Validating Input

As a rule of thumb, you should never trust the data received from end users and should always validate them before putting them to good use.

Given a model populated with user inputs, you can validate the inputs by calling the [[yii\base\Model::validate()]] method. The method will return a boolean value indicating whether the validation succeeds or not. If not, you may get the error messages from the [[yii\base\Model::errors]] property. For example,

$model = new \app\models\ContactForm;

// populate model attributes with user inputs
$model->attributes = \Yii::$app->request->post('ContactForm');

if ($model->validate()) {
    // all inputs are valid
} else {
    // validation failed: $errors is an array containing error messages
    $errors = $model->errors;
}

Behind the scene, the validate() method does the following steps to perform validation:

Determine which attributes should be validated by getting the attribute list from [[yii\base\Model::scenarios()]] using the current [[yii\base\Model::scenario|scenario]]. These attributes are called active attributes.
Determine which validation rules should be used by getting the rule list from [[yii\base\Model::rules()]] using the current [[yii\base\Model::scenario|scenario]]. These rules are called active rules.
Use each active rule to validate each active attribute associated with that rule. If the rule fails, keep an error message for the attribute in the model.

Declaring Rules

To make validate() really work, you should declare validation rules for the attributes you plan to validate. This should be done by overriding the [[yii\base\Model::rules()]] method. The following example shows how the validation rules for the ContactForm model are declared:

public function rules()
{
    return [
        // the name, email, subject and body attributes are required
        [['name', 'email', 'subject', 'body'], 'required'],

        // the email attribute should be a valid email address
        ['email', 'email'],
    ];
}

The [[yii\base\Model::rules()|rules()]] method should return an array of rules, each of which is an array of the following format:

[
    // required, specifies which attributes should be validated by this rule.
    // For a single attribute, you can use the attribute name directly
    // without having it in an array instead of an array
    ['attribute1', 'attribute2', ...],

    // required, specifies the type of this rule.
    // It can be a class name, validator alias, or a validation method name
    'validator',

    // optional, specifies in which scenario(s) this rule should be applied
    // if not given, it means the rule applies to all scenarios
    // You may also configure the "except" option if you want to apply the rule
    // to all scenarios except the listed ones
    'on' => ['scenario1', 'scenario2', ...],

    // optional, specifies additional configurations for the validator object
    'property1' => 'value1', 'property2' => 'value2', ...
]

For each rule you must specify at least which attributes the rule applies to and what is the type of the rule. You can specify the rule type in one of the following forms:

the alias of a core validator, such as required, in, date, etc. Please refer to the Core Validators for the complete list of core validators.
the name of a validation method in the model class, or an anonymous function. Please refer to the Inline Validators subsection for more details.
the name of a validator class. Please refer to the Standalone Validators subsection for more details.

A rule can be used to validate one or multiple attributes, and an attribute may be validated by one or multiple rules. A rule may be applied in certain scenarios only by specifying the on option. If you do not specify an on option, it means the rule will be applied to all scenarios.

When the validate() method is called, it does the following steps to perform validation:

Determine which attributes should be validated by checking the current [[yii\base\Model::scenario|scenario]] against the scenarios declared in [[yii\base\Model::scenarios()]]. These attributes are the active attributes.
Determine which rules should be applied by checking the current [[yii\base\Model::scenario|scenario]] against the rules declared in [[yii\base\Model::rules()]]. These rules are the active rules.
Use each active rule to validate each active attribute which is associated with the rule. The validation rules are evaluated in the order they are listed.

According to the above validation steps, an attribute will be validated if and only if it is an active attribute declared in scenarios() and is associated with one or multiple active rules declared in rules().

Customizing Error Messages

Most validators have default error messages that will be added to the model being validated when its attributes fail the validation. For example, the [[yii\validators\RequiredValidator|required]] validator will add a message "Username cannot be blank." to a model when the username attribute fails the rule using this validator.

You can customize the error message of a rule by specifying the message property when declaring the rule, like the following,

public function rules()
{
    return [
        ['username', 'required', 'message' => 'Please choose a username.'],
    ];
}

Some validators may support additional error messages to more precisely describe different causes of validation failures. For example, the [[yii\validators\NumberValidator|number]] validator supports [[yii\validators\NumberValidator::tooBig|tooBig]] and [[yii\validators\NumberValidator::tooSmall|tooSmall]] to describe the validation failure when the value being validated is too big and too small, respectively. You may configure these error messages like configuring other properties of validators in a validation rule.

Validation Events

When [[yii\base\Model::validate()]] is called, it will call two methods that you may override to customize the validation process:

[[yii\base\Model::beforeValidate()]]: the default implementation will trigger a [[yii\base\Model::EVENT_BEFORE_VALIDATE]] event. You may either override this method or respond to this event to do some preprocessing work (e.g. normalizing data inputs) before the validation occurs. The method should return a boolean value indicating whether the validation should proceed or not.
[[yii\base\Model::afterValidate()]]: the default implementation will trigger a [[yii\base\Model::EVENT_AFTER_VALIDATE]] event. You may either override this method or respond to this event to do some postprocessing work after the validation is completed.

Conditional Validation

To validate attributes only when certain conditions apply, e.g. the validation of one attribute depends on the value of another attribute you can use the [[yii\validators\Validator::when|when]] property to define such conditions. For example,

[
    ['state', 'required', 'when' => function($model) {
        return $model->country == 'USA';
    }],
]

The [[yii\validators\Validator::when|when]] property takes a PHP callable with the following signature:

/**
 * @param Model $model the model being validated
 * @param string $attribute the attribute being validated
 * @return boolean whether the rule should be applied
 */
function ($model, $attribute)

If you also need to support client-side conditional validation, you should configure the [[yii\validators\Validator::whenClient|whenClient]] property which takes a string representing a JavaScript function whose return value determines whether to apply the rule or not. For example,

[
    ['state', 'required', 'when' => function ($model) {
        return $model->country == 'USA';
    }, 'whenClient' => "function (attribute, value) {
        return $('#country').value == 'USA';
    }"],
]

Data Filtering

User inputs often need to be filtered or preprocessed. For example, you may want to trim the spaces around the username input. You may use validation rules to achieve this goal.

The following examples shows how to trim the spaces in the inputs and turn empty inputs into nulls by using the trim and default core validators:

[
    [['username', 'email'], 'trim'],
    [['username', 'email'], 'default'],
]

You may also use the more general filter validator to perform more complex data filtering.

As you can see, these validation rules do not really validate the inputs. Instead, they will process the values and save them back to the attributes being validated.

Handling Empty Inputs

When input data are submitted from HTML forms, you often need to assign some default values to the inputs if they are empty. You can do so by using the default validator. For example,

[
    // set "username" and "email" as null if they are empty
    [['username', 'email'], 'default'],

    // set "level" to be 1 if it is empty
    ['level', 'default', 'value' => 1],
]

By default, an input is considered empty if its value is an empty string, an empty array or a null. You may customize the default empty detection logic by configuring the the [[yii\validators\Validator::isEmpty]] property with a PHP callable. For example,

[
    ['agree', 'required', 'isEmpty' => function ($value) {
        return empty($value);
    }],
]

Note: Most validators do not handle empty inputs if their [[yii\base\Validator::skipOnEmpty]] property takes the default value true. They will simply be skipped during validation if their associated attributes receive empty inputs. Among the core validators, only the captcha, default, filter, required, and trim validators will handle empty inputs.

Ad Hoc Validation

Sometimes you need to do ad hoc validation for values that are not bound to any model.

If you only need to perform one type of validation (e.g. validating email addresses), you may call the [[yii\validators\Validator::validate()|validate()]] method of the desired validator, like the following:

$email = 'test@example.com';
$validator = new yii\validators\EmailValidator();

if ($validator->validate($email, $error)) {
    echo 'Email is valid.';
} else {
    echo $error;
}

Note: Not all validators support such kind of validation. An example is the unique core validator which is designed to work with a model only.

If you need to perform multiple validations against several values, you can use [[yii\base\DynamicModel]] which supports declaring both attributes and rules on the fly. Its usage is like the following:

public function actionSearch($name, $email)
{
    $model = DynamicModel::validateData(compact('name', 'email'), [
        [['name', 'email'], 'string', 'max' => 128],
        ['email', 'email'],
    ]);

    if ($model->hasErrors()) {
        // validation fails
    } else {
        // validation succeeds
    }
}

The [[yii\base\DynamicModel::validateData()]] method creates an instance of DynamicModel, defines the attributes using the given data (name and email in this example), and then calls [[yii\base\Model::validate()]] with the given rules.

Alternatively, you may use the following more "classic" syntax to perform ad hoc data validation:

public function actionSearch($name, $email)
{
    $model = new DynamicModel(compact('name', 'email'));
    $model->addRule(['name', 'email'], 'string', ['max' => 128])
        ->addRule('email', 'email')
        ->validate();

    if ($model->hasErrors()) {
        // validation fails
    } else {
        // validation succeeds
    }
}

After validation, you can check if the validation succeeds or not by calling the [[yii\base\DynamicModel::hasErrors()|hasErrors()]] method, and then get the validation errors from the [[yii\base\DynamicModel::errors|errors]] property, like you do with a normal model. You may also access the dynamic attributes defined through the model instance, e.g., $model->name and $model->email.

Creating Validators

Besides using the core validators included in the Yii releases, you may also create your own validators. You may create inline validators or standalone validators.

Inline Validators

An inline validator is one defined in terms of a model method or an anonymous function. The signature of the method/function is:

/**
 * @param string $attribute the attribute currently being validated
 * @param array $params the additional name-value pairs given in the rule
 */
function ($attribute, $params)

If an attribute fails the validation, the method/function should call [[yii\base\Model::addError()]] to save the error message in the model so that it can be retrieved back later to present to end users.

Below are some examples:

use yii\base\Model;

class MyForm extends Model
{
    public $country;
    public $token;

    public function rules()
    {
        return [
            // an inline validator defined as the model method validateCountry()
            ['country', 'validateCountry'],

            // an inline validator defined as an anonymous function
            ['token', function ($attribute, $params) {
                if (!ctype_alnum($this->$attribute)) {
                    $this->addError($attribute, 'The token must contain letters or digits.');
                }
            }],
        ];
    }

    public function validateCountry($attribute, $params)
    {
        if (!in_array($this->$attribute, ['USA', 'Web'])) {
            $this->addError($attribute, 'The country must be either "USA" or "Web".');
        }
    }
}

Note: By default, inline validators will not be applied if their associated attributes receive empty inputs or if they have already failed some validation rules. If you want to make sure a rule is always applied, you may configure the [[yii\validators\Validator::skipOnEmpty|skipOnEmpty]] and/or [[yii\validators\Validator::skipOnError|skipOnError]] properties to be false in the rule declarations. For example:

[ ['country', 'validateCountry', 'skipOnEmpty' => false, 'skipOnError' => false], ]



### Standalone Validators <a name="standalone-validators"></a>

A standalone validator is a class extending [[yii\validators\Validator]] or its child class. You may implement
its validation logic by overriding the [[yii\validators\Validator::validateAttribute()]] method. If an attribute
fails the validation, call [[yii\base\Model::addError()]] to save the error message in the model, like you do
with [inline validators](#inline-validators). For example,

```php
namespace app\components;

use yii\validators\Validator;

class CountryValidator extends Validator
{
    public function validateAttribute($model, $attribute)
    {
        if (!in_array($model->$attribute, ['USA', 'Web'])) {
            $this->addError($attribute, 'The country must be either "USA" or "Web".');
        }
    }
}

If you want your validator to support validating a value without a model, you should also override [[yii\validators\Validator::validate()]]. You may also override [[yii\validators\Validator::validateValue()]] instead of validateAttribute() and validate() because by default the latter two methods are implemented by calling validateValue().

Client-Side Validation

Client-side validation based on JavaScript is desirable when end users provide inputs via HTML forms, because it allows users to find out input errors faster and thus provides better user experience. You may use or implement a validator that supports client-side validation in addition to server-side validation.

Info: While client-side validation is desirable, it is not a must. Its main purpose is to provide users better experience. Like input data coming from end users, you should never trust client-side validation. For this reason, you should always perform server-side validation by calling [[yii\base\Model::validate()]], like described in the previous subsections.

Using Client-Side Validation

Many core validators support client-side validation out-of-box. All you need to do is just to use [[yii\widgets\ActiveForm]] to build your HTML forms. For example, LoginForm below declares two rules: one uses the required core validator which is supported on both client and server sides; the other uses the validatePassword inline validator which is only supported on the server side.

namespace app\models;

use yii\base\Model;
use app\models\User;

class LoginForm extends Model
{
    public $username;
    public $password;

    public function rules()
    {
        return [
            // username and password are both required
            [['username', 'password'], 'required'],

            // password is validated by validatePassword()
            ['password', 'validatePassword'],
        ];
    }

    public function validatePassword()
    {
        $user = User::findByUsername($this->username);

        if (!$user || !$user->validatePassword($this->password)) {
            $this->addError('password', 'Incorrect username or password.');
        }
    }
}

The HTML form built by the following code contains two input fields username and password. If you submit the form without entering anything, you will find the error messages requiring you to enter something appear right away without any communication with the server.

<?php $form = yii\widgets\ActiveForm::begin(); ?>
    <?= $form->field($model, 'username') ?>
    <?= $form->field($model, 'password')->passwordInput() ?>
    <?= Html::submitButton('Login') ?>
<?php yii\widgets\ActiveForm::end(); ?>

Behind the scene, [[yii\widgets\ActiveForm]] will read the validation rules declared in the model and generate appropriate JavaScript code for validators that support client-side validation. When a user changes the value of an input field or submit the form, the client-side validation JavaScript will be triggered.

If you want to turn off client-side validation completely, you may configure the [[yii\widgets\ActiveForm::enableClientValidation]] property to be false. You may also turn off client-side validation of individual input fields by configuring their [[yii\widgets\ActiveField::enableClientValidation]] property to be false.

Implementing Client-Side Validation

To create a validator that supports client-side validation, you should implement the [[yii\validators\Validator::clientValidateAttribute()]] method which returns a piece of JavaScript code that performs the validation on the client side. Within the JavaScript code, you may use the following predefined variables:

attribute: the name of the attribute being validated.
value: the value being validated.
messages: an array used to hold the validation error messages for the attribute.
deferred: an array which deferred objects can be pushed into (explained in the next subsection).

In the following example, we create a StatusValidator which validates if an input is a valid status input against the existing status data. The validator supports both server side and client side validation.

namespace app\components;

use yii\validators\Validator;
use app\models\Status;

class StatusValidator extends Validator
{
    public function init()
    {
        parent::init();
        $this->message = 'Invalid status input.';
    }

    public function validateAttribute($model, $attribute)
    {
        $value = $model->$attribute;
        if (!Status::find()->where(['id' => $value])->exists()) {
            $model->addError($attribute, $this->message);
        }
    }

    public function clientValidateAttribute($model, $attribute, $view)
    {
        $statuses = json_encode(Status::find()->select('id')->asArray()->column());
        $message = json_encode($this->message);
        return <<<JS
if (!$.inArray(value, $statuses)) {
    messages.push($message);
}
JS;
    }
}

Tip: The above code is given mainly to demonstrate how to support client-side validation. In practice, you may use the in core validator to achieve the same goal. You may write the validation rule like the following:

[ ['status', 'in', 'range' => Status::find()->select('id')->asArray()->column()], ]


### Deferred Validation <a name="deferred-validation"></a>

If you need to perform asynchronous client-side validation, you can create [Deferred objects](http://api.jquery.com/category/deferred-object/).
For example, to perform a custom AJAX validation, you can use the following code:

```php
public function clientValidateAttribute($model, $attribute, $view)
{
    return <<<JS
        deferred.push($.get("/check", {value: value}).done(function(data) {
            if ('' !== data) {
                messages.push(data);
            }
        }));
JS;
}

In the above, the deferred variable is provided by Yii, which is an array of Deferred objects. The $.get() jQuery method creates a Deferred object which is pushed to the deferred array.

You can also explicitly create a Deferred object and call its resolve() method when the asynchronous callback is hit. The following example shows how to validate the dimensions of an uploaded image file on the client side.

public function clientValidateAttribute($model, $attribute, $view)
{
    return <<<JS
        var def = $.Deferred();
        var img = new Image();
        img.onload = function() {
            if (this.width > 150) {
                messages.push('Image too wide!!');
            }
            def.resolve();
        }
        var reader = new FileReader();
        reader.onloadend = function() {
            img.src = reader.result;
        }
        reader.readAsDataURL(file);

        deferred.push(def);
JS;
}

Note: The resolve() method must be called after the attribute has been validated. Otherwise the main form validation will not complete.

For simplicity, the deferred array is equipped with a shortcut method add() which automatically creates a Deferred object and add it to the deferred array. Using this method, you can simplify the above example as follows,

public function clientValidateAttribute($model, $attribute, $view)
{
    return <<<JS
        deferred.add(function(def) {
            var img = new Image();
            img.onload = function() {
                if (this.width > 150) {
                    messages.push('Image too wide!!');
                }
                def.resolve();
            }
            var reader = new FileReader();
            reader.onloadend = function() {
                img.src = reader.result;
            }
            reader.readAsDataURL(file);
        });
JS;
}

AJAX Validation

Some validations can only be done on the server side, because only the server has the necessary information. For example, to validate if a username is unique or not, it is necessary to check the user table on the server side. You can use AJAX-based validation in this case. It will trigger an AJAX request in the background to validate the input while keeping the same user experience as the regular client-side validation.

To enable AJAX validation for the whole form, you have to set the [[yii\widgets\ActiveForm::enableAjaxValidation]] property to be true and specify id to be unique form identifier:

<?php $form = yii\widgets\ActiveForm::begin([
    'id' => 'contact-form',
    'enableAjaxValidation' => true,
]); ?>

You may also turn AJAX validation on or off for individual input fields by configuring their [[yii\widgets\ActiveField::enableAjaxValidation]] property.

You also need to prepare the server so that it can handle the AJAX validation requests. This can be achieved by a code snippet like the following in controller actions:

if (Yii::$app->request->isAjax && $model->load(Yii::$app->request->post())) {
    Yii::$app->response->format = Response::FORMAT_JSON;
    return ActiveForm::validate($model);
}

The above code will check whether the current request is an AJAX. If yes, it will respond to this request by running the validation and returning the errors in JSON format.

Info: You can also use Deferred Validation to perform AJAX validation. However, the AJAX validation feature described here is more systematic and requires less coding effort.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

input-validation.md

input-validation.md

Validating Input

Declaring Rules

Customizing Error Messages

Validation Events

Conditional Validation

Data Filtering

Handling Empty Inputs

Ad Hoc Validation

Creating Validators

Inline Validators

Client-Side Validation

Using Client-Side Validation

Implementing Client-Side Validation

AJAX Validation

Files

input-validation.md

Latest commit

History

input-validation.md

File metadata and controls

Validating Input

Declaring Rules

Customizing Error Messages

Validation Events

Conditional Validation

Data Filtering

Handling Empty Inputs

Ad Hoc Validation

Creating Validators

Inline Validators

Client-Side Validation

Using Client-Side Validation

Implementing Client-Side Validation

AJAX Validation