lpn (Liferay Portal Nook)

This is LPN https://mdelapenya.github.io/lpn/index.html, a CLI that makes it easy running Liferay Portal's Docker images.

It wraps Docker commands so you just have to run this tool, and pass the specific tag you want to run.

Requirements

You have to install Docker on your machine first. Check this guide.

Installation

For current stable version of lpn, please visit downloads page, and select the target platform, based on O.S. and architecture.

If you are in the Golang world, you could install this tool from source code.

For that reason you need to:

Install Golang runtime
Make sure that you have GOPATH environment variable defined to the location you want to have your Golang projects
Add $GOPATH\bin to your $PATH, like this: export PATH=${PATH}:${GOPATH//://bin:}/bin
Clone this repo under $GOPATH: git clone https://github.com/mdelapenya/lpn $GOPATH/src/github.com/mdelapenya/lpn
From inside the project, run go install

Now you can use lpn from your command line.

Tool Configuration

lpn uses a configuration file in YAML format for the values that could be modified by end-users, like the container names, or the images to be used with each type.

If the configuration file is not present at $HOME/.lpn/config.yml, lpn will create it the first time it is run.

An example of default values are:

container:
  names:
    db:
      ce: db-ce
      commerce: db-commerce
      dxp: db-dxp
      nightly: db-nightly
      release: db-release
    portal:
      ce: lpn-ce
      commerce: lpn-commerce
      dxp: lpn-dxp
      nightly: lpn-nightly
      release: lpn-release
images:
  portal:
    ce:
      image: liferay/portal
      tag: 7.0.6-ga7
    commerce:
      image: liferay/commerce
      tag: 1.1.1
    dxp:
      image: liferay/dxp
      tag: 7.0.10.8
    nightly:
      image: mdelapenya/portal-snapshot
      tag: latest
    release:
      image: mdelapenya/liferay-portal
      tag: latest

A use case of overriding this configuration would be if you would like to update lpn to use a different tag on CE runs. Then, please go to the configuration file and update the proper key:

[...]
images:
  portal:
    ce:
      image: liferay/portal
      tag: 7.1.2-ga3
[...]

Tools logs

The CLI uses Logrus as default Logger, so it's possible to configure the logger using Logging levels to enrich the output of the tool.

To set the log level, please set the environment variable LPN_LOG_LEVEL to one of the following values, being INFO the default one:

$ export LPN_LOG_LEVEL=TRACE
$ export LPN_LOG_LEVEL=DEBUG
$ export LPN_LOG_LEVEL=INFO
$ export LPN_LOG_LEVEL=WARNING
$ export LPN_LOG_LEVEL=ERROR
$ export LPN_LOG_LEVEL=FATAL
$ export LPN_LOG_LEVEL=PANIC

It's also possible to add current timestamp to each log line. To do so, please set the environment variable LPN_LOG_INCLUDE_TIMESTAMP, with "true" (case-insensitive).

$ export LPN_LOG_INCLUDE_TIMESTAMP=TRUE
$ export LPN_LOG_INCLUDE_TIMESTAMP=true

What does lpn do?

With lpn you'll be able to:

Run Liferay Portal containers using the released version you prefer:
- Liferay Portal official images, obtained from here for CE and here for DXP.
- Liferay Portal nightly builds, obtained from here.
- Liferay Portal releases, obtained from here.
- Liferay Portal including specific products, like Commerce.
Run a real database to store portal data
Deploy applications to the running containers:
- Imagine a developer gives you a non-released JAR/WAR file to test it. You could deploy and test it in seconds!
Check logs of the running containers
And more!

Usage

The available capabilities present in the tool are the following:

Run a container from the desired Liferay Portal/DXP image.
Configure a Liferay Portal/DXP container to be run alongside a real database.
Configure a Liferay Portal/DXP container to be run using a custom portal-ext configuration file.
Deploy a file or the content of a directory to the deploy folder of a Liferay Portal/DXP running container.
Display logs of a Liferay Portal/DXP running container.
Pull Liferay Portal/DXP images on demand.
List the available tags to pull from the Docker Hub repository of a Liferay Portal/DXP image.
Check if a Liferay Portal/DXP image was already pulled.
Check if a container of the desired Liferay Portal/DXP image is running.
Stop a Liferay Portal/DXP running container, and possibly all its dependant services, like a database.
Remove a Liferay Portal/DXP running container.
Remove a Liferay Portal/DXP image from your local Docker installation.
Open a Liferay Portal/DXP running container in the default browser.

Which are the available commands?

Execute lpn help to see the list of available commands. Each command could have subcommands, so append the help command to each subcommand and you'll get a list of options for each one.

This could be an example of how the help subcommand shows:

$ lpn help
A Fast and Flexible CLI for managing Liferay Portal's Docker images
				built with ❤️ by mdelapenya and friends in Go.

Usage:
  lpn [flags]
  lpn [command]

Available Commands:
  checkc        Checks if there is a container created by lpn (Liferay Portal Nook)
  checki        Checks if the proper Liferay Portal image has been pulled by lpn (Liferay Portal Nook)
  deploy         Deploys a file to Liferay Portal's deploy folder in the container run by lpn
  help           Help about any command
  license        Print the license of lpn
  log            Displays logs for the Liferay Portal instance
  pull           Pulls a Liferay Portal Docker image
  rm             Removes the Liferay Portal instance
  run            Runs a Liferay Portal instance
  start          Starts the Liferay Portal instance
  stop           Stops the Liferay Portal instance
  update         Updates lpn (Liferay Portal Nook) to the latest version
  version        Print the version number of lpn (Liferay Portal Nook)

Flags:
  -h, --help   help for lpn

Use "lpn [command] --help" for more information about a command.

Once you have typed the proper command, to specify with which image type you want to execute the command, there are the following subcommands:

ce
dxp
release
nightly
commerce

So any command needs the combination of one of the subcommands above. So to run a DXP image, you would need to execute lpn run dxp.

Running a container from a Liferay Portal/DXP image

It will run the desired image, pulling it first if it does not exist in your local Docker installation. To specify which image type you want to run, please select it adding the ce, dxp, release, nightly, commerce subcommands.

You will be able to configure in which state you want to run the image, using the following flags:

Flag	Description
`-d, --debug`	Enables debug mode. (default false)
`-D, --debugPort`	Sets the debug port of Liferay Portal's bundle. It only applies if debug mode is enabled (default 9000)
`-g, --gogoPort`	Sets the GoGo Shell port of Liferay Portal's bundle. (default 11311)
`-p, --httpPort`	Sets the HTTP port of Liferay Portal's bundle. (default 8080)
`-m, --memory`	Sets the memory for the JVM memory configuration of Liferay Portal's bundle. (default "-Xmx2048m" in the CE and DXP images, and "2048m" in the rest)
`-P, --properties`	Sets the location of a portal-ext properties files to configure the running instance of Liferay Portal's bundle.
`-s, --datastore`	Sets the default store type for the portal (default hsql). If the `storeType` command is different than "hsql", then lpn will try to spin up a container for the datastore, connected to the running portal instance. Available datastores are: hsql, mysql and postgresql.

| | -t, --tag | Sets the image tag to run |

Examples:

$ lpn run ce -t "7.1.1-ga2"
$ lpn run dxp --properties "/tmp/portal-ext.properties"
$ lpn run nightly
$ lpn run commerce --debug --httpPort 8081 --memory "Xmx8g"
$ lpn run commerce --debug --httpPort 8081 --store "hsql"

Copying files to the deploy folder

It will deploy a file, or the first-level content of a directory, to the deploy folder of a running container, pulling it first if it does not exist in your local Docker installation. To specify to which image type you want to deploy, please select it adding the ce, dxp, release, nightly, commerce subcommands.

You will be able to configure which file or directory you want to deploy to the running container, using the following flags:

Flag	Description
`-d, --dir`	The directory to deploy its content. Only first-level files will be deployed, so no recursive deployment will happen
`-f, --files`	The file or files to deploy. A comma-separated list of files is accepted to deploy multiple files at the same time

Examples:

$ lpn deploy ce --dir /tmp/modules-from-my-dev-team
$ lpn deploy nightly --files /tmp/moduleA.jar
$ lpn deploy commerce --files /tmp/moduleA.jar,/tmp/themeB.war

Displaying logs

It will display the logs of a running container, reading each log line in a tail mode. In this case this log corresponds to the Tomcat's log file. To specify to which image type you want to show logs, please select it adding the ce, dxp, release, nightly, commerce subcommands.

This command does not accept any flag to configure its execution.

Examples:

$ lpn log ce
$ lpn log dxp
$ lpn log release
$ lpn log nightly
$ lpn log commerce

Pulling Liferay images

It will pull a desired image from Docker Hub to your local Docker installation. To specify to which image type you want to pull, please select it adding the ce, dxp, release, nightly, commerce subcommands.

You will be able to configure which image you are going to pull using the following flags:

Flag	Description
`-f, --forceRemoval`	Removes the cached, local image, if exists
`-t, --tag`	Sets the image tag to pull

Depending on the image type, the default value for --tag flag would be:

For CE: 7.0.6-ga7
For DXP: 7.0.10.8
For Releases: latest
For Nightly Builds and Commerce: Current date in the 20181128 format.

Examples:

$ lpn pull ce
$ lpn pull release --forceRemoval
$ lpn pull commerce --tag "20181026"

Listing the available Liferay images

It will list the existing tags on Docker Hub for the desired images type. To specify to which image type you want to list its tags, please select it adding the ce, dxp, release, nightly, commerce subcommands.

You will be able to browse the list of available tags using the following flags:

Flag	Description
`-p, --page`	Sets the page element where tags exist (default 1)
`-size, --size`	Sets the number of tags to retrieve per page (default 25)

Examples:

$ lpn tags ce
$ lpn tags dxp --page 2 --size 5
$ lpn tags release
$ lpn tags nightly -p 2 -s 5
$ lpn tags commerce

Checking if an image is present in the local Docker installation

It will check if the desired images type exists in your local Docker installation. To specify to which image type you want to check, please select it adding the ce, dxp, release, nightly, commerce subcommands.

You will be able to configure which image you are going to check using the following flags:

Flag	Description
`-t, --tag`	Sets the image tag to check

Depending on the image type, the default value for --tag flag would be:

For CE: 7.0.6-ga7
For DXP: 7.0.10.8
For Releases: latest
For Nightly Builds and Commerce: Current date in the 20181128 format.

Examples:

$ lpn checki ce --tag "6.1.2-ga3"
$ lpn checki dxp --tag "7.0.10.8"
$ lpn checki release
$ lpn checki nightly --tag "20181026"
$ lpn checki commerce

Checking if a container is running

It will check if there is a running container for the desired images type. To specify to which image type you want to check its container, please select it adding the ce, dxp, release, nightly, commerce subcommands.

This command does not accept any flag to configure its execution.

Examples:

$ lpn checkc ce
$ lpn checkc dxp
$ lpn checkc release
$ lpn checkc nightly
$ lpn checkc commerce

Starting a stopped container

It will start an already stopped container, if it exists. To specify to which image type you want to start its container, please select it adding the ce, dxp, release, nightly, commerce subcommands.

This command does not accept any flag to configure its execution, and will also start all dependant services (like a database), if present.

Examples:

$ lpn start ce
$ lpn start dxp
$ lpn start release
$ lpn start nightly
$ lpn start commerce

Stopping a running container

It will stop a running container, if it exists. To specify to which image type you want to stop its container, please select it adding the ce, dxp, release, nightly, commerce subcommands.

This command does not accept any flag to configure its execution, and will also stop all dependant services (like a database), if present.

Examples:

$ lpn stop ce
$ lpn stop dxp
$ lpn stop release
$ lpn stop nightly
$ lpn stop commerce

Removing a running container

It will remove a running container, if it exists. To specify to which image type you want to remove its container, please select it adding the ce, dxp, release, nightly, commerce subcommands.

This command does not accept any flag to configure its execution, and will also remove all dependant services (like a database), if present.

Examples:

$ lpn rm ce
$ lpn rm dxp
$ lpn rm release
$ lpn rm nightly
$ lpn rm commerce

Removing an image from your local Docker installation

It will remove the desired images type from your local Docker installation. To specify to which image type you want to remove, please select it adding the ce, dxp, release, nightly, commerce subcommands.

You will be able to configure which image you are going to remove using the following flags:

Flag	Description
`-t, --tag`	Sets the image tag to remove

Depending on the image type, the default value for --tag flag would be:

For CE: 7.0.6-ga7
For DXP: 7.0.10.8
For Releases: latest
For Nightly Builds and Commerce: Current date in the 20181128 format.

Examples:

$ lpn rmi ce --tag "6.1.2-ga3"
$ lpn rmi dxp --tag "7.0.10.8"
$ lpn rmi release
$ lpn rmi nightly --tag "20181026"
$ lpn rmi commerce

Showing the license

It will display the license of the tool. It's using BSD-3 license, but we are in the process of deciding which one to use.

$ lpn license

Showing tool's current version

It will display the version of the tool, including the version of the required runtime dependencies (Docker).

$ lpn version
lpn (Liferay Portal Nook) v0.7.1 -- HEAD
Docker version:
Client version: 1.25
Server version: 18.06.1-ce
Go version: go1.10.3

It shows Go version because is used by Docker.

Opening the running instance from a browser

It will open the O.S. default browser with the home page of the running instance of the desired images type. To specify to which image type you want to open in the browser, please select it adding the ce, dxp, release, nightly, commerce subcommands.

This command does not accept any flag to configure its execution.

Examples:

$ lpn open ce
$ lpn open dxp
$ lpn open release
$ lpn open nightly
$ lpn open commerce

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

lpn (Liferay Portal Nook)

Requirements

Installation

Tool Configuration

Tools logs

What does lpn do?

Usage

Which are the available commands?

Running a container from a Liferay Portal/DXP image

Copying files to the deploy folder

Displaying logs

Pulling Liferay images

Listing the available Liferay images

Checking if an image is present in the local Docker installation

Checking if a container is running

Starting a stopped container

Stopping a running container

Removing a running container

Removing an image from your local Docker installation

Showing the license

Showing tool's current version

Opening the running instance from a browser

Files

README.md

Latest commit

History

README.md

File metadata and controls

lpn (Liferay Portal Nook)

Requirements

Installation

Tool Configuration

Tools logs

What does lpn do?

Usage

Which are the available commands?

Running a container from a Liferay Portal/DXP image

Copying files to the deploy folder

Displaying logs

Pulling Liferay images

Listing the available Liferay images

Checking if an image is present in the local Docker installation

Checking if a container is running

Starting a stopped container

Stopping a running container

Removing a running container

Removing an image from your local Docker installation

Showing the license

Showing tool's current version

Opening the running instance from a browser