Failed to set beacon parameters / IEEE 802.11: disassociated

[shasse-NimGuy]

hello i have a persisting issue that everytime i start hostapd it seems to try then says Filed to set beacon parameters.
interface=wlo1
driver=nl80211
ssid=test
bssid=00:00:00:03:00:11
channel=11
hw_mode=g

Result of "sudo lshw -C network"

*-network
description: Wireless interface
product: Ice Lake-LP PCH CNVi WiFi
vendor: Intel Corporation
physical id: 14.3
bus info: pci@0000:00:14.3
logical name: wlo1
version: 30
serial: 00:00:00:03:00:11
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=5.15.0-130-generic firmware=66.f1c864e0.0 Qu-c0-hr-b0-66.uc ip=10.0.0.82 latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: iomemory:600-5ff irq:16 memory:6005114000-6005117fff
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:06:00.0
logical name: eno1
version: 15
serial: b0:5c:da:42:80:18
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.15.0-130-generic firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=twisted pair
resources: irq:17 ioport:5000(size=256) memory:53004000-53004fff memory:53000000-53003fff

Error:
wlo1: interface state UNINITIALIZED->ENABLED
wlo1: AP-ENABLED
wlo1: STA 5c:8f:e0:cd:8a:1f IEEE 802.11: disassociated
wlo1: INTERFACE-DISABLED
wlo1: INTERFACE-ENABLED
Failed to set beacon parameters