Skip to content

Latest commit

 

History

History
243 lines (168 loc) · 6.18 KB

README.md

File metadata and controls

243 lines (168 loc) · 6.18 KB
Raw

namada-interface

See our specs for more detailed documentation in /specs

Installation

Before using apps in this repo, we first need to install all dependencies.

Ubuntu

NOTE These instructions may work with other Ubuntu-based systems, but are only confirmed to work in Ubuntu.

# Install rustup
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

# Add WASM target
rustup target add wasm32-unknown-unknown

# Install clang
sudo apt-get install -y clang

# Install pkg-config
sudo apt-get install -y pkg-config

# Install openssl development packages
sudo apt-get install -y libssl-dev

# Install protoc
sudo apt-get install -y protobuf-compiler

# Install curl
sudo apt-get install -y curl

# Install npm
sudo apt-get install -y npm

# Install wasm-pack
curl https://rustwasm.github.io/wasm-pack/installer/init.sh -sSf | sh

# Install yarn and JS dependencies
npm install -g yarn

# within namada-interface/ base folder:
yarn

# Install web-ext
yarn global add web-ext

macOS

# Install xcode
xcode-select --install

# Install rustup
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

# Add WASM target
rustup target add wasm32-unknown-unknown

# Install clang
brew install clang

# Install pkg-config
brew install pkg-config

# Install openssl development packages
brew install libssl-dev

# Install protoc
brew install protobuf

# Install wasm-pack
curl https://rustwasm.github.io/wasm-pack/installer/init.sh -sSf | sh

# Install yarn and JS dependencies
npm install -g yarn

# within namada-interface/ base folder:
yarn

# Install web-ext
yarn global add web-ext

Finally, update your shell environment (e.g., in ~/.zshrc) to set the following variables:

export CC=/usr/local/opt/llvm/bin/clang
AR=/usr/local/opt/llvm/bin/llvm-ar

Apple Silicon

On macOS, when using Apple Silicon architecture, in order to compile some packages for our wasm dependencies, you will need to install the following:

# Mac M1/M2 only - install brew's version of llvm
brew install llvm

Then, in your shell profile (e.g., ~/.zshrc), export the following environment variables:

# Mac M1/M2 only
export LDFLAGS="-L/opt/homebrew/opt/llvm/lib"
export CPPFLAGS="-I/opt/homebrew/opt/llvm/include"
export CC=/opt/homebrew/opt/llvm/bin/clang
export AR=/opt/homebrew/opt/llvm/bin/llvm-ar

Usage

Local chain

Before you start the extension and interface, you will need at least a chain ID and an RPC URL. This can either be a local chain or an existing network. If you know the chain ID and URL, you can skip the following and simply enter these values in the apps/namada-interface/.env file (to see an example of the values you can set, see .env.sample.)

To build and run the chain locally, you will need to clone http://github.com/anoma/namada.

  1. In namada/, first run make build, then make install

  2. Initialize a local chain with:

    namadac utils init-network --genesis-path genesis/e2e-tests-single-node.toml --wasm-checksums-path wasm/checksums.json --chain-prefix local --unsafe-dont-encrypt --localhost --allow-duplicate-ip

    Make note of the chain ID from this output! This will be used below where {CHAIN_ID} is denoted (replace these instances with the actual chain ID). 3. To transfer funds from faucet via the CLI, you will need to create a wallet:

    namadaw key gen --alias my-key

  3. Before running the chain, you will need to change one configuration file:

    • On Linux: Edit ~/.local/share/namada/{CHAIN_ID}/setup/validator-0/.namada/{CHAIN_ID}/config.toml
    • On macOS: Edit ~/Library/Application\ Support/Namada/{CHAIN_ID}/setup/validator-0/.namada/{CHAIN_ID}/config.toml

  4. In config.toml, change the line cors_allowed_origins = [] to cors_allowed_origins = ["*"], then save and close.

  5. You can now start the local chain

    • On Linux:
    namadan --chain-id {CHAIN_ID} --base-dir ~/.local/share/Namada/{CHAIN_ID}/setup/validator-0/.namada ledger run
    • On macOS:
    namadan --chain-id {CHAIN_ID} --base-dir ~/Library/Application\ Support/Namada/{CHAIN_ID}/setup/validator-0/.namada ledger run

  6. Edit the following value in namada-interface/apps/namada-interface/.env (remember to replace {CHAIN_ID} with the actual chain ID from above):

    REACT_APP_NAMADA_CHAIN_ID={CHAIN_ID}
REACT_APP_NAMADA_URL=http://127.0.0.1:27657/

Extension

Within apps/extension/, we may issue the following commands:

# Build wasm dependencies
yarn wasm:build

# Build wasm dependencies with debugging enabled
yarn wasm:build:dev

# Run development extension for Chrome
yarn start:chrome

# Run development extension for Firefox
yarn start:firefox

# Build Chrome extension (production version)
yarn build:chrome

# Build Firefox extension (production version)
yarn build:firefox

Interface

Within apps/namada-interface/, we may issue the following commands:

# Make sure to build wasm dependencies before starting development server
yarn wasm:build

# Run development interface, hosted at http://localhost:3000
yarn dev:local

# Build production version
yarn build

There are also app-specific instructions in the namada-interface README and the extension README.

Testing

Unit

At the root-level, we can issue commands for all packages in the monorepo. Following is an example:

# Execute all tests within monorepo
# Running this from the root project directory will run unit tests
# for all packages where a test script is defined
yarn test

# Lint all packages
yarn lint

# Fix linting on all packages
yarn lint:fix

e2e

TBA