SH5.0RS compatible?

[garaujo23]

Hey there, firstly this repo and all the work you have done looks great, thanks for all your efforts. Just a little confused around the compatibility of the SH5.0RS range, which is listed in the description. From what I can tell, you don't support using LAN through the WiNet S dongle but only direct into the internal LAN port that isn't available on the SHx.xRS range.

I tried to remove the dongle and put a LAN to a switch but it doesn't register on the switch (even after shutdown and cold start).

So just confirming, is the compatibility for SH5.0RS a partial one through WiNet S Lan? Or have a missed something?

[rajeshgpai]

I'm facing the same with my SH5.0RS. Has anyone got it working through the WiNet-S LAN?

[silviopen]

I have an SH6.0RS inverter (similar to yours) and I can confirm that the integration works even using the WiNet S dongle.
I connected the network cable to the dongle, but only because I think it is more reliable to connect to the router.

[garaujo23]

@silviopen does it work for all values? I am using the WiNet S dongle via wifi and the following show no values:
-Meter active power, Phase A etc
-All monthly values
-Sungrow inverter state (only when self consumption, it shows properly for forced mode)
-All states on the default dashboard, PV generating, battery charging etc

[silviopen]

Hi @garaujo23,
I have only done some tests to configure the Dashboard, and I see many values.
Of the ones you asked about, the monthly power summaries are not available.

[skydado]

I believe that the modbus values, shared through the WiNet-S LAN, depend on the specific model.
I have the SH3.0RS and, for example, I have the Phase A Power entity in status "unavailable". Same for the most useful entities.
So in my case this integration is not useful at all ... unfortunately.
I use the GoSunGrow instead, but it's cloud based and values are updated with a delay of 5/10 minutes.