- 1x This PCB (contains top and bottom plates and main PCB)
- 1x Pro Micro, Elite-C, or any clone with identical pinout
- 4x M2 Standoffs, 12~14mm
- 8x M2 screws for the standoffs
- 20x Diodes, 1N4148
- 17-20x Cherry MX compatible switches, depending on layout
- 0-3x Cherry MX PCB-mount stabilizers, depending on layout
- 1x 6x6mm push button for reset
- 4x Rubber adhesive feet
- Keycaps to cover the numpad
- USB cable
- Break the PCB apart into top, bottom, and electrical PCBs carefully.
- Solder the diodes onto the PCB.
- Solder the Pro Micro headers and reset button onto the PCB.
- Install stabilizers to the PCB if necessary.
- Clip the corner switches into the top plate, and attach the plate/switch setup onto the PCB.
- Solder switches onto the PCB.
- Solder the Pro Micro onto the headers.
- At this stage, double-check all solder joints and flash firmware.
- Screw the standoffs on each corner of the top plate.
- Screw the bottom plate onto the rest.
- Tack on the rubber feet.
- Mount keycaps. Enjoy!
For beginners:
- Use QMK Configurator
For experts:
Using QMK Toolbox is recommended.
SpaceCat Design:
