CMakeLists.txt

cmake_minimum_required(VERSION 2.8.3)
project(brass_gazebo_battery)

## Compile as C++11, supported in ROS Kinetic and newer
# add_compile_options(-std=c++11)

cmake_policy(SET CMP0054 NEW)

## Find catkin macros and libraries
## if COMPONENTS list like find_package(catkin REQUIRED COMPONENTS xyz)
## is used, also find other catkin packages
find_package(catkin REQUIRED COMPONENTS
  gazebo_dev
  gazebo_plugins
  gazebo_ros
  roscpp
  message_generation
)

find_package(catkin REQUIRED COMPONENTS
        gazebo_dev
        gencpp
        message_generation
        gazebo_msgs
        roscpp
        rospy
        nodelet
        angles
        std_srvs
        geometry_msgs
        sensor_msgs
        nav_msgs
        urdf
        tf
        tf2_ros
        dynamic_reconfigure
        rosgraph_msgs
        trajectory_msgs
        image_transport
        rosconsole
        cv_bridge
        polled_camera
        diagnostic_updater
        camera_info_manager
        )

find_package(ignition-math4 REQUIRED)

## System dependencies are found with CMake's conventions
# find_package(Boost REQUIRED COMPONENTS system)


## Uncomment this if the package has a setup.py. This macro ensures
## modules and global scripts declared therein get installed
## See http://ros.org/doc/api/catkin/html/user_guide/setup_dot_py.html
# catkin_python_setup()

################################################
## Declare ROS messages, services and actions ##
################################################

## To declare and build messages, services or actions from within this
## package, follow these steps:
## * Let MSG_DEP_SET be the set of packages whose message types you use in
##   your messages/services/actions (e.g. std_msgs, actionlib_msgs, ...).
## * In the file package.xml:
##   * add a build_depend tag for "message_generation"
##   * add a build_depend and a run_depend tag for each package in MSG_DEP_SET
##   * If MSG_DEP_SET isn't empty the following dependency has been pulled in
##     but can be declared for certainty nonetheless:
##     * add a run_depend tag for "message_runtime"
## * In this file (CMakeLists.txt):
##   * add "message_generation" and every package in MSG_DEP_SET to
##     find_package(catkin REQUIRED COMPONENTS ...)
##   * add "message_runtime" and every package in MSG_DEP_SET to
##     catkin_package(CATKIN_DEPENDS ...)
##   * uncomment the add_*_files sections below as needed
##     and list every .msg/.srv/.action file to be processed
##   * uncomment the generate_messages entry below
##   * add every package in MSG_DEP_SET to generate_messages(DEPENDENCIES ...)

## Generate messages in the 'msg' folder
# add_message_files(
#   FILES
#   Message1.msg
#   Message2.msg
# )

# Generate services in the 'srv' folder
add_service_files(
  FILES
  SetCharge.srv
  SetChargingRate.srv
  SetCharging.srv
  SetCoef.srv
  SetLoad.srv
)

## Generate actions in the 'action' folder
# add_action_files(
#   FILES
#   Action1.action
#   Action2.action
# )

## Generate added messages and services with any dependencies listed here
generate_messages(
DEPENDENCIES
std_msgs  # Or other packages containing msgs
)


################################################
## Declare ROS dynamic reconfigure parameters ##
################################################

## To declare and build dynamic reconfigure parameters within this
## package, follow these steps:
## * In the file package.xml:
##   * add a build_depend and a run_depend tag for "dynamic_reconfigure"
## * In this file (CMakeLists.txt):
##   * add "dynamic_reconfigure" to
##     find_package(catkin REQUIRED COMPONENTS ...)
##   * uncomment the "generate_dynamic_reconfigure_options" section below
##     and list every .cfg file to be processed

## Generate dynamic reconfigure parameters in the 'cfg' folder
# generate_dynamic_reconfigure_options(
#   cfg/DynReconf1.cfg
#   cfg/DynReconf2.cfg
# )

###################################
## catkin specific configuration ##
###################################
## The catkin_package macro generates cmake config files for your package
## Declare things to be passed to dependent projects
## INCLUDE_DIRS: uncomment this if your package contains header files
## LIBRARIES: libraries you create in this project that dependent projects also need
## CATKIN_DEPENDS: catkin_packages dependent projects also need
## DEPENDS: system dependencies of this project that dependent projects also need
catkin_package(
  LIBRARIES brass_gazebo_battery
  CATKIN_DEPENDS gazebo_plugins gazebo_ros roscpp std_msgs
)

###########
## Build ##
###########

## Specify additional locations of header files
## Your package locations should be listed before other locations
include_directories(
# include
  ${catkin_INCLUDE_DIRS}
  ${IGNITION-MATH2_INCLUDE_DIRS}
)

IF(CMAKE_SYSTEM_PROCESSOR MATCHES "x86_64")
    ADD_DEFINITIONS(-fPIC)
ENDIF()

add_library(battery_discharge SHARED src/battery_discharge.cpp src/ROS_debugging.h)
add_dependencies(battery_discharge ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})
target_link_libraries(battery_discharge ${roscpp_LIBRARIES} ${GAZEBO_LIBRARIES} ${Boost_LIBRARIES} ${IGNITION-MATH_LIBRARIES})

# Important: add ${roscpp_LIBRARIES} to the target_link_library if you are using ros libraries as we use in the battery plugin
add_library(battery_consumer SHARED src/battery_consumer.cpp src/ROS_debugging.h)
add_dependencies(battery_consumer ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})
target_link_libraries(battery_consumer ${GAZEBO_LIBRARIES} ${Boost_LIBRARIES} ${IGNITION-MATH_LIBRARIES})


## Declare a C++ library
#add_library(${PROJECT_NAME} SHARED src/battery_discharge.cpp src/battery_discharge.hh src/battery_consumer.cpp src/battery_consumer.hh)

## Add cmake target dependencies of the library
## as an example, code may need to be generated before libraries
## either from message generation or dynamic reconfigure
#add_dependencies(${PROJECT_NAME} ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})

## Declare a C++ executable
## With catkin_make all packages are built within a single CMake context
## The recommended prefix ensures that target names across packages don't collide
#add_executable(battery_discharge_node src/battery_discharge.cpp)

## Rename C++ executable without prefix
## The above recommended prefix causes long target names, the following renames the
## target back to the shorter version for ease of user use
## e.g. "rosrun someones_pkg node" instead of "rosrun someones_pkg someones_pkg_node"
# set_target_properties(${PROJECT_NAME}_node PROPERTIES OUTPUT_NAME node PREFIX "")

## Add cmake target dependencies of the executable
## same as for the library above
#add_dependencies(battery_discharge_node ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})

## Specify libraries to link a library or executable target against
#target_link_libraries(battery_discharge_node
#  ${catkin_LIBRARIES}
#)


#############
## Install ##
#############

# all install targets should use catkin DESTINATION variables
# See http://ros.org/doc/api/catkin/html/adv_user_guide/variables.html

## Mark executable scripts (Python etc.) for installation
## in contrast to setup.py, you can choose the destination
# install(PROGRAMS
#   scripts/my_python_script
#   DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
# )

## Mark executables and/or libraries for installation
# install(TARGETS ${PROJECT_NAME} ${PROJECT_NAME}_node
#   ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
#   LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
#   RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
# )

install(TARGETS
        battery_discharge
        battery_consumer
        DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
        LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
        )

## Mark cpp header files for installation
#install(DIRECTORY include/${PROJECT_NAME}/
#DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION}
#FILES_MATCHING PATTERN "*.h"
#PATTERN ".svn" EXCLUDE
#)

## Mark other files for installation (e.g. launch and bag files, etc.)
# install(FILES
#   # myfile1
#   # myfile2
#   DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
# )

#############
## Testing ##
#############

## Add gtest based cpp test target and link libraries
# catkin_add_gtest(${PROJECT_NAME}-test test/test_brass_gazebo_battery.cpp)
# if(TARGET ${PROJECT_NAME}-test)
#   target_link_libraries(${PROJECT_NAME}-test ${PROJECT_NAME})
# endif()

## Add folders to be run by python nosetests
# catkin_add_nosetests(test)