImGui.PopItemWidth();
-        ImGui.End();
+private void Draw2MWT()
+{
+    if (_currentFile._2MWT is not _2MWTc)
+    {
+        _currentFile._2MWT = new _2MWTc();
+        return;
     }
 
-    private void DrawGOBJ()
+    _2MWTc _2mwt = _currentFile._2MWT;
+    ImGui.Begin("2MWT");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Water Mesh"); // i think?
+    ImGui.InputText("##WaterMesh", ref _2mwt.mpf, 100u);
+    ImGui.Checkbox("Static Water", ref _2mwt.frozen);
+    ImGui.SameLine();
+    ImGui.Checkbox("Dark Water", ref _2mwt.dark);
+    // create string array of location indices
+    var chunks = new string[_2mwt.chunks.Count];
+    for (var i = 0; i < _2mwt.chunks.Count; i++)
+        chunks[i] = i.ToString();
+    ImGui.Text("Water Chunk");
+    ImGui.PushItemWidth(250);
+    ImGui.Combo("##Chunk", ref _2mwtChunk, chunks, chunks.Length);
+    ImGui.PopItemWidth();
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
     {
-        if (_currentFile.GOBJ is not GOBJc gobj) return;
-        ImGui.Begin("GOBJ");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Type");
-        if (ImGui.Combo("##Type", ref gobj.Type, _gobjTypes, _gobjTypes.Length))
-            _extension = _gobjTypes[gobj.Type]; // update the extension (used when saving)
-        ImGui.End();
+        _2mwt.chunks.Add(new _2MWTChunk());
+        _2mwtChunk = _2mwt.chunks.Count - 1;
     }
 
-    private void DrawGIAR()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && _2mwt.chunks.Count > 0)
+        _2mwt.chunks.RemoveAt(_2mwtChunk);
+    if (_2mwtChunk >= _2mwt.chunks.Count)
+        _2mwtChunk = _2mwt.chunks.Count - 1;
+    if (_2mwt.chunks.Count == 0)
     {
-        if (_currentFile.GIAR is not GIARc giar) return;
-        ImGui.Begin("GIAR");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Ballistic Resistance");
-        ImGui.InputInt("##BallisticResistance", ref giar.BallR);
-        ImGui.Text("Bio Resistance");
-        ImGui.InputInt("##BioResistance", ref giar.BioR);
-        ImGui.Text("Electric Resistance");
-        ImGui.InputInt("##ElectricResistance", ref giar.ElecR);
-        ImGui.Text("EMP Resistance");
-        ImGui.InputInt("##EMPResistance", ref giar.EMPR);
-        ImGui.Text("Normal Resistance");
-        ImGui.InputInt("##NormalResistance", ref giar.NormR);
-        ImGui.Text("Heat Resistance");
-        ImGui.InputInt("##HeatResistance", ref giar.HeatR);
         ImGui.End();
+        return;
     }
 
-    private void DrawEMFG()
+    var chunk = _2mwt.chunks[_2mwtChunk];
+    ImGui.Text("Water Lightmap");
+    ImGui.InputText("##WaterTexture", ref chunk.tex, 100u);
+    ImGui.Text("Position");
+    ImGui.InputFloat3("##XYZ", ref chunk.loc);
+    ImGui.Text("Lightmap UV");
+    ImGui.InputFloat2("##UV", ref chunk.texloc);
+    ImGui.End();
+}
+
+private void DrawEMNP()
+{
+    if (_currentFile.EMNP is not EMNPc)
     {
-        if (_currentFile.EMFG is not EMFGc)
-        {
-            _currentFile.EMFG = new EMFGc();
-            return;
-        }
+        _currentFile.EMNP = new EMNPc();
+        return;
+    }
 
-        EMFGc emfg = _currentFile.EMFG;
-        _emfgColor = ColToVec3(emfg.colour);
-        ImGui.Begin("EMFG");
-        ImGui.Checkbox("Enabled", ref emfg.enabled);
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Colour");
-        ImGui.ColorEdit3("##Colour", ref _emfgColor);
-        emfg.colour = Color.FromArgb(255, (int)(_emfgColor.X * 255), (int)(_emfgColor.Y * 255),
-            (int)(_emfgColor.Z * 255));
-        ImGui.Text("Base Height");
-        ImGui.InputFloat("##BaseHeight", ref emfg.base_height);
-        ImGui.Text("Anim1 Speed");
-        ImGui.InputFloat("##Anim1Speed", ref emfg.anim1Speed);
-        ImGui.Text("Anim1 Height");
-        ImGui.InputFloat("##Anim1Height", ref emfg.anim1Height);
-        ImGui.Text("Total Height");
-        ImGui.InputFloat("##TotalHeight", ref emfg.total_height);
-        ImGui.Text("Anim2 Speed");
-        ImGui.InputFloat("##Anim2Speed", ref emfg.anim2Speed);
-        ImGui.Text("Anim2 Height");
-        ImGui.InputFloat("##Anim2Height", ref emfg.anim2Height);
-        ImGui.Text("Vertical Offset");
-        ImGui.InputFloat("##VerticalOffset", ref emfg.verticalOffset);
-        ImGui.Text("Max Fog Density");
-        ImGui.InputFloat("##MaxFogDensity", ref emfg.max_fog_density);
-        ImGui.PopItemWidth();
-        ImGui.End();
+    EMNPc emnp = _currentFile.EMNP;
+    ImGui.Begin("EMNP");
+    // make list of indices
+    var chunks = new string[emnp.chunks.Count];
+    for (var i = 0; i < emnp.chunks.Count; i++)
+        chunks[i] = i.ToString();
+    ImGui.Text("EMNP Chunk");
+    ImGui.Combo("##Chunk", ref _emnpChunk, chunks, chunks.Length);
+    ImGui.SameLine();
+    if (ImGui.Button(" + "))
+    {
+        emnp.chunks.Add(new EMNPChunk());
+        _emnpChunk = emnp.chunks.Count - 1;
     }
 
-    private void DrawGIAM()
+    ImGui.SameLine();
+    if (ImGui.Button(" - ") && emnp.chunks.Count > 0)
+        emnp.chunks.RemoveAt(_emnpChunk);
+    if (_emnpChunk >= emnp.chunks.Count)
+        _emnpChunk = emnp.chunks.Count - 1;
+    if (emnp.chunks.Count == 0)
     {
-        if (_currentFile.GIAM is not GIAMc giam) return;
-        ImGui.Begin("GIAM");
-        ImGui.PushItemWidth(-1);
-        ImGui.Text("Ammo Type");
-        ImGui.Combo("##AmmoType", ref giam.ammoType, _ammoTypes, _ammoTypes.Length);
-        ImGui.Text("Minimum Damage");
-        ImGui.InputInt("##MinDamage", ref giam.minDmg);
-        ImGui.Text("Maximum Damage");
-        ImGui.InputInt("##MaxDamage", ref giam.maxDmg);
-        ImGui.Text("Range Modifier");
-        ImGui.InputInt("##Range", ref giam.unk1);
-        ImGui.Text("Crit Chance");
-        ImGui.InputInt("##CritChance", ref giam.critChance);
-        ImGui.Text("Unknown");
-        ImGui.InputInt("##Unknown", ref giam.engUnk1);
-        ImGui.Text("Unknown");
-        ImGui.InputInt("##Unknown2", ref giam.unk2);
-        ImGui.Text("Bullets Per Shot");
-        ImGui.InputInt("##Unknown3", ref giam.unk3);
-        ImGui.PopItemWidth();
         ImGui.End();
+        return;
     }
 
-    private void DrawGIWP()
+    ImGui.PushItemWidth(-1);
+    var chunk = emnp.chunks[_emnpChunk];
+    ImGui.Text("Value 1");
+    var temp1 = (int)chunk.@bool;
+    ImGui.InputInt("##Value1", ref temp1);
+    ImGui.Text("Position");
+    ImGui.InputFloat3("##XYZ", ref chunk.l);
+    ImGui.Text("Value 2");
+    var temp2 = (int)chunk.b1;
+    ImGui.InputInt("##Value2", ref temp2);
+    ImGui.Text("Value 3");
+    var temp3 = (int)chunk.b2;
+    ImGui.InputInt("##Value3", ref temp3);
+    ImGui.Text("Value 4");
+    var temp4 = (int)chunk.b3;
+    ImGui.InputInt("##Value4", ref temp4);
+    ImGui.Text("Value 5");
+    var temp5 = (int)chunk.b4;
+    ImGui.InputInt("##Value5", ref temp5);
+    ImGui.Text("Value 6");
+    var temp6 = (int)chunk.b5;
+    ImGui.InputInt("##Value6", ref temp6);
+    chunk.@bool = (byte)temp1;
+    chunk.b1 = (byte)temp2;
+    chunk.b2 = (byte)temp3;
+    chunk.b3 = (byte)temp4;
+    chunk.b4 = (byte)temp5;
+    chunk.b5 = (byte)temp6;
+    ImGui.PopItemWidth();
+    ImGui.End();
+}
+
+private void DrawGOBJ()
+{
+    if (_currentFile.GOBJ is not GOBJc gobj) return;
+    ImGui.Begin("GOBJ");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Type");
+    if (ImGui.Combo("##Type", ref gobj.Type, _gobjTypes, _gobjTypes.Length))
+        _extension = _gobjTypes[gobj.Type]; // update the extension (used when saving)
+    ImGui.End();
+}
+
+private void DrawGIAR()
+{
+    if (_currentFile.GIAR is not GIARc giar) return;
+    ImGui.Begin("GIAR");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Ballistic Resistance");
+    ImGui.InputInt("##BallisticResistance", ref giar.BallR);
+    ImGui.Text("Bio Resistance");
+    ImGui.InputInt("##BioResistance", ref giar.BioR);
+    ImGui.Text("Electric Resistance");
+    ImGui.InputInt("##ElectricResistance", ref giar.ElecR);
+    ImGui.Text("EMP Resistance");
+    ImGui.InputInt("##EMPResistance", ref giar.EMPR);
+    ImGui.Text("Normal Resistance");
+    ImGui.InputInt("##NormalResistance", ref giar.NormR);
+    ImGui.Text("Heat Resistance");
+    ImGui.InputInt("##HeatResistance", ref giar.HeatR);
+    ImGui.End();
+}
+
+private void DrawEMFG()
+{
+    if (_currentFile.EMFG is not EMFGc)
     {
-        ImGui.Begin("GIWP");
-        ImGui.Text("GIWP not implemented yet.");
-        ImGui.End();
+        _currentFile.EMFG = new EMFGc();
+        return;
     }
+
+    EMFGc emfg = _currentFile.EMFG;
+    _emfgColor = ColToVec3(emfg.colour);
+    ImGui.Begin("EMFG");
+    ImGui.Checkbox("Enabled", ref emfg.enabled);
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Colour");
+    ImGui.ColorEdit3("##Colour", ref _emfgColor);
+    emfg.colour = Color.FromArgb(255, (int)(_emfgColor.X * 255), (int)(_emfgColor.Y * 255),
+        (int)(_emfgColor.Z * 255));
+    ImGui.Text("Base Height");
+    ImGui.InputFloat("##BaseHeight", ref emfg.base_height);
+    ImGui.Text("Anim1 Speed");
+    ImGui.InputFloat("##Anim1Speed", ref emfg.anim1Speed);
+    ImGui.Text("Anim1 Height");
+    ImGui.InputFloat("##Anim1Height", ref emfg.anim1Height);
+    ImGui.Text("Total Height");
+    ImGui.InputFloat("##TotalHeight", ref emfg.total_height);
+    ImGui.Text("Anim2 Speed");
+    ImGui.InputFloat("##Anim2Speed", ref emfg.anim2Speed);
+    ImGui.Text("Anim2 Height");
+    ImGui.InputFloat("##Anim2Height", ref emfg.anim2Height);
+    ImGui.Text("Vertical Offset");
+    ImGui.InputFloat("##VerticalOffset", ref emfg.verticalOffset);
+    ImGui.Text("Max Fog Density");
+    ImGui.InputFloat("##MaxFogDensity", ref emfg.max_fog_density);
+    ImGui.PopItemWidth();
+    ImGui.End();
+}
+
+private void DrawGIAM()
+{
+    if (_currentFile.GIAM is not GIAMc giam) return;
+    ImGui.Begin("GIAM");
+    ImGui.PushItemWidth(-1);
+    ImGui.Text("Ammo Type");
+    ImGui.Combo("##AmmoType", ref giam.ammoType, _ammoTypes, _ammoTypes.Length);
+    ImGui.Text("Minimum Damage");
+    ImGui.InputInt("##MinDamage", ref giam.minDmg);
+    ImGui.Text("Maximum Damage");
+    ImGui.InputInt("##MaxDamage", ref giam.maxDmg);
+    ImGui.Text("Range Modifier");
+    ImGui.InputInt("##Range", ref giam.unk1);
+    ImGui.Text("Crit Chance");
+    ImGui.InputInt("##CritChance", ref giam.critChance);
+    ImGui.Text("Unknown");
+    ImGui.InputInt("##Unknown", ref giam.engUnk1);
+    ImGui.Text("Unknown");
+    ImGui.InputInt("##Unknown2", ref giam.unk2);
+    ImGui.Text("Bullets Per Shot");
+    ImGui.InputInt("##Unknown3", ref giam.unk3);
+    ImGui.PopItemWidth();
+    ImGui.End();
+}
+
+private void DrawGIWP()
+{
+    ImGui.Begin("GIWP");
+    ImGui.Text("GIWP not implemented yet.");
+    ImGui.End();
+}
 }
\ No newline at end of file