kicad_outputs.yml

name: Kicad - production files generator

concurrency:
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

on:
  push:
    paths:
      - '**.kicad_pcb'
      - '**.kicad_sch'
      - '**.kicad_pro'
      - '**.yml'
      - 'doc/assets'
  workflow_dispatch:
  
env:
  schema: "hw/sch_pcb/${{ github.event.repository.name }}.kicad_sch"
  board: "hw/sch_pcb/${{ github.event.repository.name }}.kicad_pcb"
  project: ${{ github.event.repository.name }}
  branch: ${{ github.head_ref || github.ref_name }}
  dir: "hw/out"
  kibot: "doc/assets/kibot"

jobs:
  ERC:
    runs-on: ubuntu-latest
    continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/erc.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}
          
          
  DRC:
    runs-on: ubuntu-latest
    continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/drc.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}
          
          
  schematics:
    runs-on: ubuntu-latest
    continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/schematics.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_docs

      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_sch
          path: ${{ env.dir }}_docs/**
          
  placement:
    name: "Placement and XML"
    runs-on: ubuntu-latest
    #continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/placement.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_docs
        
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/xml.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_docs
          
      - name: "Rename output"
        run: |
          for file in $(find ${{env.dir}} -type f); do sudo mv "${file}" "${file//${{env.project}}/${{env.branch}}}" ; done
          for file in $(find ${{env.dir}}_docs -type f); do sudo mv "${file}" "${file//${{env.project}}/${{env.branch}}}" ; done
          
      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_xml
          path: hw/sch_pcb/*.xml

      # Zde se zahazuji debugovaci videa
      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_placement
          path: |
            ${{ env.dir }}_docs/**/*.pdf
            ${{ env.dir }}_docs/**/*.svg
            ${{ env.dir }}_docs/**/*.csv

  report:
    runs-on: ubuntu-latest
    #continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/report.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_report
        
      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_report
          path: ${{ env.dir }}_report/


  ibom:
    runs-on: ubuntu-latest
    continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/ibom.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_ibom
          
      - name: "Rename output"
        run: for file in $(find ${{env.dir}} -type f); do sudo mv "${file}" "${file//${{env.project}}/${{env.branch}}}" ; done
        
      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_ibom
          path: ${{ env.dir }}_ibom/


# fabrications
  gerbers:
    name: "Fabrication: Gerebrs, Drill and PnP"
    runs-on: ubuntu-latest
    continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7        
        with:
          config: ${{ env.kibot }}/gerbers.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_gerbers
          verbose: 3

      - name: "Rename output"
        run: for file in $(find ${{env.dir}}_gerbers -type f); do sudo mv "${file}" "${file//${{env.project}}/${{env.branch}}}" || true ; done
          
      - uses: actions/upload-artifact@v2
        if: ${{ success() }}
        with:
          name: hw_cam_profi
          path: ${{ env.dir }}_gerbers/gerbers/**


  graphics:
    name: "CAD and render"
    runs-on: ubuntu-latest
    #continue-on-error: true
    steps:
      - uses: actions/checkout@v3
        with:
          submodules: recursive
          token: ${{ secrets.pat }}
          ref: ${{ github.head_ref }}
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/cad.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_cad
          
      - uses: INTI-CMNB/KiBot@v2_dk7
        with:
          config: ${{ env.kibot }}/render.kibot.yaml
          schema: ${{ env.schema }}
          board: ${{ env.board }}
          dir: ${{ env.dir }}_img
          verbose: 3

      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_cad
          path: ${{ env.dir }}_cad/**
          
      - uses: actions/upload-artifact@v3
        if: ${{ success() }}
        with:
          name: doc_img
          path: ${{ env.dir }}_img/img/**


  UPDATE_REPO:
    runs-on: ubuntu-latest
    name: Update repository
    needs: [graphics, gerbers, schematics, placement, report, ibom]
    steps:
    - uses: actions/checkout@v3
      with:
        ref: ${{ github.head_ref }}
        token: ${{ secrets.pat }}

    - run: |
        git pull --force --rebase || true
        git submodule update --remote || true

    - name: Download a Build Artifact
      uses: actions/download-artifact@v3.0.0
    
    - name: Remove old manufarturing data
      run: | 
        rm -r hw/cam_profi || true
        rm -r doc/gen || true
    
    - name: Extract to right position
      run: |
    
        mkdir doc || true
        mkdir doc/gen || true
        mkdir doc/gen/img || true
        mkdir doc/img || true
        mkdir doc/img/render || true
        mkdir hw || true
        mkdir hw/cam_profi || true
        mkdir hw/cam_profi/gbr || true
        mkdir hw/cam_profi/PnP || true
        mkdir hw/cam_profi/ibom || true
                
        cp -r doc_img/* doc/gen/img || true
        cp -r doc_cad/cad/* doc/gen || true
        mv -r hw_cam_profi/PnP/* hw/cam_profi/PnP || true
        cp -r hw_cam_profi/* hw/cam_profi/gbr || true
        cp -r doc_sch/docs/* doc/gen || true
        cp -r doc_xml/* hw/cam_profi || true
        cp -r doc_sch/img/pcb/* doc/gen/img || true
        cp -r doc_placement/doc* hw/cam_profi || true
        cp -r doc_report/* doc/gen || true
        cp -r doc_ibom/docs/* hw/cam_profi/ibom || true

        rm -r doc_img || true
        rm -r doc_cad || true
        rm -r hw_cam_profi || true
        rm -r doc_sch || true
        rm -r doc_placement || true
        rm -r doc_xml || true
        rm -r doc_report || true
        rm -r doc_ibom || true
        
        tree
        
        git add . -f
        
    - uses: stefanzweifel/git-auto-commit-action@v4.16.0
      with:
        commit_message: Update actions products
        add_options: '-A -f'