You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hi and Thanks! The Autoconfig works great for the Neo M8N - I couldn't get the switch to UBX working myself. For actual reading, I use https://github.com/bolderflight/UBLOX, though simply for convenience and because I'm fine with 1Hz updates.
{0xF0, 0x0A}, // DTM - Datum Reference
{0xF0, 0x09}, // GBS - GNSS Satellite Fault Detection
{0xF0, 0x00}, // GGA - Global positioning system fix data
{0xF0, 0x01}, // GLL - Latitude and longitude, with time of position fix and status
{0xF0, 0x0D}, // GNS - GNSS fix data
{0xF0, 0x06}, // GRS - GNSS Range Residuals
{0xF0, 0x02}, // GSA - GNSS DOP and Active Satellites
{0xF0, 0x07}, // GST - GNSS Pseudo Range Error Statistics
{0xF0, 0x03}, // GSV - GNSS Satellites in View
{0xF0, 0x04}, // RMC - Recommended Minimum data
{0xF0, 0x0E}, // ???
{0xF0, 0x0F}, // VLW - Dual ground/water distance
{0xF0, 0x05}, // VTG - Course over ground and Ground speed
{0xF0, 0x08}, // ZDA - Time and Date
{0xF1, 0x00}, // POSITION - Lat/Long Position Data
{0xF1, 0x01}, // ???
{0xF1, 0x03}, // SVSTATUS - Satellite Status
{0xF1, 0x04}, // TIME - Time of Day and Clock Information
{0xF1, 0x05}, // ???
{0xF1, 0x06}, // ???
That's all - thanks again!
The text was updated successfully, but these errors were encountered:
Hi and Thanks! The Autoconfig works great for the Neo M8N - I couldn't get the switch to UBX working myself. For actual reading, I use https://github.com/bolderflight/UBLOX, though simply for convenience and because I'm fine with 1Hz updates.
About the autoconfig:
UbxGps/extras/Configuration/Auto-configuration-Mega/Auto-configuration-Mega.ino
Line 145 in ffd0132
I figured I'd document the messages you're enabling after switching to UBX. Maybe the spec I used is faulty and that may be the reason why I couldn't get it to work - couldn't find all the messages either. I used this: https://www.u-blox.com/sites/default/files/products/documents/u-blox8-M8_ReceiverDescrProtSpec_%28UBX-13003221%29_Public.pdf
That's all - thanks again!
The text was updated successfully, but these errors were encountered: