diff --git a/_partials/cli_tools.md b/_partials/cli_tools.md index 67e149ce..0fb198f2 100644 --- a/_partials/cli_tools.md +++ b/_partials/cli_tools.md @@ -1,5 +1,35 @@ ## Command line tools +### Check the locale + +The locale is a mechanism allowing to customize programs to your language and country. + +Let's verify that the default locale is set to English, please type this in the Ubuntu terminal: + +```bash +locale +``` + +If the output does not contain `LANG=en_US.UTF-8`, run the following command in a Ubuntu terminal to install the english locale: + +```bash +sudo locale-gen en_US.UTF-8 +``` + +If after, you receive a warning (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) in your terminal, please do the following: + +
+ Generate locale + +Please, run this lines in your terminal. + +```bash +sudo update-locale LANG=en_US.UTF8 +sudo apt-get update +sudo apt-get install language-pack-en language-pack-en-base manpages +``` +
+ ### Zsh & Git Instead of using the default `bash` [shell](https://en.wikipedia.org/wiki/Shell_(computing)), we will use `zsh`. diff --git a/_partials/es/cli_tools.md b/_partials/es/cli_tools.md index 2544dcf5..7808ca7b 100644 --- a/_partials/es/cli_tools.md +++ b/_partials/es/cli_tools.md @@ -1,5 +1,35 @@ ## Herramientas de línea de comando +### Comprueba la configuración regional (locale) + +La "locale" es un mecanismo que permite adaptar los programas a su idioma y país. + +Comprobemos que la configuración regional por defecto es el inglés: + +```bash +locale +``` + +Si la salida no contiene `LANG=en_US.UTF-8`, ejecute el siguiente comando en un Ubuntu terminal para instalar la locale inglesa: + +```bash +sudo locale-gen en_US.UTF-8 +``` + +Si después, recibes una advertencia (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) en tu terminal, por favor haz lo siguiente: + +
+ Generar la configuración regional<>/summary> + +Por favor, ejecuta estas líneas en tu terminal. + +```bash +sudo update-locale LANG=en_US.UTF8 +sudo apt-get update +sudo apt-get install language-pack-en language-pack-en-base manpages +``` +
+ ### Zsh & Git En lugar de usar el `bash` [shell](https://en.wikipedia.org/wiki/Shell_(computing)) predeterminado, usaremos `zsh`. diff --git a/_partials/es/windows_ubuntu.md b/_partials/es/windows_ubuntu.md index 2981b48a..22d77bff 100644 --- a/_partials/es/windows_ubuntu.md +++ b/_partials/es/windows_ubuntu.md @@ -110,33 +110,3 @@ whoami Debería devolver el nombre de usuario que elegiste anteriormente. :x: Si dice `root`, **contacta a un profesor** antes de continuar. - -### Comprueba la configuración regional (locale) - -La "locale" es un mecanismo que permite adaptar los programas a su idioma y país. - -Comprobemos que la configuración regional por defecto es el inglés: - -```bash -locale -``` - -Si la salida no contiene `LANG=en_US.UTF-8`, ejecute el siguiente comando en un Ubuntu terminal para instalar la locale inglesa: - -```bash -sudo locale-gen en_US.UTF-8 -``` - -Si después, recibes una advertencia (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) en tu terminal, por favor haz lo siguiente: - -
- Generar la configuración regional<>/summary> - -Por favor, ejecuta estas líneas en tu terminal. - -```bash -sudo update-locale LANG=en_US.UTF8 -sudo apt-get update -sudo apt-get install language-pack-en language-pack-en-base manpages -``` -
diff --git a/_partials/fr/cli_tools.md b/_partials/fr/cli_tools.md index 18b15ab2..1fbb3d2b 100644 --- a/_partials/fr/cli_tools.md +++ b/_partials/fr/cli_tools.md @@ -1,5 +1,35 @@ ## Outils en ligne de commande +### Vérifier la locale + +Le concept de "locale" permet de personnaliser les programms en fonction de ta langue et ton pays. + +Vérifions que la locale est bien en **anglais** dans le terminal : + +```bash +locale +``` + +Si la commande ne renvoie pas quelque chose qui contient `LANG=en_US.UTF-8`, lance ceci dans un terminal Ubuntu : + +```bash +sudo locale-gen en_US.UTF-8 +``` + +Si après, tu reçois un avertissement (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) dans ton terminal, veuillez faire ce qui suit : + +
+ Générer la localisation + +Veuillez exécuter ces lignes dans ton terminal. + +```bash +sudo update-locale LANG=en_US.UTF8 +sudo apt-get update +sudo apt-get install language-pack-en language-pack-en-base manpages +``` +
+ ### Zsh & Git Au lieu d’utiliser le [shell](https://fr.wikipedia.org/wiki/Interface_syst%C3%A8me) `bash` par défaut, nous utiliserons `zsh`. diff --git a/_partials/fr/windows_ubuntu.md b/_partials/fr/windows_ubuntu.md index c11112a0..00ee9ec4 100644 --- a/_partials/fr/windows_ubuntu.md +++ b/_partials/fr/windows_ubuntu.md @@ -111,34 +111,3 @@ whoami Cela devrait renvoyer le nom d'utilisateur que tu as choisi précédemment. :x: Si cela affiche `root`, **contacte un TA** avant de continuer ! - - -### Vérifier la locale - -Le concept e "locale" permert de personnaliser les programms en fonction de ta langue et ton pays. - -Vérifions que la locale est bien en **anglais** dans le terminal : - -```bash -locale -``` - -Si la commande ne renvoie pas quelque chose qui contient `LANG=en_US.UTF-8`, lance ceci dans un terminal Ubuntu : - -```bash -sudo locale-gen en_US.UTF-8 -``` - -Si après, tu reçois un avertissement (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) dans ton terminal, veuillez faire ce qui suit : - -
- Générer la localisation - -Veuillez exécuter ces lignes dans ton terminal. - -```bash -sudo update-locale LANG=en_US.UTF8 -sudo apt-get update -sudo apt-get install language-pack-en language-pack-en-base manpages -``` -
diff --git a/_partials/pt/cli_tools.md b/_partials/pt/cli_tools.md index 6055f814..a4cffe91 100644 --- a/_partials/pt/cli_tools.md +++ b/_partials/pt/cli_tools.md @@ -1,5 +1,35 @@ ## Ferramentas de linha de comando +### Verifique a localidade + +A localidade é um mecanismo que permite personalizar programas de acordo com seu idioma e país. + +Vamos verificar se a localidade padrão está definida como inglês, digite isto no terminal do Ubuntu: + +```bash +locale +``` + +Se a saída não contiver `LANG=en_US.UTF-8`, execute o seguinte comando em um terminal Ubuntu para instalar a localidade em inglês: + +```bash +sudo locale-gen en_US.UTF-8 +``` + +Se, depois, receberes um aviso (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) no teu terminal, por favor faz o seguinte: + +
+ Gerar localidade + +Por favor, executa estas linhas no teu terminal. + +```bash +sudo update-locale LANG=en_US.UTF8 +sudo apt-get update +sudo apt-get install language-pack-en language-pack-en-base manpages +``` +
+ ### Zsh e Git Em vez de usar o `bash` [shell](https://en.wikipedia.org/wiki/Shell_(computing)), usaremos `zsh`. diff --git a/_partials/pt/windows_ubuntu.md b/_partials/pt/windows_ubuntu.md index 0b8955f4..cb9e6854 100644 --- a/_partials/pt/windows_ubuntu.md +++ b/_partials/pt/windows_ubuntu.md @@ -110,34 +110,3 @@ whoami It should return the username you chose before. :x: It if says `root`, **contact a TA** before continuing! - - -### Verifique a localidade - -A localidade é um mecanismo que permite personalizar programas de acordo com seu idioma e país. - -Vamos verificar se a localidade padrão está definida como inglês, digite isto no terminal do Ubuntu: - -```bash -locale -``` - -Se a saída não contiver `LANG=en_US.UTF-8`, execute o seguinte comando em um terminal Ubuntu para instalar a localidade em inglês: - -```bash -sudo locale-gen en_US.UTF-8 -``` - -Se, depois, receberes um aviso (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) no teu terminal, por favor faz o seguinte: - -
- Gerar localidade - -Por favor, executa estas linhas no teu terminal. - -```bash -sudo update-locale LANG=en_US.UTF8 -sudo apt-get update -sudo apt-get install language-pack-en language-pack-en-base manpages -``` -
diff --git a/_partials/windows_ubuntu.md b/_partials/windows_ubuntu.md index 3473bd62..5d5326a2 100644 --- a/_partials/windows_ubuntu.md +++ b/_partials/windows_ubuntu.md @@ -111,33 +111,3 @@ whoami It should return the username you chose before. :x: It if says `root`, **contact a TA** before continuing! - -### Check the locale - -The locale is a mechanism allowing to customize programs to your language and country. - -Let's verify that the default locale is set to English, please type this in the Ubuntu terminal: - -```bash -locale -``` - -If the output does not contain `LANG=en_US.UTF-8`, run the following command in a Ubuntu terminal to install the english locale: - -```bash -sudo locale-gen en_US.UTF-8 -``` - -If after, you receive a warning (`bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf-8)`) in your terminal, please do the following: - -
- Generate locale - -Please, run this lines in your terminal. - -```bash -sudo update-locale LANG=en_US.UTF8 -sudo apt-get update -sudo apt-get install language-pack-en language-pack-en-base manpages -``` -