This is a simple acrylic lasercut case for the Raspberry Pi Model B+, 2 B and 3 B.
green: vector engraving
black: raster engraving
red: cut
Detailed instructions coming soon.™
- 3mm acryl
- 4x M2.5 10mm screws
- 4x M2.5 screw nuts
raspberrypi-b-plus-case by https://github.com/diy-electronics/raspberrypi-b-plus-case is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Raspberry Pi is a trademark of the Raspberry Pi Foundation
Based on the Adafruit Pi Box - Enclosure for Raspberry Pi Model A or B