Skip to content

Latest commit

 

History

History
159 lines (94 loc) · 7.75 KB

cronos-node-best-practises.md

File metadata and controls

159 lines (94 loc) · 7.75 KB
Raw

Best Practices

In order to make it more convenient for DApps and node hosts to set up a node, we have put together a list of useful settings and configurations. Feel free to refer to this guide and adapt settings to suit your own use cases. For a sample config check here.

config.toml

Log_level

  • info Depending on the needs of your application it is ok to stick to info (default), but do consider setting up log-rotation for your logs, and archive logs after a certain amount of time or size, e.g. use a cron job with weekly rotation or until your file size hits ~5GB.
  • set to debug only for debugging purposes, turn off after you are finished with debugging.

db_backend

Since 1.0.2 there is another db parameter in app.toml as well. Be sure to make these 2 parameters the same to avoid issues.

  • goleveldb (default) db for low / medium level traffic use case. The reason being there can be some lock contention, especially with P2P.
  • rocksdb suited for a lot of use-cases, especially for high query load ~ few M / day. Has a better balance between rpc queries and p2p at high traffic. Note thatRocksdb however might have a slower startup time and requires a higher memory allocation. \

Seeds and persistent_peers

  • max_num_inbound_peers For node providers the number of inbound peers can be set to a higher value for example 50.
  • max_num_outbound_peers For users on a private network set a higher number of outbound peers to 30 for example.
  • After peers are connected, set it back to its default value. Note that some trial values might be needed to get it right.
  • seeds Set the list of seeds as instructed in the . section to connect to.
  • persistent_peers is especially useful when using state-sync.md to pull snapshots from.

send_rate and recv_rate

Free to tweak to a higher bytes/sec value, if your networking allows this, e.g. 51200000

timeout_broadcast_tx_commit

  • Freely tweak this parameter. Set to a slightly higher value, such as 20s to wait for a tx to be committed during / broadcast_tx_commit. Be careful a value larger than 10s will result in increasing the global HTTP write timeout, which applies to all connections and endpoints.

max_num_inbound_peers and max_num_outbound_peers

  • max_num_inbound_peers For node providers the number of inbound peers can be set to a higher value for example 50.
  • max_num_outbound_peers For users on a private network set a higher number of outbound peers to 30 for example.
  • After peers are connected, set it back to its default value. Note that some trial values might be needed to get it right.

Metrics

Prometheus provides real-time metrics used for event monitoring and alerting. Prometheus metrics can be served on the Cronos chain. To enable the Prometheus metrics, you will need to set instrumentation.prometheus=true in the config.toml file manually.

Metrics will be served under …/metrics on 26660 port by default, e.g. localhost:26660/metrics. The listening address can be changed in the config.toml file (prometheus_listen_addr).

Sample Settings:

#######################################################
###       Instrumentation Configuration Options     ###
#######################################################
[instrumentation]

# When true, Prometheus metrics are served under /metrics on
# PrometheusListenAddr.
# Check out the documentation for the list of available metrics.
prometheus = true

# Address to listen for Prometheus collector(s) connections
prometheus_listen_addr = ":26660"

# Maximum number of simultaneous connections.
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
max_open_connections = 3

# Instrumentation namespace
namespace = "tendermint"

app.toml

Pruning

  • default Normal usage can just be set to default. In the Cosmos SDK this is defined as:
PruneDefault = NewPruningOptions(362880, 100, 10)

meaning the app will keep the latest 362880 versions (around 21 days by 5 secs block time), and then only keep 1 version for every 100 blocks past the keepRecent period( the rest will be put into the pruning list), and then execute the pruning every 10 blocks.

  • everything if you only need to do transaction broadcasting and only need the last blocks.
  • nothing for DApps that want to be able to query information at a certain known blockheight. Note that this is only needed for archive nodes.

iavl-disable-fastnode and iavl-cache-size

During the dragonberry patch and the upgrade to 0.8.2 and 0.8.3, we enabled the iavl-disable-fastnode config parameter. This provides the option to disable the iavl fastnode indexing migration, as a migration will take multiple hours to complete.

  • iavl-disable-fastnode = false is the default setting and performs the migration. This might take a while. So be prepared in advance and schedule this migration downtime. In case you use a snapshot that has performed migration already (e.g. quicksync), leave the value to false
  • iavl-disable-fastnode = true if you want to disable the fast indexing, and skip the migration. Only use this in case you really are not able to perform the migration now.
  • iavl-cache-size set to 781250 works well as our testing has shown.

app-db-backend

As of v1.0.0 we support golevelDB and rocksDB in a single binary, hence we allow to select the backend with the app-db-backend parameter. If not filled in it will use a fallback option.

First fallback is the deprecated compile-time types.DBBackend value.
Second fallback (if the types.DBBackend also isn't set), is the db-backend value set in config.toml.

  • app-db-backend = "rocksdb" or "golevelsdb"

API

  • enable = true to enable the API server
  • swagger = true to setup the swagger endpoint

Json-RPC

  • api = "eth,txpool,web3" Set to the namespaces you wish to use, optionally add personal,net,debug to that list.
  • evm-timeout Freely tweak this parameter. Set to a slightly higher value, such as 60s to avoid timeouts on eth_calls.
  • http-timeout Freely tweak this parameter. Set to a slightly higher value, such as 60s to avoid read/writes timeouts of the http json-rpc server.
  • http-idle-timeout. Freely tweak this parameter. Set to a slightly higher value, such as 120s to avoid idle timeout of the http json-rpc server.

Debug Method

debug_trace allows nodes to return the trace of block and transaction details. In order to enable debug_trace for your node on the Cronos chain, two places need to be configured correctly under app.toml.

Sample Settings:

# default: the last 362880 states are kept, pruning at 10 block intervals
# nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node)
# everything: 2 latest states will be kept; pruning at 10 block intervals.
# custom: allow pruning options to be manually specified through 'pruning-keep-recent', and 'pruning-interval'
pruning = "everything"

[evm]

# Tracer defines the 'vm.Tracer' type that the EVM will use when the node is run in
# debug mode. To enable tracing use the '--evm.tracer' flag when starting your node.
# Valid types are: json|struct|access_list|markdown
tracer = ""


[json-rpc]

# API defines a list of JSON-RPC namespaces that should be enabled
# Example: "eth,txpool,personal,net,debug,web3"
api = "eth,net,web3,txpool,personal,debug"

In addition, it should run as cronosd start --trace in cronosd start command (archived node). For the resources needed for --trace flag in Cronos mainnet, the mem usage is slightly higher than the others but 64GB should be enough.