Connecting TL021WVC02CT-B1323B via SPI to ESP-WROOM-32

[brightproject]

I have a 2.1 inch display on the ST7701controller

pinout

I also have an esp-wroom-32, its pinout is like this

Can I connect this display to this microcontroller via 3-SPI?
Or only via 4-SPI or RGB interface?

I found the only file in this library that seems to work with the display controller ST7701
But here the connection is via the RGB interface.

https://github.com/moononournation/Arduino_GFX/blob/master/src/display/Arduino_RGB_Display.h

The configuration of my equipment that I described above is available to me now.

In general, I have an esp32-s3-16nr8 and in the future I plan to make a printed circuit board with an RGB connection, but now I wanted to try working with this display with an old esp32 microcontroller.

In a simple example

Arduino_GFX/examples/HelloWorld/HelloWorld.ino

Line 8 in b3d1908

* ESP32 various dev board : CS: 5, DC: 27, RST: 33, BL: 22, SCK: 18, MOSI: 23, MISO: nil

I didn't understand how to set my pins for the display, or are they hardcoded in the code and I need to connect/solder the contacts as indicated in the commented line?