Need to upgrade from old version

[rhenry74]

I have these working for version 1.2.8

Arduino_ESP32RGBPanel *bus = new Arduino_ESP32RGBPanel(
  GFX_NOT_DEFINED /* CS */, GFX_NOT_DEFINED /* SCK */, GFX_NOT_DEFINED /* SDA */,
  41 /* DE */, 40 /* VSYNC */, 39 /* HSYNC */, 0 /* PCLK */,
  14 /* R0 */, 21 /* R1 */, 47 /* R2 */, 48 /* R3 */, 45 /* R4 */,
  9 /* G0 */, 46 /* G1 */, 3 /* G2 */, 8 /* G3 */, 16 /* G4 */, 1 /* G5 */,
  15 /* B0 */, 7 /* B1 */, 6 /* B2 */, 5 /* B3 */, 4 /* B4 */
);

// option 1:
// 7寸 50PIN 800*480
Arduino_RPi_DPI_RGBPanel *lcd = new Arduino_RPi_DPI_RGBPanel(
  bus,
  800 /* width */, 1 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 40 /* hsync_back_porch */,
  480 /* height */, 1 /* vsync_polarity */, 13 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 31 /* vsync_back_porch */,
  1 /* pclk_active_neg */, 16000000 /* prefer_speed */, true /* auto_flush */);

I would like to upgrade to version 1.3.1 so I can use Arduino_Sprite

The board is Elecrow 7.0 https://www.elecrow.com/esp32-display-7-inch-hmi-display-rgb-tft-lcd-touch-screen-support-lvgl.html

Any help appreciated....

[moononournation]

you may start from latest PDQgraphicstest.ino example first.