Skip to content

Latest commit

 

History

History
1693 lines (1181 loc) · 62.9 KB

nw.md

File metadata and controls

1693 lines (1181 loc) · 62.9 KB

local nw = require'nw'

Cross-platform library for accessing windows, graphics and input in a consistent manner across Windows, Linux and OS X. Supports transparent windows, bgra8 bitmaps everywhere, drawing via [cairo] and [opengl], edge snapping, fullscreen mode, multiple displays, hi-dpi, key mappings, triple-click events, timers, cursors, native menus, notification icons, all text in utf8, and more.

Status

See issues and milestones.

Backends

API Library Developed & Tested On Probably Runs On


WinAPI [winapi] Windows 7 x64 Windows XP/2000 Cocoa [objc] OSX 10.12 OSX 10.9 Xlib [xlib] Ubuntu/Unity 18.04 x64 Ubuntu/Unity 10.04

Example

local nw = require'nw'

local app = nw:app()        --get the app singleton

local win = app:window{     --create a new window
	w = 400, h = 200,        --specify window's frame size
	title = 'hello',         --specify window's title
	visible = false,         --don't show it yet
}

function win:click(button, count) --this is one way to bind events
	if button == 'left' and count == 3 then --triple click
		app:quit()
	end
end

--this is another way to bind events which allows setting multiple
--handlers for the same event type.
win:on('keydown', function(self, key)
	if key == 'F11' then
		self:fullscreen(not self:fullscreen()) --toggle fullscreen state
	end
end)

function win:repaint()        --called when window needs repainting
	local bmp = win:bitmap()   --get the window's bitmap
	local cr = bmp:cairo()     --get a cairo drawing context
	cr:rgb(0, 1, 0)            --make it green
	cr:paint()
end

win:show() --show it now that it was properly set up

app:run()  --start the event loop

API

NOTE: In the table below, foo(t|f) /-> t|f is a shortcut for saying that foo(t|f) sets the value of foo and foo() -> t|f gets it. t|f means true|false.


the app object nw:app() -> app the global application object the app loop app:run() start the loop app:stop() stop the loop app:running() -> t|f check if the loop is running app:poll([timeout]) -> t|f process the next pending event (return true if there was one) app:maxfps(fps) -> fps cap the window repaint rate quitting app:quit() quit the app, i.e. close all windows and stop the loop app:autoquit(t|f) /-> t|f quit the app when the last visible window is closed (true) app:quitting() -> [false] event: quitting (return false to refuse) win:autoquit(t|f) /-> t|f quit the app when the window is closed (false) timers app:runevery(seconds, func) run a function on a timer (return false to stop it) app:runafter(seconds, func) run a function on a timer once app:run(func) run a function on a zero-second timer once app:sleep(seconds) sleep without blocking an app:run() function window tracking app:windows(['#',][filter]) -> {win1, ...} all windows in creation order app:window_created(win) event: a window was created app:window_closed(win) event: a window was closed window creation app:window(t|cw,ch,[title],[vis]) -> win create a window window closing win:close([reason|force]) close the window and hide it or destroy it win:free([force]) close the window and destroy it win:hideonclose(t|f) /-> t|f hide on close or destroy on close win:dead() -> t|f check if the window was destroyed win:closing(reason, [closing_win]) event: closing (return false to refuse) win:closed() event: window is about to be destroyed win:closeable() -> t|f closeable flag window & app activation app/win:active() -> t|f check if app/window is active app:activate([mode]) activate the app app:active_window() -> win the active window, if any win:activate() activate the window win:activable() -> t|f activable flag app/win:activated() event: app/window was activated app/win:deactivated() event: app/window was deactivated app instances app:check_single_instance() single app instance check app.id set an app ID app:already_running() -> t|f check if other app instances running app:wakeup_other_instances() send wakeup event to other app instances app:wakeup() event: wakeup from another instance app visibility (OSX) app:visible(t|f) /-> t|f get/set app visibility app:hide() hide the app app:unhide() unhide the app app:hidden() event: app was hidden app:unhidden() event: app was unhidden window state win:visible(t|f) /-> t|f get/set window visibility win:show() show window (in its previous state) win:hide() hide window win:shown() event: window was shown win:hidden() event: window was hidden win:minimizable() -> t|f minimizable flag win:isminimized() -> t|f check if the window is minimized win:minimize() minimize the window win:minimized() event: window was minimized win:unminimized() event: window was unminimized win:maximizable() -> t|f maximizable flag win:ismaximized() -> t|f check if the window is maximized win:maximize() maximize the window win:maximized() event: window was maximized win:unmaximized() event: window was unmaximized win:fullscreenable() -> t|f fullscreenable flag win:fullscreen(t|f) /-> t|f get/enter/exit fullscreen mode win:entered_fullscreen() event: entered fullscreen mode win:exited_fullscreen() event: exited fullscreen mode win:restore() restore from minimized or maximized state win:shownormal() show in normal state win:showmodal() show as modal window win:changed(old_state, new_state) event: window state changed app:changed(old_state, new_state) event: app state changed win:enabled(t|f) /-> t|f get/set window enabled flag frame extents app:frame_extents(...) -> ... frame extents for a frame type app:client_to_frame(...) -> ... client rect -> window frame rect conversion app:frame_to_client(...) -> ... window frame rect -> client rect conversion size and position win:client_rect(x,y,w,h) /-> x,y,w,h get/set client rect win:frame_rect(x,y,w,h) /-> x,y,w,h get/set frame rect win:client_size(cw, ch) /-> cw, ch get/set client rect size win/view:to_screen(x, y) -> x, y client space -> screen space conversion win/view:to_client(x, y) -> x, y screen space -> client space conversion win:normal_frame_rect() -> x,y,w,h get frame rect in normal state win:sizing(when, how, rect) event: window size/position is about to change win:frame_rect_changed(x, y, w, h, ...) event: window frame was moved and/or resized win:frame_moved(x, y, oldx, oldy) event: window frame was moved win:frame_resized(w, h, oldw, oldh) event: window frame was resized win:client_rect_changed(cx,cy,cw,ch,...) event: window client area was moved and/or resized win:client_moved(cx, cy, oldcx, oldcy) event: window client area was moved win:client_resized(cw, ch, oldcw, oldch) event: window client area was resized win:hittest(x, y) -> where event: hit test for frameless windows size constraints win:resizeable() -> t|f resizeable flag win:minsize(cw, ch) /-> cw, ch get/set min client rect size win:maxsize(cw, ch) /-> cw, ch get/set max client rect size window edge snapping win:edgesnapping(mode) /-> mode get/set edge snapping mode win:magnets(which) -> {r1, ...} event: get edge snapping rectangles window z-order win:topmost(t|f) /-> t|f get/set the topmost flag win:raise([rel_to_win]) raise above all windows/specific window win:lower([rel_to_win]) lower below all windows/specific window window title win:title(title) /-> title get/set title displays app:displays() -> {disp1, ...} get displays (in no specific order) app:main_display() -> disp the display whose screen rect starts at (0,0) app:active_display() -> disp the display which contains the active window disp:screen_rect() -> x, y, w, h display's screen rectangle disp.x, disp.y, disp.w, disp.h disp:desktop_rect() -> cx, cy, cw, ch display's screen rectangle minus the taskbar disp.cx, disp.cy, disp.cw, disp.ch app:displays_changed() event: displays changed win:display() -> disp|nil the display the window is on cursors win:cursor(name|t|f) /-> name, t|f get/set the mouse cursor and visibility app:caret_blink_time() -> time | 1/0 caret blink time frame flags win:frame() -> frame window's frame: 'normal', 'none', 'toolbox' win:transparent() -> t|f transparent flag win:corner_radius() -> n rounded corners (0) child windows win:parent() -> win|nil window's parent win:children() -> {win1, ...} child windows win:sticky() -> t|f sticky flag hi-dpi support app:autoscaling(t|f) /-> t|f get/enable/disable autoscaling disp.scalingfactor display's scaling factor win:scalingfactor_changed() event: a window's display scaling factor changed views win:views() -> {view1, ...} list views win:view(t) -> view create a view view:free() destroy the view view:dead() -> t|f check if the view was freed view:visible(t|f) /-> t|f get/set view's visibility view:show() show the view view:hide() hide the view view:rect(x, y, w, h) /-> x, y, w, h get/set view's position (in window's client space) and size view:size(w, h) /-> w, h get/set view's size view:anchors(anchors) /-> anchors get/set anchors view:rect_changed(x, y, w, h) event: view's size and/or position changed view:moved(x, y, oldx, oldy) event: view was moved view:resized(w, h, oldw, oldh) event: view was resized keyboard app:key(query) -> t|f get key pressed and toggle states win:keydown(key) event: a key was pressed win:keyup(key) event: a key was depressed win:keypress(key) event: sent after each keydown, including repeats win:keychar(s) event: input char pressed; s is utf-8 mouse app:mouse(var) -> val mouse state: x, y, pos win/view:mouse(var) -> val mouse state: x, y, pos, inside, left, right, middle, x1, x2 win/view:mouseenter(x, y) event: mouse entered the client area of the window win/view:mouseleave() event: mouse left the client area of the window win/view:mousemove(x, y) event: mouse was moved win/view:mousedown(button, x, y, count) event: mouse button was pressed win/view:mouseup(button, x, y, count) event: mouse button was depressed win/view:click(button, count, x, y) event: mouse button was clicked win/view:mousewheel(delta, x, y, pdelta) event: mouse wheel was moved win/view:hmousewheel(delta, x, y, pdelta) event: mouse horizontal wheel was moved app:double_click_time() -> time double click time app:double_click_target_area() -> w, h double click target area rendering win/view:repaint() event: needs repainting win/view:sync() event: needs sync'ing win/view:invalidate([invalid_clock]) request sync'ing and repainting win/view:validate([at_clock]) request sync'ing if invalid win/view:invalid([at_clock]) -> t|f check if invalidated win/view:bitmap() -> bmp get a bgra8 [bitmap] object to draw on bmp:clear() fill the bitmap with zero bytes bmp:cairo() -> cr get a cairo context on the bitmap win/view:free_cairo(cr) event: cairo context needs freeing win/view:free_bitmap(bmp) event: bitmap needs freeing win/view:gl() -> gl get an OpenGL context to draw with menus app:menu() -> menu create a menu (or menu bar) app:menubar() -> menu get app's menu bar (OSX) win:menubar(menu|nil) /-> menu|nil get/set/remove window's menu bar (Windows, Linux) win/view:popup(menu, cx, cy) pop up a menu relative to a window or view menu:popup(win/view, cx, cy) pop up a menu relative to a window or view menu:add(...) menu:set(...) menu:remove(index) menu:get(index) -> item get the menu item at index menu:get(index, prop) -> val get the value of a property of the menu item at index menu:items([prop]) -> {item1, ...} menu:checked(index, t|f) /-> t|f get/set a menu item's checked state icons (common API) icon:free() icon:bitmap() -> bmp get a bgra8 [bitmap] object icon:invalidate() request repainting icon:repaint() event: bitmap needs redrawing icon:free_bitmap(bmp) event: bitmap needs freeing notification icons app:notifyicon(t) -> icon app:notifyicons() -> {icon1, ...} list notification icons icon:tooltip(s) /-> s get/set icon's tooltip icon:menu(menu) /-> menu get/set icon's menu icon:text(s) /-> s get/set text (OSX) icon:length(n) /-> n get/set length (OSX) window icon (Windows) win:icon([which]) -> icon window's icon ('big'); which can be: 'big', 'small' dock icon (OSX) app:dockicon() -> icon file choose dialogs app:opendialog(t) -> path|{path1,...}|nil open a standard "open file" dialog app:savedialog(t) -> path|nil open a standard "save file" dialog clipboard app:getclipboard(format) -> data|nil get data in clipboard (format is 'text', 'files', 'bitmap') app:getclipboard() -> formats get data formats in clipboard app:setclipboard(f|data[, format]) clear or set clipboard drag & drop win/view:dropfiles(x, y, files) event: files are dropped win/view:dragging('enter',t,x,y) -> s event: mouse enter with payload win/view:dragging('hover',t,x,y) -> s event: mouse move with payload win/view:dragging('drop',t,x,y) event: dropped the payload win/view:dragging('leave') event: mouse left with payload tooltips win:tooltip(text|f) -> text|f get/set/hide tooltip text events app/win/view:on(event, func) call func when event happens app/win/view:off(event) remove event handlers app/win/view:fire(event, args...) -> ret fire an event app/win/view:events(enabled) -> prev_state enable/disable events app/win/view:event(name, args...) meta-event fired on every other event version checks app:ver(query) -> t|f check OS minimum version (eg. 'OSX 10.8') extending nw.backends -> {os -> module_name} default backend modules for each OS nw:init([backend_name]) init with a specific backend (can be called only once)


The app object

The global app object is the API from which everything else gets created.

nw:app() -> app

Get the global application object.

This calls nw:init() which initializes the library with the default backend for the current platform.

The app loop

app:run()

Start the application main loop.

Calling run() when the loop is already running does nothing.

app:stop()

Stop the loop.

Calling stop() when the loop is not running does nothing.

app:running() -> t|f

Check if the loop is running.

app:poll([timeout]) -> t|f

Process the next pending event from the event queue. Returns true if there was an event to process, false if there wasn't. Returns false, exit_code if the application was asked to quit. timeout (default=0) specifies a maximum wait time for an event to appear.

app:maxfps(fps)
app:maxfps() -> fps

Get/set the maximum window repaint rate (frames per second). 1/0 disables the throttling. The default is 60. Note that you still need to call invalidate() in order to trigger a repaint.

Quitting

app:quit()

Quit the app, i.e. close all windows and stop the loop.

Quitting is a multi-phase process:

  1. app:quitting() event is fired. If it returns false, quitting is aborted.
  2. win:closing('quit', closing_win) event is fired on all non-child windows, with the initial window as arg#2. If any of them returns false, quitting is aborted.
  3. win:free'force' is called on all windows (in reverse-creation order).
  4. the app loop is stopped.

Calling quit() when the loop is not running or while quitting is in progress does nothing.

app:autoquit() -> t|f
app:autoquit(t|f)

Get/set the app autoquit flag (default: true). When this flag is true, the app loop exists when the last visible non-child window is closed.

app:quitting() -> [false]

Event: the app wants to quit, but nothing was done to that effect. Return false from this event to cancel the process.

win:autoquit() -> t|f
win:autoquit(t|f)

Get/set the window autoquit flag (default: false). When this flag is true, the app loop exists when the window is closed. This flag can be used on the app's main window if there is such a thing.

Timers

app:runevery(seconds, func)

Run a function on a recurrent timer. The timer can be stopped by returning false from the function.

app:runafter(seconds, func)

Run a function on a timer once.

app:run(func)

Run a function on a zero-second timer, once, inside a coroutine. This allows calling app:sleep() inside the function (see below).

If the loop is not already started, it is started and then stopped after the function finishes.

app:sleep(seconds)

Sleep without blocking from inside a function that was run via app:run(). While the function is sleeping, other timers and events continue to be processed.

This is poor man's multi-threading based on timers and coroutines. It can be used to create complex temporal sequences withoug having to chain timer callbacks.

Calling sleep() outside an app:run() function raises an error.

Window tracking

app:windows([filter]) -> {win1, ...}
app:windows('#'[, filter]) -> n

Get all windows in creation order. If '#' is given, get the number of windows (dead or alive) instead. An optional filter(self, win) -> false function can be used to filter the results in both cases.

app:window_created(win)

Event: a window was created.

app:window_closed(win)

Event: a window was closed.

Creating windows

app:window(t) -> win
app:window(cw, ch, [title], [visible]) -> win

Create a window (fields of t below with default value in parenthesis):

  • position
    • x, y - frame position
    • w, h - frame size
    • cx, cy - client area position
    • cw, ch - client area size
    • min_cw, min_ch - min client rect size (1, 1)
    • max_cw, max_ch - max client rect size
  • state
    • visible - start visible (true)
    • minimized - start minimized (false)
    • maximized - start maximized (false)
    • enabled - start enabled (true)
  • frame
    • frame - frame type: 'normal', 'none', 'toolbox' ('normal')
    • title - title ('')
    • transparent - transparent window (false)
    • corner_radius - rounded corners (0)
  • behavior
    • parent - parent window
    • sticky - moves with parent (false)
    • topmost - stays on top of other non-topmost windows (false)
    • minimizable - allow minimization (true)
    • maximizable - allow maximization (true; false if resizeable is false)
    • closeable - allow closing (true)
    • resizeable - allow resizing (true)
    • fullscreenable - allow fullscreen mode (true; false if resizeable is false)
    • activable - allow activation (true)
    • autoquit - quit the app on closing (false)
    • hideonclose - hide on close instead of destroying (true)
    • edgesnapping - magnetized edges ('screen')
  • rendering
  • menu
    • menu - the menu bar
  • tooltip
    • tooltip - tooltip text (false)

Initial size and position

You can pass any combination of x, y, w, h, cx, cy, cw, ch as long as you pass both the width and the height in one way or another. The position is optional and it defaults to OS-driven cascading.

Additionally, x and/or y can be 'center-main' or 'center-active' which will center the window on the main or active display respectively.

If the size is max-constrained by either max_cw, max_ch or resizeable = false then maximizable = false and fullscreenable = false must also be set.

Expect the OS to adjust the window size and/or position in unspecified ways for off-screen windows, windows too small to fit all titlebar buttons, windows with zero or negative client size or windows that are very large. Some adjustments are delayed to when the window is shown.

The window state

The window state is the combination of multiple flags (minimized, maximized, fullscreen, visible, active) plus its position, size and frame in current state (client_rect and frame_rect), and in normal state (normal_frame_rect).

State flags are independent of each other, so they can be in almost any combination at the same time. For example, a window which starts with {visible = false, minimized = true, maximized = true} is initially hidden. If later made visible with win:show(), it will show minimized. If the user then unminimizes it, it will restore to maximized state. Throughout all these stages the maximized flag is true.

Coordinate systems

  • window-relative positions are relative to the top-left corner of the window's client area.
  • screen-relative positions are relative to the top-left corner of the main screen.

Child windows

Child windows (parent = win) are top-level windows (so framed, not clipped) that stay on top of their parent, minimize along with their parent, and don't appear in the taskbar.

The following defaults are different for child windows:

  • minimizable: false (must be false)
  • maximizable: false
  • fullscreenable: false
  • edgesnapping: 'parent siblings screen'
  • sticky: true

Child windows can't be minimizable because they don't appear in the taskbar (they minimize when their parent is minimized). Child windows remain visible if their parent is hidden (or is created hidden).

win:parent() -> win|nil

Get the window's parent (read-only).

win:children() -> {win1, ...}

Get the window's children (those whose parent() is this window).

Sticky windows

Sticky windows (sticky = true) follow their parent when their parent is moved.

NOTE: Sticky windows don't work on Linux.

win:sticky() -> t|f

Get the sticky flag (read-only).

Toolbox windows

Toolbox windows (frame = 'toolbox') show a thin title bar on Windows (they show a normal frame on OSX and Linux). They must have a parent.

Transparent windows

Transparent windows (transparent = true) allow using the full alpha channel when drawing on them. They also come with serious limitations (mostly from Windows):

  • they can't be framed so you must pass frame = 'none'.
  • they can't have views.
  • you can't draw on them using OpenGL.

Despite these limitations, transparent windows are the only way to create free-floating tooltips and custom-shaped notification windows.

win:transparent() -> t|f

Get the transparent flag (read-only).

Window closing

Closing the window hides it or destroys it depending on the hideonclose flag. You can prevent closing by returning false in the win:closing() event.

win:close([force])

Close the window. Children are closed first. The force arg allows closing the window without firing the win:closing() event.

Calling close() on a closed window does nothing.

Closing a window results in hiding it or freeing it, depending on the hideonclose flag.

win:dead() -> t|f

Check if the window was destroyed. Calling any other method on a dead window raises an error.

win:closing(reason, [closing_win])

Event: The window is about to close. Reason can be 'quit', 'close', or the first argument passed to close(). When reason is 'close', closing_win is the window initiating the process. Return false from the event handler to refuse closing.

win:closed()

Event: The window was closed and is about to be destroyed. Fired after all children are closed, but before the window itself is destroyed. This event does not fire when hideonclose is true and the window is closed by the user or by calling close() (check the hidden event then).

win:closeable() -> t|f

Get the closeable flag (read-only).

win:hideonclose(t|f) /-> t|f

What to do when a window is closed: hide it or destroying it.

win:free([force])

Close and destroy the window (same as close() when hideonclose is set to false).

NOTE: Ensure that all the windows are freed before the process exits (which is why the autoquit option calls free() on the windows instead of close() which might just hide them). Don't leave it to the gc to free window objects because a window object contains other gc'ed objects that need to be freed in a specific order but the order in which ffi.gc destructors are called is undefined when the window object is gc'ed.

Window & app activation

Activation is about app activation and window activation. Activating a window programatically has an immediate effect only while the app is active. If the app is inactive, the window is not activated until the app becomes active and the user is notified in some other less intrusive way.

If the user activates a different app in the interval between app launch and first window being shown, the app won't be activated back (this is a good thing usability-wise). This doesn't work on Linux (new windows always pop in your face because there's no concept of an "app" really in X).

app:active() -> t|f

Check if the app is active.

app:activate([mode])

Activate the app, which activates the last window that was active before the app got deactivated.

The mode arg can be:

  • 'alert' (default; Windows and OSX only; on Linux it does nothing)
  • 'force' (OSX and Linux only; on Windows it's the same as 'alert')
  • 'info' (OSX only; on Windows it's the same as 'alert'; on Linux it does nothing)

The 'alert' mode: on Windows, this flashes the window on the taskbar until the user activates the window. On OSX it bounces the dock icon until the user activates the app. On Linux it does nothing.

The 'force' mode: on Windows this is the same as the 'alert' mode. On OSX and Linux it pops up the window in the user's face (very rude, don't do it).

The 'info' mode: this special mode allows bouncing up the dock icon on OSX only once. On other platforms it's the same as the default 'alert' mode.

app:activated()
app:deactivated()

Event: the app was activated/deactivated.

app:active_window() -> win|nil

Get the active window, if any (nil if the app is inactive).

win:active() -> t|f

Check if the window is active (false for all windows if the app is inactive).

win:activate()

Activate the window. If the app is inactive, this does not activate the window. Instead it only marks the window to be activated when the app becomes active. If you want to alert the user that it should pay attention to the app/window, call app:activate() after calling this function.

win:activated()
win:deactivated()

Event: window was activated/deactivated.

win:activable() -> t|f

Get the activable flag (read-only). This is useful for creating popup menus that can be clicked on without stealing keyboard focus away from the main window.

NOTE: Only works with frameless windows.

NOTE: This doesn't work in Linux.

App instances

app:check_single_instance()

If another instance of this app is already running, activate it and exit this process. Calling this at the beginning of the app (after setting nw.app_id if that's necessasry) is enough to enable single-app instance behavior.

nw.app_id = id

Set the app ID for single-app-instance checks. All processes with the same app ID will be considered instances of the same app. If this is not set, the executable file which started the process is used as app ID.

NOTE: This must be set before calling nw:app() for the first time.

app:already_running() -> t|f

Check if other instances of this app are running.

app:wakeup_other_instances()

Send wakeup event to other instances of this app.

app:wakeup()

Event: another instance of this app has called app:wakeup_other_instances().

App visibility (OSX)

app:visible() -> t|f
app:visible(t|f)
app:hide()
app:unhide()

Get/set app visibility.

app:hidden()
app:unhidden()

Event: app was hidden/unhidden.

Window state

win:show()

Show the window in its previous state (which can include any combination of minimized, maximized, and fullscreen state flags).

When a hidden window is shown it is also activated, except if it was previously minimized, in which case it is shown in minimized state without being activated.

Calling show() on a visible (which includes minimized) window does nothing.

win:hide()

Hide the window from the screen and from the taskbar, preserving its full state.

Calling hide() on a hidden window does nothing.

win:visible() -> t|f

Check if a window is visible (note: that includes minimized).

win:visible(t|f)

Calls show() or hide() to change the window's visibility.

win:shown()
win:hidden()

Event: window was shown/hidden.

win:minimizable() -> t|f

Get the minimizable flag (read-only).

win:isminimized() -> t|f

Get the minimized state. This flag remains true when a minimized window is hidden.

win:minimize()

Minimize the window and deactivate it. If the window is hidden, it is shown in minimized state (and the taskbar button is not activated).

win:minimized()
win:unminimized()

Event: window was minimized/unminimized.

win:maximizable() -> t|f

Get the maximizable flag (read-only).

win:ismaximized() -> t|f

Get the maximized state. This flag stays true if a maximized window is minimized, hidden or enters fullscreen mode.

win:maximize()

Maximize the window and activate it. If the window was hidden, it is shown in maximized state and activated.

If the window is already maximized it is not activated.

win:maximized()
win:unmaximized()

Event: window was maximized/unmaximized.

win:fullscreenable() -> t|f

Check if a window is allowed to go in fullscreen mode (read-only). This flag only affects OSX - the only platform which presents a fullscreen button on the title bar. Fullscreen mode can always be engaged programatically.

win:fullscreen() -> t|f

Get the fullscreen state.

win:fullscreen(t|f)

Enter or exit fullscreen mode and activate the window. If the window is hidden or minimized, it is shown in fullscreen mode and activated.

If the window is already in the desired mode it is not activated.

win:entered_fullscreen()
win:exited_fullscreen()

Event: entered/exited fullscreen mode.

win:restore()

Restore from minimized, maximized or fullscreen state, i.e. unminimize if the window was minimized, exit fullscreen if it was in fullscreen mode, or unmaximize it if it was maximized (otherwise do nothing).

The window is always activated unless it was in normal mode.

win:shownormal()

Show the window in normal state.

The window is always activated even when it's already in normal mode.

State tracking is about getting and tracking the entire user-changeable state of a window (of or the app) as a whole.

win:showmodal()

Show as modal window to its parent. A modal window disables its parent while it is visible and enables it back when it gets hidden again. The window must be activable and must have a parent or an error is raised.

win:changed(old_state, new_state)

Event: window user-changeable state (i.e. any of the visible, minimized, maximized, fullscreen or active flags) has changed.

app:changed(old_state, new_state)

Event: app user-changeable state (i.e. the visible or active flag) has changed.

win:enabled() -> t|f
win:enabled(t|f)

Get/set the enabled flag (default: true). A disabled window cannot receive mouse or keyboard focus. Disabled windows are useful for implementing modal windows: make a child window and disable the parent while showing the child, and enable back the parent when closing the child.

NOTE: This doesn't work on Linux.

Frame extents

app:frame_extents(frame, has_menu, resizeable) -> left, top, right, bottom

Get the frame extents for a certain frame type. If has_menu is true, then the window also has a menu.

app:client_to_frame(frame, has_menu, resizeable, x, y, w, h) -> x, y, w, h

Given a client rectangle, return the frame rectangle for a certain frame type. If has_menu is true, then the window also has a menu.

app:frame_to_client(frame, has_menu, resizeable, x, y, w, h) -> x, y, w, h

Given a frame rectangle, return the client rectangle for a certain frame type. If has_menu is true, then the window also has a menu.

Size and position

win:client_rect() -> cx, cy, cw, ch
win:client_rect(cx, cy, cw, ch)
win:frame_rect() -> x, y, w, h
win:frame_rect(x, y, w, h)
win:client_size() -> cw, ch
win:client_size(cw, ch)

Get/set the client/frame rect/size in screen coordinates.

When getting: returns nothing if the window is minimized.

When setting: if any of the arguments is nil or false, it is replaced with the current value of that argument to allow for partial changes. Does nothing if the window is minimized, maximized, or in fullscreen mode.

win/view:to_screen(x, y) -> x, y
win/view:to_client(x, y) -> x, y

Convert a point from client space to screen space and viceversa based on client_rect().

win:normal_frame_rect() -> x, y, w, h

Get the frame rect in normal state (in screen coordinates). Unlinke client_rect() and frame_rect(), this always returns a rectangle. This is useful for recreating a window in its previous state which includes the normal frame rectangle, the maximized flag, and optionally the minimized flag. It doesn't include the fullscreen flag (you cannot create a window in fullscreen mode but you can enter fullscreen mode afterwards).

win:sizing(when, how, rect) -> true|nil

Event: window size/position is about to change. The rect arg is a table with the fields x, y, w, h. Change these values in the table to affect the window's final size and position.

NOTE: This event does not fire in Linux.

win:client_rect_changed(cx, cy, cw, ch, oldcx, oldcy, oldcw, oldch)
win:client_moved(cx, cy, oldcx, oldcy)
win:client_resized(cw, ch, oldcw, oldch)
win:frame_rect_changed(x, y, w, h, oldx, oldy, oldw, oldh)
win:frame_moved(x, y, oldx, oldy)
win:frame_resized(w, h, oldw, oldh)

Event: window was moved/resized. These events also fire when a window is hidden or minimized in which case all args are nil, so make sure to test for that.

These events fire together every time in the same order:

  • client_rect_changed
  • client_moved
  • client_resized
  • frame_rect_changed
  • frame_moved
  • frame_resized

win:hittest(x, y, where) -> where

Hit test for moving and resizing frameless windows. Return 'left', 'top', 'right', 'bottom', 'topleft', 'bottomright', 'topright' or 'bottomleft' to specify that the window should be resized, 'move' which means the window should be moved, false which means the coordinates are over the client area, or nil which means that standard resizing should take place. The where arg is the default response for the given coordinates.

Size constraints

win:resizeable() -> t|f

Check if the window is resizeable.

win:minsize() -> cw, ch
win:minsize(cw, ch)
win:minsize(false)

Get/set/clear the minimum client rect size.

The constraint can be applied to one dimension only by passing false or nil for the other dimension. The window is resized if it was smaller than this size. The size is clamped to maxsize if that is set. The size is finally clamped to the minimum (1, 1) which is also the default.

win:maxsize() -> cw, ch
win:maxsize(cw, ch)
win:maxsize(false)

Get/set/clear the maximum client rect size.

The constraint can be applied to one dimension only by passing false or nil for the other dimension. The window is resized if it was larger than this size. The size is clamped to minsize if that is set. Trying to set this on a maximizable or fullscreenable window raises an error.

Edge snapping

win:edgesnapping() -> mode
win:edgesnapping(mode)

Get/set edge snapping mode, which is a string containing any combination of the following words separated by spaces:

  • 'app' - snap to app's windows
  • 'other' - snap to other apps' windows
  • 'parent' - snap to parent window
  • 'siblings' - snap to sibling windows
  • 'screen' or true - snap to screen edges
  • 'all' - equivalent to 'app other screen'
  • false - disable snapping

NOTE: Edge snapping doesn't work on Linux because the win:sizing() event doesn't fire there. It is however already (poorly) implemented by some window managers (eg. Unity) so all is not lost.

win:magnets(which) -> {r1, ...}

Event: get edge snapping rectangles (rectangles are tables with fields x, y, w, h).

Z-Order

win:topmost() -> t|f
win:topmost(t|f)

Get/set the topmost flag. A topmost window stays on top of all other non-topmost windows.

win:raise([rel_to_win])

Raise above all windows/specific window.

win:lower([rel_to_win])

Lower below all windows/specific window.

Window title

win:title() -> title
win:title(title)

Get/set the window's title.

Displays

In multi-monitor setups, the non-mirroring displays are mapped on a virtual surface, with the main display's top-left corner at (0, 0).

app:displays() -> {disp1, ...}
app:displays'#' -> n

Get displays (in no specific order). Mirroring displays are not included. If '#' is given, get the display count instead.

app:main_display() -> disp

Get the display whose screen rect is at (0, 0).

app:active_display() -> disp

Get the display which contains the active window, falling back to the main display if there is no active window.

disp:screen_rect() -> x, y, w, h
disp.x, disp.y, disp.w, disp.h

Get the display's screen rectangle.

disp:desktop_rect() -> cx, cy, cw, ch
disp.cx, disp.cy, disp.cw, disp.ch

Get the display's desktop rectangle (screen minus any taskbars).

NOTE: This doesn't work in Linux for secondary monitors (it gives the screen rect).

app:displays_changed()

Event: displays changed.

win:display() -> disp|nil

Get the display the window is currently on. Returns nil if the window is off-screen. Returns the correct display based on the window's coordinates even if the window is hidden.

Cursors

win:cursor() -> name, t|f
win:cursor(name|t|f)

Get/set the mouse cursor and/or visibility. The name can be:

  • 'arrow' (default)
  • 'text'
  • 'hand'
  • 'cross'
  • 'forbidden'
  • 'size_diag1' (i.e. NE-SW, forward-slash-looking)
  • 'size_diag2' (i.e. NW-SE, backslash-looking)
  • 'size_h'
  • 'size_v'
  • 'move'
  • 'busy_arrow'
  • 'top', 'left', 'right', 'bottom', 'topleft', 'topright', 'bottomleft', 'bottomright' (only different in Linux)

Keyboard

See [nw_keyboard] for the list of key names.

app:key(query) -> t|f

Get key pressed and toggle states. The query can be one or more key names separated by spaces or by + eg. 'alt+f3' or 'alt f3'.

The key name can start with ^ in which case the toggle state of that key is queried instead eg. '^capslock' returns the toggle state of the caps lock key while 'capslock' returns its pressed state. (only the capslock, numlock and scrolllock keys have toggle states).

The key name can start with ! which checks that the key is not pressed.

win:keydown(key)

Event: a key was pressed (not sent on repeat).

win:keyup(key)

Event: a key was depressed.

win:keypress(key)

Event: sent after keydown and on key repeat.

win:keychar(s)

Event: sent after keypress for displayable characters; s is a utf-8 string and can contain one or more code points.

Hi-DPI support

By default, windows contents are scaled by the OS on Hi-DPI screens, so they look blurry but they are readable even if the app is unaware that it is showing on a dense screen. Making the app Hi-DPI-aware means telling the OS to disable this automatic raster scaling and allow the app to scale the UI itself (but this time in vector space) in order to make it readable again on a dense screen.

app:autoscaling() -> t|f

Check if autoscaling is enabled.

app:autoscaling(t|f)

Enable/disable autoscaling.

NOTE: This function must be called before the OS stretcher kicks in, i.e. before creating any windows or calling any display APIs. It will silently fail otherwise.

disp.scalingfactor

The display's scaling factor is an attribute of display objects. This is 1 when autoscaling is enabled and > 1 when disabled and the display is hi-dpi.

If autoscaling is disabled, windows must check their display's scaling factor and scale the UI accordingly.

win:scalingfactor_changed()

A window's display scaling factor changed or most likely the window was moved to a screen with a different scaling factor.

Views

A view object defines a rectangular region within a window for drawing and receiving mouse events.

Views allow partitioning a window's client area into multiple non-overlapping regions that can be rendered using different technologies. In particular, you can use OpenGL on some views, while using bitmaps (and thus cairo) on others. This presents a simple solution to the problem of drawing an antialiased 2D UI around a 3D scene as an alternative to drawing on the textures of orto-projected quads. Views also allow placing native widgets alongside custom-painted areas on the same window.

NOTE: If you use views, bind all mouse events to the views. Do not mix window and view mouse events since the behavior of window mouse events in the presence of views is not consistent between platforms.

win:views() -> {view1, ...}
win:views'#' -> n

Get the window's views. If '#' is given, get the view count instead.

win:view(t) -> view

Create a view (fields of t below):

  • x, y, w, h - view's position (in window's client space) and size
  • visible - start visible (default: true)
  • anchors - resizing anchors (default: 'lt'); can be 'ltrb'
  • opengl - enable and configure OpenGL on the view.

NOTE: The width and height are clamped to the minimum (1, 1).

view:free()

Destroy the view.

view:dead() -> t|f

Check if the view was destroyed.

view:visible() -> t|f
view:visible(t|f)
view:show()
view:hide()

Get/set the view's visibility.

The position and size of the view are preserved while hidden (anchors keep working).

view:rect() -> x, y, w, h
view:rect(x, y, w, h)

Get/set the view's position (in window's client space) and size.

The view rect is valid and can be changed while the view is hidden.

view:size() -> w, h
view:size(w, h)

Get/set the view's size.

view:anchors() -> anchors
view:anchors(anchors)

Get/set the anchors: they can be any combination of 'ltrb' characters representing left, top, right and bottom anchors respectively.

Anchors are a simple but effective way of doing stitched layouting. This is how they work: there's four possible anchors which you can set, one for each side of the view. Setting an anchor on one side fixates the distance between that side and the same side of the window the view is on, so that when the window is moved/resized, the view is also moved/resized in order to preserve the initial distance to that side of the window.

view:rect_changed(x, y, w, h)
view:moved(x, y)
view:resized(w, h)

Event: view's size and/or position changed.

Mouse

win/view:mouse(var) -> val

Get the mouse state. The var arg can be: 'x', 'y', 'pos', 'inside', 'left', 'right', 'middle', 'x1', 'x2'.

The mouse state is not queried: it is the state at the time of the last mouse event. Returns nothing if the window is hidden or minimized.

Mouse coordinates are relative to the window's client-area.

win/view:mouseenter()
win/view:mouseleave()

Event: mouse entered/left the client area of the window.

These events do not fire while the mouse is captured (see mousedown) but a mouseleave event will fire after mouseup if mouseup happens outside the client area of the window/view that captured the mouse.

win/view:mousemove(x, y)

Event: the mouse was moved.

win/view:mousedown(button, x, y, click_count)

Event: a mouse button was pressed; button can be 'left', 'right', 'middle', 'x1', 'x2'.

While a mouse button is down, the mouse is captured by the window/view which received the mousedown event, which means that the same window/view will continue to receive mousemove events even if the mouse leaves its client area.

win/view:mouseup(button, x, y, click_count)

Event: a mouse button was depressed.

win/view:click(button, count, x, y)

Event: a mouse button was clicked (fires immediately after mousedown).

Repeated clicks

TL;DR

function win:click(button, count, x, y)
	if count == 2 then     --double click
		...
	elseif count == 3 then --triple click
		...
		return true         --triple click is as high as we go in this app
	end
end

How it works

When the user clicks the mouse repeatedly, with a small enough interval between clicks and over the same target, a counter is incremented. When the interval between two clicks is larger than the threshold or the mouse is moved too far away from the initial target, the counter is reset (i.e. the click-chain is interrupted). Returning true on the click() event also resets the counter.

This allows processing of double-clicks, triple-clicks, or multi-clicks by checking the count argument on the click() event. If your app doesn't need to process double-clicks or multi-clicks, you can just ignore the count argument. If it does, you must return true after processing the event with the highest count so that the counter is reset.

For instance, if your app supports double-click over some target, you must return true when count is 2, otherwise you might get a count of 3 on the next click sometimes, instead of 1 as expected. If your app supports both double-click and triple-click over a target, you must return true when the count is 3 to break the click chain, but you must not return anything when the count is 2, or you'll never get a count of 3.

The double-click time interval is from the user's mouse settings and it is queried on every click.

win/view:mousewheel(delta, x, y, pixeldelta)
win/view:mousehwheel(delta, x, y, pixeldelta)

Event: the mouse vertical or horizontal wheel was moved. The delta represents the number of lines to scroll.

The number of lines per scroll notch is from the user's mouse settings and it is queried on every wheel event (Windows, OSX).

The extra pixeldelta arg is given on OSX on devices where analog scrolling is available, in which case that value should be used instead.

Rendering

Drawing on a window or view must be done inside the repaint() event by requesting the window/view's bitmap or OpenGL context and drawing on it. The OS fires repaint whenever it loses (part of) the contents of the window. To force a repaint anytime, use win:invalidate().

NOTE: You can't request a bitmap on an OpenGL-enabled window/view and you can't request an OpenGL context on a non-OpenGL-enabled window/view. To enable OpenGL on a window/view you must pass an opengl options table to the window/view creation function (it can be an empty table or just true).

win/view:repaint()

Event: window needs repainting. To repaint the window, simply request the window's bitmap or OpenGL context and draw using that.

win/view:invalidate([invalid_clock])

Request sync'ing and repainting. The optional invalid_clock (which defaults to -inf) specifies the earliest time.clock() when the window/view should be repainted (this is useful for implementing delayed animations efficiently).

win/view:invalid([at_clock]) -> t|f

Check if the window/view is invalid at a specific time point (which defaults to time.clock()).

win/view:validate([at_clock])

Fire the sync() event if the window/view is invalid.

win:sync()

Event: window needs sync'ing. This event is fired before repaint(), but only as a result of calling invalidate().

The point of this function is to separate updating the logical representation of a window or view (i.e. its layout) from updating its raster representation (i.e. its pixels), so that in some parts of the code you can signal that the layout was put in an inconsistent state and must be sync'ed on the next frame, while in other parts of the code you can ask that the layout be sync'ed immediately (eg. because you need to hit-test it on a mousemove event), and all this can happen between frames, independent of the repainting cycle.

win/view:bitmap() -> bmp

Get a bgra8 [bitmap] object to draw on. The bitmap is freed and replaced when the window's client area changes size. The bitmap must be requested inside the repaint() event for drawing purposes, but can also be requested outside the repaint() event for hit-testing purposes.

The alpha channel is not used unless this is a transparent window (note: views cannot be transparent).

bmp:clear()

Fill the bitmap with zeroes.

bmp:cairo() -> cr

Get a [cairo] context on the bitmap. The context lasts as long as the bitmap lasts.

win/view:free_cairo(cr)

Event: cairo context needs to be freed.

win/view:free_bitmap(bmp)

Event: bitmap needs to be freed.

win/view:gl() -> gl

Get an OpenGL context/API to draw on the window or view. For this to work OpenGL must be enabled on the window or view via the opengl options table, which can have the fields:

  • profile - OpenGL profile to use: '1.0', '3.2' ('1.0')
  • antialiasing - enable antialiasing: 'supersample', 'multisample', true, false (false)
  • samples - number of samples for 'multisample' antialiasting (4)
  • vsync - vertical sync: true, false, swap-interval (true)

Menus

app:menu() -> menu

Create a menu.

app:menubar() -> menu

Get the app's menu bar (OSX)

win:menubar() -> menu|nil win:menubar(menu|nil)

Get/set/remove the window's menu bar (Windows, Linux).

win/view:popup(menu, cx, cy)
menu:popup(win/view, cx, cy)

Pop up a menu at a point relative to a window or view.

menu:add([index, ]text, [action], [options])
menu:set(index, text, [action], [options])
menu:add{index =, text =, action =, <option> =}
menu:set{index =, text =, action =, <option> =}

Add/set a menu item. The options are:

  • action - can be a function or another menu to be used as a submenu
  • text - the text to display:
    • & before a letter creates an access key
    • \t followed by a key combination creates a shortcut key
    • the empty string (the default) creates a separator
    • eg. '&Close\tAlt+F4' shows as 'Close Alt+F4' and activates on Alt+C and on Alt+F4
  • submenu - a submenu (same as when action is a submenu)
  • enabled - enabled state (true)
  • checked - checked state (false)

menu:remove(index)

Remove menu item at index.

menu:get(index) -> item
menu:get(index, prop) -> val

Get a menu item, or the value of one of its properties.

menu:items([prop]) -> {item1, ...}
menu:items'#' -> n

Get the menu items. If a property name is given, pluck the values of that property from the menu items instead. If '#' is given, get the item count instead.

menu:checked(index) -> t|f
menu:checked(index, t|f)

Get/set the checked state of a menu item.

Icons

Common API

icon:free()

Free the icon.

icon:bitmap() -> bmp

Get the icon's bitmap.

icon:invalidate()

Request icon redrawing.

icon:repaint()

Event: icon needs redrawing.

icon:free_bitmap(bmp)

Event: the icon's bitmap needs to be freed.

Window icon (Windows)

win:icon([which]) -> icon

Get the window's icon. The which arg can be: 'big' (default), 'small'.

Dock icon (OSX)

app:dockicon() -> icon

Get the app's dock icon.

Notification icons (Windows, OSX)

app:notifyicon(t) -> icon

Create a notification icon.

app:notifyicons() -> {icon1, ...}
app:notifyicons'#' -> n

Get all the notification icons. If '#' is given, get the icon count instead.

icon:tooltip() -> s
icon:tooltip(s)

Get/set the icon's tooltip.

icon:menu() -> menu
icon:menu(menu)

Get/set a menu for the icon.

icon:text() -> s
icon:text(s)

Get/set the status bar item's text (OSX only).

icon:length() -> n
icon:length(n)

Get/set the status bar item's length (OSX only).

File choose dialogs

app:opendialog(t) -> path|{path1,...}|nil

Open a standard "open file" dialog and wait for it to close. Fields of t:

  • title - dialog's title
  • filetypes - supported file extensions eg. {'txt', 'jpg', ...}
  • multiselect - allow multiple selection (false)
  • initial_dir - initial dir

When multiselect = true the dialog returns a list of paths, otherwise it returns a path. If the user closes the dialog without choosing a file, it returns ni.

app:savedialog(t) -> path|nil

Open a standard "save file" dialog and wait for it to close. Fields of t:

  • title dialog's title
  • filetypes - supported file extensions eg. {'txt', 'jpg', ...}
  • filename - default filename
  • initial_dir - initial dir

If the user closes the dialog without choosing a file, it returns ni.

Clipboard

app:getclipboard(format) -> data|nil

Get the clipboard contents in one of the available formats. The format can be:

  • 'text' - returns a string.
  • 'files' - returns {path1, ...}
  • 'bitmap' - returns a [bitmap]

app:getclipboard() -> formats

Get the data formats ({format = true}) currently in clipboard.

app:setclipboard(f|data[, format])

Clear or set the clipboard. Passing false clears it, otherwise data can be:

  • a string (assuming 'text' format).
  • a bitmap (assuming 'bitmap' format).
  • a table {format = ..., data = ...}.
  • a list of strings (for format: 'files').

Drag & Drop

win/view:dropfiles(x, y, files)

Event: files ({filename1, ...}) are dropped over the window/view.

win/view:dragging('enter', t, x, y) -> s
win/view:dragging('hover', t, x, y) -> s
win/view:dragging('drop', t, x, y)
win/view:dragging('leave')

Event: something is being dragged over the window/view. The first arg corresponds to the following mouse events:

  • 'enter' - mouse enter
  • 'hover' - mouse move
  • 'drop' - mouse button up
  • 'leave' - mouse leave

The t arg is a table cotaining the drag payload in one or more formats: {format = data}. The x, y args are the mouse coordinates in window/view client space.

You can respond to the 'enter' and 'hover' stages by returning:

  • 'copy' - show a cursor indicating that the data is being copied
  • 'link' - show a cursor indicating that the data is being linked
  • 'none' - show the normal arrow cursor
  • 'abort' - show the forbidden icon
  • true - means 'copy'
  • false - means 'abort'
  • nil/nothing - means 'abort'

Tooltips

win:tooltip(text)
win:tooltip(false)
win:tooltip() -> text|false

Get/set/hide window's tooltip.

Events

nw uses the [events] mixin to add events functionality to all app, win and view objects. This means that:

  • you can add methods to these objects named after the event and they will be called automatically when the event fires.
  • :on(), :off() and :fire() methods are available on these objects and can be used for custom events too.

app/win/view:events(enabled) -> prev_state

Enable/disable events.

Version checks

app:ver(query) -> t|f

Check that a certain backend API is at a specified version or beyond. The query has the form '<API> <version>' where API can be 'Windows', 'OSX' or 'X'.

Example: app:ver'OSX 10.8' returns true on OSX 10.8 and beyond.

For Windows you can use the following table to figure it out:

Release Version


Windows 10 10.0 (6.2) Windows Server 2016 TP 10.0 (6.2) Windows 8.1 6.3 (6.2) Windows Server 2012 R2 6.3 (6.2) Windows 8 6.2 Windows Server 2012 6.2 Windows 7 6.1 Windows Server 2008 R2 6.1 Windows Server 2008 6.0 Windows Vista 6.0 Windows Server 2003 R2 5.2 Windows Server 2003 5.2 Windows XP 64-Bit Edition 5.2 Windows XP 5.1 Windows 2000 5.0

NOTE: Apps not manifested for Windows 8.1 or Windows 10 will report platforms greater than 6.2 as 6.2 (the [luajit] package comes with proper manifest files).

Common mistakes

Assuming that calls are blocking

The number one mistake you can make is to assume that all calls are blocking. It's very easy to make that mistake because some of them actually are blocking on some platforms (in order of sanity: Windows, OSX and Linux -- X11 is particularly bad because all calls are asynchronous there). In a perfect world they would all be blocking and non-failing which would make programming with them much more robust and intuitive. The real world is an unspecified mess. So never, ever mix queries with commands, i.e. never assume that after a state-changing function returns you can make any assumptions about the state of the objects involved.

Assuming that events fire in a specific order

Do not assume that events fire in a specific order. Even if they appear to do so on one platform, that may not hold true on another platform. For instance, do not assume that app the activation event fires before the window activation event or that one should cause the other to fire.

Creating windows in visible state

The visible flag when creating windows defaults to true, but you should really create windows with visible = false, set up all the event handlers on them and then call win:show(), otherwise you will not catch any events that trigger before you set up the event handlers (sometimes that includes the repaint() event so you will be showing a non-painted window).

Hitting undefined behavior

One of the goals of this library is to reduce undefined behavior, but there will always be corner cases that are not covered. If your app behaves differently when ported to another platform, please file up a bug report. Even for contradictory situations (like seetting a minimum size constraint that is larger than the maxium size constraint) there should be a single answer for all platforms, even if that answer is arbitrary.

Getting Involved

This is one of the bigger bricks of luapower but it is one which lends itself well to community development. The frontend uses composition rather than inheritance to connect to the backend so the communication between the two is always explicit. Features are well separated functionally and visually in the code so they can be developed separately without much risk of regressions. The code is well commented and there's unit tests and interactive tests which cover most of the functionality. The code follows the luapower [coding-style] and [api-design] guidelines.

Development process

All the development planning, coordination and communication is done via github issues and milestones.

Design Goals

  • level out platform differences for common functionality.
  • do support platform idioms and platform-specific functionality.
  • minimize the need for emulation of missing features by rethinking the API.
  • take preventive measures to avoid platform behavior:
    • raise errors for parameter combinations that are not universally supported.
    • clamp values to universally supported ranges.
    • make stable iterators with specified order or better yet, return arrays.
  • seek orthogonality, but do add convenience methods where useful.