Tunneling to agate

[ghost]

I'm using a tunnel from openport.io. First I start the server:

bin/agate --content gemini/ --hostname openport.io --lang enUS --addr 192.168.1.101:1965 &

Then openport.io gives me their domain:port to my IP:1965. In a remote client I use
gemini://openport.io:<port>

According to their docs, that should be enough, but the server gives this message :

WARNING dial tcp [::1]:1965: connect: connection refused

Any ideas? It looks like an ipv6 format.

[Johann150]

I think your --addr flag is set wrong. Because you specified the devices external IP, Agate is not listening on the loopback interface (::1 being the loopback IPv6 address). Additionally, you are not listening on IPv6 at all.

Try leaving out the --addr flag, then Agate should be listening in dual stack mode on all interfaces on the default port.

[Johann150]

I might also add, that your --lang flag is also wrong, as listed by the help text of the program (using --help) it should be an RFC 4646 language code to be compatible with Gemini, you are missing the dash for en-US.

[ghost]

Thanks again Johann, that solves it!