Skip to content

Stanton Scs.3D Mixxx User Guide

Sean M. Pappalardo edited this page Mar 13, 2009 · 26 revisions

Stanton SCS.3d & Mixxx User Guide

This guide explains how the SCS.3d is mapped by default in Mixxx 1.6.2 by mode.

Mode buttons

  • FX - Adjust & toggle Flanger effect, toggle reverse effect
  • EQ - Adjust channel EQ parameters
  • Loop - nothing in this release (but flashes the button lights. Impress your friends!)
  • Trig - Hot cues
  • Vinyl - Toggle between pitch bend, vinyl manipulation & scratching, and track selection
  • Deck - Adjust cross-fader and switch to the other virtual deck

Common to all modes:

(except where noted)

  • Gain slider (S1) adjusts deck volume
  • Pitch slider (S2) adjusts deck pitch control
  • B11 toggles headphone cue
  • B12 toggles pitch range (black=8%, blue=12%, purple=50%, red=100%)
  • B13 Rewind (REW)
  • B14 Fast Forward (FFWD)

While holding down the current mode button:

  • Gain slider (S1) adjusts pre-fader gain
  • Pitch slider (S2) finely adjusts pitch control
  • B12 resets pitch to center 0%

While holding down Deck button:

  • Center slider (S4) adjusts the cross-fader
  • B12 resets cross-fader to center position

FX Mode

  • Left slider (S3) adjusts flanger depth
  • Center slider (S4) adjusts flanger delay
  • Right slider (S5) adjusts flanger period (Low Frequency Oscillator)
  • B11 plays track in reverse while held down
  • B12 toggles flanger effect

EQ Mode

  • Left slider (S3) adjusts low frequency equalizer
  • Center slider (S4) adjusts mid frequency equalizer
  • Right slider (S5) adjusts high frequency equalizer

Loop Mode

(This does nothing in Mixxx 1.6.2. It will control looping in a future version.)

Trig Modes

These modes configure the surface as 9 buttons (lit up dim red for visibility.)

The red LEDs flash when you press the corresponding button. The outer blue LEDs light when a cue point is set on that button.

  • To set a cue, just press a free button at the desired time.
  • To recall a cue, just press a button that has a cue point set
  • To erase a cue, hold TRIG while pressing the button(s) you want to erase

Vinyl Modes

Vinyl mode (red)

  • Outer circle (C1) allows you to bend the song's pitch, akin to dragging your finger on the record
  • Center slider (S4) allows you to "scratch" the song

Vinyl2 Mode (purple)

  • Outer circle (C1) allows you to "scratch" the song and perform juggles
  • Center slider (S4) allows you to "scratch" the song

Track Select Mode (black)

  • Outer circle (C1) allows you to scroll through your Library
  • Center button (anywhere on S4) loads the currently highlighted song into the first stopped deck
  • B11 selects backward between Library, Playlist, and Browse views
  • B12 selects forward between Library, Playlist, and Browse views
  • B13 moves the highlight up one item
  • B14 moves the highlight down one item
Clone this wiki locally