Localization - Translated Strings

i18n/chs/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "如果为 `true`，则当在工作区中找到 CMakeLists.txt 文件，但未在根文件夹中找到时，扩展将不会要求用户选择 CMakeLists.txt 文件以进行配置。",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "控制启动目标时启动终端将执行的操作。",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "当工具包或配置预设发生更改时，将自动配置 CMake 项目目录。",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "要固定的 CMake 命令的列表。",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "未选择工具包时启用工具包的自动扫描。这只会在未使用 CMake 预设时生效。",
 	"cmake-tools.debugger.pipeName.description": "用于调试器通信的管道(在 Windows 上)或域套接字(在 Unix 上)的名称。",
 	"cmake-tools.debugger.clean.description": "在配置之前清理。",

i18n/cht/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "如果為 `true`，當工作區中找到某個檔案但卻不在根資料夾中時，延伸就不會要求使用者選取要設定的 CMakeLists.txt 檔案。",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "控制啟動終端機在您啟動目標時要執行的動作。",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "當套件或設定預設變更時，自動設定 CMake 專案目錄。",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "要釘選的 CMake 命令清單。",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "未選取套件時啟用套件的自動掃描。只有在未使用 CMake 預設時才會生效。",
 	"cmake-tools.debugger.pipeName.description": "用於偵錯工具通訊的管道 (在 Windows 上) 或網域通訊端 (在 Unix 上) 的名稱。",
 	"cmake-tools.debugger.clean.description": "在設定之前先清除。",

i18n/csy/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Když se nastaví na `true`, rozšíření nebude uživatele žádat, aby vybral soubor CMakeLists.txt pro konfiguraci, když se nějaký najde v pracovním prostoru, ale ne v kořenové složce.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Určuje, co se stane se spouštěcím terminálem, když spustíte cíl.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Automaticky nakonfigurujte adresáře projektu CMake při změně sady nebo předvolby konfigurace.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Seznam příkazů CMake, které se mají připnout.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Umožňuje povolit automatické vyhledávání sad, když není vybrána sada. Bude to mít vliv jen v případě, že se nepoužívají předvolby CMake.",
 	"cmake-tools.debugger.pipeName.description": "Název kanálu (ve Windows) nebo soketu domény (v systému Unix), který se má použít pro komunikaci ladicího programu.",
 	"cmake-tools.debugger.clean.description": "Před konfigurací vyčistěte.",

i18n/deu/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "`true` gibt an, dass der Benutzer von der Erweiterung nicht aufgefordert wird, eine CMakeLists.txt-Datei für die Konfiguration auszuwählen, wenn eine Datei im Arbeitsbereich, aber nicht im Stammordner gefunden wird.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Steuert, was mit dem Startterminal beim Starten eines Ziels geschieht.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Hiermit werden CMake-Projektverzeichnisse automatisch konfiguriert, wenn das Kit oder die Konfigurationsvoreinstellung geändert wird.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Liste der anzuheftenden CMake-Befehle.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Aktivieren Sie die automatische Überprüfung für Kits, wenn kein Kit ausgewählt ist. Dies wird nur wirksam, wenn keine CMake-Voreinstellungen verwendet werden.",
 	"cmake-tools.debugger.pipeName.description": "Der Name der Pipe (unter Windows) oder des Domänensockets (unter Unix) zur Verwendung für die Debuggerkommunikation.",
 	"cmake-tools.debugger.clean.description": "Hiermit erfolgt vor der Konfiguration eine Bereinigung.",

i18n/esn/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Si es `true`, la extensión no pedirá al usuario que seleccione un archivo CMakeLists.txt para la configuración cuando se encuentre uno en el área de trabajo, pero no en la carpeta raíz.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Controla lo que sucede con el terminal de inicio al iniciar un destino.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Configurar automáticamente los directorios del proyecto de CMake cuando se cambie el kit o el valor preestablecido de configuración.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Lista de comandos de CMake a anclar.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Habilitar el examen automático de kits cuando no se selecciona un kit. Esto solo tendrá efecto cuando no se usen valores preestablecidos de CMake.",
 	"cmake-tools.debugger.pipeName.description": "Nombre de la canalización (en Windows) o socket de dominio (en Unix) que se va a usar para la comunicación del depurador.",
 	"cmake-tools.debugger.clean.description": "Limpiar antes de la configuración.",

i18n/fra/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Si la valeur est `true`, l’extension ne demande pas à l’utilisateur de sélectionner un fichier CMakeLists.txt pour la configuration lorsqu’un fichier est trouvé dans l’espace de travail mais pas dans le dossier racine.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Contrôle ce qui se passe avec le terminal de lancement quand vous lancez une cible.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Permet de configurer automatiquement les répertoires de projet CMake lorsque la trousse ou la présélection de configuration sont modifiées.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Liste des commandes CMake à épingler.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Activez l’analyse automatique des kits lorsqu’un kit n’est pas sélectionné. Cela n’aura d’incidence que lorsque les préréglages CMake ne sont pas utilisés.",
 	"cmake-tools.debugger.pipeName.description": "Nom du canal (sur Windows) ou du socket de domaine (sur Unix) à utiliser pour la communication du débogueur.",
 	"cmake-tools.debugger.clean.description": "Nettoyer avant la configuration.",

i18n/ita/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Se è `true`, l'estensione non richiederà all'utente di selezionare un file CMakeLists.txt per la configurazione quando ne viene trovato uno nell'area di lavoro ma non nella cartella radice.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Controlla cosa accade al terminale di avvio quando si avvia una destinazione.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Configurare automaticamente le directory del progetto CMake quando il kit o il set di impostazioni di configurazione viene modificato.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Elenco dei comandi CMake da bloccare.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Abilitare l'analisi automatica dei kit quando non è selezionato un kit. Questa operazione avrà effetto solo quando i set di impostazioni di CMake non vengono usati.",
 	"cmake-tools.debugger.pipeName.description": "Nome della pipe (in Windows) o del socket di dominio (su Unix) da utilizzare per la comunicazione del debugger.",
 	"cmake-tools.debugger.clean.description": "Pulisci prima di configurare.",

i18n/jpn/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "`true` の場合、拡張機能は、ワークスペース内で見つかったがルート フォルダーにない場合に、構成用の CMakeLists.txt ファイルを選択するようにユーザーに求めなくなります。",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "ターゲットを起動するときの起動ターミナルの動作を制御します。",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "キットまたは構成プリセットが変更されたときに、CMake プロジェクト ディレクトリを自動的に構成します。",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "ピン留めする CMake コマンドの一覧。",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "キットが選択されていない場合は、キットの自動スキャンを有効にします。これは、CMake プリセットが使用されていない場合にのみ影響します。",
 	"cmake-tools.debugger.pipeName.description": "デバッガー コミュニケーションに使用するパイプ (Windows 上) またはドメイン ソケット (Unix 上) の名前。",
 	"cmake-tools.debugger.clean.description": "構成する前にクリーンアップします。",

i18n/kor/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "`true`이면 확장에서 작업 영역에 있지만 루트 폴더에는 없는 경우 구성을 위해 CMakeLists.txt 파일을 선택하도록 사용자에게 요청하지 않습니다.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "대상을 시작할 때 시작 터미널에서 수행되는 작업을 제어합니다.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "키트 또는 구성 사전 설정이 변경되면 CMake 프로젝트 디렉터리를 자동으로 구성합니다.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "고정할 CMake 명령 목록입니다.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "키트를 선택하지 않은 경우 키트 자동 검사를 활성화합니다. CMake 사전 설정을 사용하지 않는 경우에만 적용됩니다.",
 	"cmake-tools.debugger.pipeName.description": "디버거 통신에 사용할 파이프(Windows) 또는 도메인 소켓(Unix의 경우)의 이름입니다.",
 	"cmake-tools.debugger.clean.description": "구성하기 전에 정리합니다.",

i18n/plk/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Jeśli ma wartość `true`, rozszerzenie nie będzie monitować użytkownika o wybranie pliku CMakeLists.txt do konfiguracji, gdy zostanie znaleziony w obszarze roboczym, ale nie w folderze głównym.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Określa, co się dzieje z terminalem uruchamiania po uruchomieniu elementu docelowego.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Automatycznie konfiguruj katalogi projektu narzędzia CMake po zmianie zestawu lub ustawienia wstępnego konfiguracji.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Lista poleceń narzędzia CMake do przypięcia.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Włącz automatyczne skanowanie w poszukiwaniu zestawów, gdy zestaw nie jest wybrany. Będzie to miało wpływ tylko wtedy, gdy nie są używane ustawienia wstępne narzędzia CMake.",
 	"cmake-tools.debugger.pipeName.description": "Nazwa potoku (w systemie Windows) lub gniazda domeny (w systemie Unix) do użycia na potrzeby komunikacji debugera.",
 	"cmake-tools.debugger.clean.description": "Wyczyść przed skonfigurowaniem.",

i18n/ptb/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Se for `true`, a extensão não solicitará que o usuário selecione um arquivo CMakeLists.txt para configuração quando um for encontrado no espaço de trabalho, mas não na pasta raiz.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Controla o que acontece com o terminal de lançamento quando você lança um alvo.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Configure automaticamente os diretórios do projeto CMake quando o kit ou a predefinição de configuração for alterada.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Lista de comandos CMake para fixar.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Habilita a verificação automática de kits quando um kit não é selecionado. Isso só terá efeito quando as predefinições do CMake não estiverem sendo usadas.",
 	"cmake-tools.debugger.pipeName.description": "Nome do canal (no Windows) ou soquete de domínio (no Unix) a ser usado para comunicação do depurador.",
 	"cmake-tools.debugger.clean.description": "Limpe antes de configurar.",

i18n/rus/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "Если установлено значение `true`, расширение не будет просить пользователя выбрать файл CMakeLists.txt для конфигурации, если такой файл обнаружен в рабочей области, но не в корневой папке.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Управляет тем, что происходит с терминалом запуска при запуске целевого объекта.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Автоматически настраивать каталоги проектов CMake при изменении набора или предустановки конфигурации.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Список команд CMake для закрепления.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Включить автоматическую проверку наборов, если набор не выбран. Это вступит в силу только в том случае, если не используются предустановки CMake.",
 	"cmake-tools.debugger.pipeName.description": "Имя канала (в Windows) или сокета домена (в Unix), используемого для связи отладчика.",
 	"cmake-tools.debugger.clean.description": "Очистка перед настройкой.",

i18n/trk/package.i18n.json

@@ -208,7 +208,7 @@
 	"cmake-tools.configuration.cmake.ignoreCMakeListsMissing.description": "`true` ise; CMakeLists.txt, çalışma alanında bulunduğunda ama kök klasörde bulunmadığında, uzantı kullanıcıdan yapılandırma için bir CMakeLists.txt dosyası seçmesini istemez.",
 	"cmake-tools.configuration.cmake.launchBehavior.description": "Bir hedefi başlattığınızda başlatma terminaline ne olacağını kontrol eder.",
 	"cmake-tools.configuration.cmake.automaticReconfigure.description": "Set veya yapılandırma ön ayarı değiştirildiğinde CMake proje dizinlerini otomatik olarak yapılandır.",
-	"cmake-tools.configuration.cmake.pinnedCommands.description": "Sabitlenecek CMake komutlarının listesi.",
+	"cmake-tools.configuration.cmake.pinnedCommands.description": "List of CMake commands to always pin by default.",
 	"cmake-tools.configuration.cmake.enableAutomaticKitScan.description": "Set seçilmediğinde setler için otomatik taramayı etkinleştirin. Bu, yalnızca CMake Önayarları kullanılmadığında devreye girer.",
 	"cmake-tools.debugger.pipeName.description": "Hata ayıklayıcı iletişimi için kullanılacak kanalın (Windows'da) veya etki alanı yuvasının (Unix üzerinde) adı.",
 	"cmake-tools.debugger.clean.description": "Yapılandırmadan önce temizleyin.",