Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

更新4.3.4后meilin clash节点测速都是超时,关闭运行策略路由恢复正常,回退到4.3.0正常 #48

Open
RealzQAQ opened this issue Dec 7, 2023 · 3 comments

Comments

@RealzQAQ
Copy link

RealzQAQ commented Dec 7, 2023

更新4.3.4后meilin clash节点测速都是超时,关闭运行策略路由恢复正常,回退到4.3.0正常

@larsonzh
Copy link
Owner

larsonzh commented Dec 7, 2023

更新4.3.4后meilin clash节点测速都是超时,关闭运行策略路由恢复正常,回退到4.3.0正常

没接触过该软件,可能与该软件中的节点线路出口与策略路由设置冲突有关,策略路由中缺省走第一WAN口,可酌情调整。也可调整一下策略路由「高级」页面中的「远程访问及本机应用访问外网静态直通策略」或「代理转发静态直通策略」设置,使之与所用软件中的设置一致。设置方法参见上述功能的使用帮助。

@RealzQAQ
Copy link
Author

RealzQAQ commented Dec 7, 2023

确实是有冲突,「远程访问及本机应用访问外网静态直通策略」设置为第二WAN正常,感谢回复!手动点赞!!

@larsonzh
Copy link
Owner

larsonzh commented Dec 7, 2023

确实是有冲突,「远程访问及本机应用访问外网静态直通策略」设置为第二WAN正常,感谢回复!手动点赞!!

需要注意的是,「远程访问及本机应用访问外网静态直通策略」设置为第二WAN时,如果有远程访问第一WAN口,DDNS走第一WAN口,或远程通过第一WAN口访问本地NAS、路由器内置VPN服务器的需求时,这些访问可能会失败。

最好的方式是启用「代理转发静态直通策略」,将节点地址填入「远程节点服务器地址列表」,并设置为走第二WAN口,可避免出现上述远程访问路由器失败的情况。

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants