innova2_xdma_stream.tcl

#*****************************************************************************************
# Vivado (TM) v2022.2 (64-bit)
#
# innova2_xdma_stream.tcl: Tcl script for re-creating project 'innova2_xdma_stream'
#
# Generated by Vivado on Tue Aug 08 05:28:55 UTC 2023
# IP Build 3669848 on Fri Oct 14 08:30:02 MDT 2022
#
# This file contains the Vivado Tcl commands for re-creating the project to the state*
# when this script was generated. In order to re-create the project, please source this
# file in the Vivado Tcl Shell.
#
# * Note that the runs in the created project will be configured the same way as the
#   original project, however they will not be launched automatically. To regenerate the
#   run results please launch the synthesis/implementation runs as needed.
#
#*****************************************************************************************
# NOTE: In order to use this script for source control purposes, please make sure that the
#       following files are added to the source control system:-
#
# 1. This project restoration tcl script (innova2_xdma_stream.tcl) that was generated.
#
# 2. The following source(s) files that were local or imported into the original project.
#    (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
#
#    "constraints.xdc"
#
# 3. The following remote source files that were added to the original project:-
#
#    <none>
#
#*****************************************************************************************

# Check file required for this script exists
proc checkRequiredFiles { origin_dir} {
  set status true
  set files [list \
 "[file normalize "$origin_dir/constraints.xdc"]"\
  ]
  foreach ifile $files {
    if { ![file isfile $ifile] } {
      puts " Could not find local file $ifile "
      set status false
    }
  }

  return $status
}
# Set the reference directory for source file relative paths (by default the value is script directory path)
set origin_dir "."

# Use origin directory path location variable, if specified in the tcl shell
if { [info exists ::origin_dir_loc] } {
  set origin_dir $::origin_dir_loc
}

# Set the project name
set _xil_proj_name_ "innova2_xdma_stream"

# Use project name variable, if specified in the tcl shell
if { [info exists ::user_project_name] } {
  set _xil_proj_name_ $::user_project_name
}

variable script_file
set script_file "innova2_xdma_stream.tcl"

# Help information for this script
proc print_help {} {
  variable script_file
  puts "\nDescription:"
  puts "Recreate a Vivado project from this script. The created project will be"
  puts "functionally equivalent to the original project for which this script was"
  puts "generated. The script contains commands for creating a project, filesets,"
  puts "runs, adding/importing sources and setting properties on various objects.\n"
  puts "Syntax:"
  puts "$script_file"
  puts "$script_file -tclargs \[--origin_dir <path>\]"
  puts "$script_file -tclargs \[--project_name <name>\]"
  puts "$script_file -tclargs \[--help\]\n"
  puts "Usage:"
  puts "Name                   Description"
  puts "-------------------------------------------------------------------------"
  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
  puts "                       origin_dir path value is \".\", otherwise, the value"
  puts "                       that was set with the \"-paths_relative_to\" switch"
  puts "                       when this script was generated.\n"
  puts "\[--project_name <name>\] Create project with the specified name. Default"
  puts "                       name is the name of the project from where this"
  puts "                       script was generated.\n"
  puts "\[--help\]               Print help information for this script"
  puts "-------------------------------------------------------------------------\n"
  exit 0
}

if { $::argc > 0 } {
  for {set i 0} {$i < $::argc} {incr i} {
    set option [string trim [lindex $::argv $i]]
    switch -regexp -- $option {
      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
      "--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
      "--help"         { print_help }
      default {
        if { [regexp {^-} $option] } {
          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
          return 1
        }
      }
    }
  }
}

# Set the directory path for the original project from where this script was exported
set orig_proj_dir "[file normalize "$origin_dir/innova2_xdma_stream"]"

# Check for paths and files needed for project creation
set validate_required 0
if { $validate_required } {
  if { [checkRequiredFiles $origin_dir] } {
    puts "Tcl file $script_file is valid. All files required for project creation is accesable. "
  } else {
    puts "Tcl file $script_file is not valid. Not all files required for project creation is accesable. "
    return
  }
}

# Create project
create_project ${_xil_proj_name_} ./${_xil_proj_name_} -part xcku15p-ffve1517-2-i

# Set the directory path for the new project
set proj_dir [get_property directory [current_project]]

# Set project properties
set obj [current_project]
set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
set_property -name "enable_resource_estimation" -value "0" -objects $obj
set_property -name "enable_vhdl_2008" -value "1" -objects $obj
set_property -name "ip_cache_permissions" -value "read write" -objects $obj
set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj
set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
set_property -name "part" -value "xcku15p-ffve1517-2-i" -objects $obj
set_property -name "revised_directory_structure" -value "1" -objects $obj
set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
set_property -name "simulator_language" -value "Mixed" -objects $obj
set_property -name "sim_compile_state" -value "1" -objects $obj
set_property -name "xpm_libraries" -value "XPM_CDC XPM_FIFO XPM_MEMORY" -objects $obj

# Create 'sources_1' fileset (if not found)
if {[string equal [get_filesets -quiet sources_1] ""]} {
  create_fileset -srcset sources_1
}

# Set 'sources_1' fileset object
set obj [get_filesets sources_1]
# Set 'sources_1' fileset file properties for remote files
# None

# Set 'sources_1' fileset file properties for local files
# None

# Set 'sources_1' fileset properties
set obj [get_filesets sources_1]
set_property -name "top" -value "xdma_stream_wrapper" -objects $obj

# Create 'constrs_1' fileset (if not found)
if {[string equal [get_filesets -quiet constrs_1] ""]} {
  create_fileset -constrset constrs_1
}

# Set 'constrs_1' fileset object
set obj [get_filesets constrs_1]

# Add/Import constrs file and set constrs file properties
set file "[file normalize "$origin_dir/constraints.xdc"]"
set file_imported [import_files -fileset constrs_1 [list $file]]
set file "constraints.xdc"
set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
set_property -name "file_type" -value "XDC" -objects $file_obj

# Set 'constrs_1' fileset properties
set obj [get_filesets constrs_1]
set_property -name "target_part" -value "xcku15p-ffve1517-2-i" -objects $obj

# Create 'sim_1' fileset (if not found)
if {[string equal [get_filesets -quiet sim_1] ""]} {
  create_fileset -simset sim_1
}

# Set 'sim_1' fileset object
set obj [get_filesets sim_1]
# Empty (no sources present)

# Set 'sim_1' fileset properties
set obj [get_filesets sim_1]
set_property -name "top" -value "xdma_stream_wrapper" -objects $obj
set_property -name "top_lib" -value "xil_defaultlib" -objects $obj

# Set 'utils_1' fileset object
set obj [get_filesets utils_1]
# Empty (no sources present)

# Set 'utils_1' fileset properties
set obj [get_filesets utils_1]


# Adding sources referenced in BDs, if not already added


# Proc to create BD xdma_stream
proc cr_bd_xdma_stream { parentCell } {

  # CHANGE DESIGN NAME HERE
  set design_name xdma_stream

  common::send_gid_msg -ssname BD::TCL -id 2010 -severity "INFO" "Currently there is no design <$design_name> in project, so creating one..."

  create_bd_design $design_name

  set bCheckIPsPassed 1
  ##################################################################
  # CHECK IPs
  ##################################################################
  set bCheckIPs 1
  if { $bCheckIPs == 1 } {
     set list_check_ips "\ 
  xilinx.com:ip:axi_bram_ctrl:4.1\
  xilinx.com:ip:blk_mem_gen:8.4\
  xilinx.com:ip:axi_gpio:2.0\
  xilinx.com:ip:axis_broadcaster:1.1\
  xilinx.com:ip:axis_dwidth_converter:1.1\
  xilinx.com:ip:c_counter_binary:12.0\
  xilinx.com:ip:floating_point:7.1\
  xilinx.com:ip:jtag_axi:1.2\
  xilinx.com:ip:smartconnect:1.0\
  xilinx.com:ip:util_ds_buf:2.2\
  xilinx.com:ip:xdma:4.1\
  xilinx.com:ip:xlslice:1.0\
  "

   set list_ips_missing ""
   common::send_gid_msg -ssname BD::TCL -id 2011 -severity "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."

   foreach ip_vlnv $list_check_ips {
      set ip_obj [get_ipdefs -all $ip_vlnv]
      if { $ip_obj eq "" } {
         lappend list_ips_missing $ip_vlnv
      }
   }

   if { $list_ips_missing ne "" } {
      catch {common::send_gid_msg -ssname BD::TCL -id 2012 -severity "ERROR" "The following IPs are not found in the IP Catalog:\n  $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
      set bCheckIPsPassed 0
   }

  }

  if { $bCheckIPsPassed != 1 } {
    common::send_gid_msg -ssname BD::TCL -id 2023 -severity "WARNING" "Will not continue with creation of design due to the error(s) above."
    return 3
  }

  variable script_folder

  if { $parentCell eq "" } {
     set parentCell [get_bd_cells /]
  }

  # Get object for parentCell
  set parentObj [get_bd_cells $parentCell]
  if { $parentObj == "" } {
     catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
     return
  }

  # Make sure parentObj is hier blk
  set parentType [get_property TYPE $parentObj]
  if { $parentType ne "hier" } {
     catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
     return
  }

  # Save current instance; Restore later
  set oldCurInst [current_bd_instance .]

  # Set parent object as current
  current_bd_instance $parentObj


  # Create interface ports
  set diff_clock_rtl_0 [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:diff_clock_rtl:1.0 diff_clock_rtl_0 ]
  set_property -dict [ list \
   CONFIG.FREQ_HZ {100000000} \
   ] $diff_clock_rtl_0

  set pcie_7x_mgt_rtl_0 [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:pcie_7x_mgt_rtl:1.0 pcie_7x_mgt_rtl_0 ]


  # Create ports
  set Dout_0 [ create_bd_port -dir O -from 0 -to 0 Dout_0 ]
  set gpio_io_o_0 [ create_bd_port -dir O -from 0 -to 0 gpio_io_o_0 ]
  set reset_rtl_0 [ create_bd_port -dir I -type rst reset_rtl_0 ]
  set_property -dict [ list \
   CONFIG.POLARITY {ACTIVE_LOW} \
 ] $reset_rtl_0

  # Create instance: axi_bram_ctrl_0, and set properties
  set axi_bram_ctrl_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_bram_ctrl:4.1 axi_bram_ctrl_0 ]
  set_property -dict [list \
    CONFIG.DATA_WIDTH {256} \
    CONFIG.SINGLE_PORT_BRAM {1} \
  ] $axi_bram_ctrl_0


  # Create instance: axi_bram_ctrl_0_bram, and set properties
  set axi_bram_ctrl_0_bram [ create_bd_cell -type ip -vlnv xilinx.com:ip:blk_mem_gen:8.4 axi_bram_ctrl_0_bram ]
  set_property CONFIG.PRIM_type_to_Implement {URAM} $axi_bram_ctrl_0_bram


  # Create instance: axi_gpio_0, and set properties
  set axi_gpio_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_gpio_0 ]
  set_property -dict [list \
    CONFIG.C_ALL_OUTPUTS {1} \
    CONFIG.C_GPIO_WIDTH {1} \
  ] $axi_gpio_0


  # Create instance: axis_broadcaster_0, and set properties
  set axis_broadcaster_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_broadcaster:1.1 axis_broadcaster_0 ]

  # Create instance: axis_dwidth_converter_0, and set properties
  set axis_dwidth_converter_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_dwidth_converter:1.1 axis_dwidth_converter_0 ]
  set_property -dict [list \
    CONFIG.M_TDATA_NUM_BYTES {4} \
    CONFIG.S_TDATA_NUM_BYTES {32} \
  ] $axis_dwidth_converter_0


  # Create instance: axis_dwidth_converter_1, and set properties
  set axis_dwidth_converter_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_dwidth_converter:1.1 axis_dwidth_converter_1 ]
  set_property -dict [list \
    CONFIG.M_TDATA_NUM_BYTES {32} \
    CONFIG.S_TDATA_NUM_BYTES {4} \
  ] $axis_dwidth_converter_1


  # Create instance: c_counter_binary_0, and set properties
  set c_counter_binary_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:c_counter_binary:12.0 c_counter_binary_0 ]
  set_property CONFIG.Output_Width {30} $c_counter_binary_0


  # Create instance: floating_point_0, and set properties
  set floating_point_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:floating_point:7.1 floating_point_0 ]
  set_property -dict [list \
    CONFIG.C_Latency {7} \
    CONFIG.C_Mult_Usage {Max_Usage} \
    CONFIG.C_Rate {1} \
    CONFIG.C_Result_Exponent_Width {8} \
    CONFIG.C_Result_Fraction_Width {24} \
    CONFIG.Operation_Type {Multiply} \
    CONFIG.Result_Precision_Type {Single} \
  ] $floating_point_0


  # Create instance: jtag_axi_0, and set properties
  set jtag_axi_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:jtag_axi:1.2 jtag_axi_0 ]

  # Create instance: smartconnect_0, and set properties
  set smartconnect_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:smartconnect:1.0 smartconnect_0 ]
  set_property CONFIG.NUM_MI {2} $smartconnect_0


  # Create instance: util_ds_buf, and set properties
  set util_ds_buf [ create_bd_cell -type ip -vlnv xilinx.com:ip:util_ds_buf:2.2 util_ds_buf ]
  set_property CONFIG.C_BUF_TYPE {IBUFDSGTE} $util_ds_buf


  # Create instance: xdma_0, and set properties
  set xdma_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xdma:4.1 xdma_0 ]
  set_property -dict [list \
    CONFIG.axilite_master_en {true} \
    CONFIG.cfg_mgmt_if {false} \
    CONFIG.pf0_base_class_menu {Memory_controller} \
    CONFIG.pf0_sub_class_interface_menu {Other_memory_controller} \
    CONFIG.pl_link_cap_max_link_speed {8.0_GT/s} \
    CONFIG.pl_link_cap_max_link_width {X8} \
    CONFIG.xdma_axi_intf_mm {AXI_Stream} \
    CONFIG.xdma_axilite_slave {false} \
    CONFIG.xdma_rnum_chnl {2} \
    CONFIG.xdma_wnum_chnl {2} \
  ] $xdma_0


  # Create instance: xlslice_0, and set properties
  set xlslice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 xlslice_0 ]
  set_property -dict [list \
    CONFIG.DIN_FROM {29} \
    CONFIG.DIN_TO {29} \
    CONFIG.DIN_WIDTH {30} \
  ] $xlslice_0


  # Create interface connections
  connect_bd_intf_net -intf_net axi_bram_ctrl_0_BRAM_PORTA [get_bd_intf_pins axi_bram_ctrl_0/BRAM_PORTA] [get_bd_intf_pins axi_bram_ctrl_0_bram/BRAM_PORTA]
  connect_bd_intf_net -intf_net axis_broadcaster_0_M00_AXIS [get_bd_intf_pins axis_broadcaster_0/M00_AXIS] [get_bd_intf_pins floating_point_0/S_AXIS_A]
  connect_bd_intf_net -intf_net axis_broadcaster_0_M01_AXIS [get_bd_intf_pins axis_broadcaster_0/M01_AXIS] [get_bd_intf_pins floating_point_0/S_AXIS_B]
  connect_bd_intf_net -intf_net axis_dwidth_converter_0_M_AXIS [get_bd_intf_pins axis_broadcaster_0/S_AXIS] [get_bd_intf_pins axis_dwidth_converter_0/M_AXIS]
  connect_bd_intf_net -intf_net axis_dwidth_converter_1_M_AXIS [get_bd_intf_pins axis_dwidth_converter_1/M_AXIS] [get_bd_intf_pins xdma_0/S_AXIS_C2H_0]
  connect_bd_intf_net -intf_net diff_clock_rtl_0_1 [get_bd_intf_ports diff_clock_rtl_0] [get_bd_intf_pins util_ds_buf/CLK_IN_D]
  connect_bd_intf_net -intf_net floating_point_0_M_AXIS_RESULT [get_bd_intf_pins axis_dwidth_converter_1/S_AXIS] [get_bd_intf_pins floating_point_0/M_AXIS_RESULT]
  connect_bd_intf_net -intf_net jtag_axi_0_M_AXI [get_bd_intf_pins jtag_axi_0/M_AXI] [get_bd_intf_pins smartconnect_0/S01_AXI]
  connect_bd_intf_net -intf_net smartconnect_0_M00_AXI [get_bd_intf_pins axi_bram_ctrl_0/S_AXI] [get_bd_intf_pins smartconnect_0/M00_AXI]
  connect_bd_intf_net -intf_net smartconnect_0_M01_AXI [get_bd_intf_pins axi_gpio_0/S_AXI] [get_bd_intf_pins smartconnect_0/M01_AXI]
  connect_bd_intf_net -intf_net xdma_0_M_AXIS_H2C_0 [get_bd_intf_pins axis_dwidth_converter_0/S_AXIS] [get_bd_intf_pins xdma_0/M_AXIS_H2C_0]
  connect_bd_intf_net -intf_net xdma_0_M_AXIS_H2C_1 [get_bd_intf_pins xdma_0/M_AXIS_H2C_1] [get_bd_intf_pins xdma_0/S_AXIS_C2H_1]
  connect_bd_intf_net -intf_net xdma_0_M_AXI_LITE [get_bd_intf_pins smartconnect_0/S00_AXI] [get_bd_intf_pins xdma_0/M_AXI_LITE]
  connect_bd_intf_net -intf_net xdma_0_pcie_mgt [get_bd_intf_ports pcie_7x_mgt_rtl_0] [get_bd_intf_pins xdma_0/pcie_mgt]

  # Create port connections
  connect_bd_net -net axi_gpio_0_gpio_io_o [get_bd_ports gpio_io_o_0] [get_bd_pins axi_gpio_0/gpio_io_o]
  connect_bd_net -net c_counter_binary_0_Q [get_bd_pins c_counter_binary_0/Q] [get_bd_pins xlslice_0/Din]
  connect_bd_net -net reset_rtl_0_1 [get_bd_ports reset_rtl_0] [get_bd_pins xdma_0/sys_rst_n]
  connect_bd_net -net util_ds_buf_IBUF_DS_ODIV2 [get_bd_pins util_ds_buf/IBUF_DS_ODIV2] [get_bd_pins xdma_0/sys_clk]
  connect_bd_net -net util_ds_buf_IBUF_OUT [get_bd_pins util_ds_buf/IBUF_OUT] [get_bd_pins xdma_0/sys_clk_gt]
  connect_bd_net -net xdma_0_axi_aclk [get_bd_pins axi_bram_ctrl_0/s_axi_aclk] [get_bd_pins axi_gpio_0/s_axi_aclk] [get_bd_pins axis_broadcaster_0/aclk] [get_bd_pins axis_dwidth_converter_0/aclk] [get_bd_pins axis_dwidth_converter_1/aclk] [get_bd_pins c_counter_binary_0/CLK] [get_bd_pins floating_point_0/aclk] [get_bd_pins jtag_axi_0/aclk] [get_bd_pins smartconnect_0/aclk] [get_bd_pins xdma_0/axi_aclk]
  connect_bd_net -net xdma_0_axi_aresetn [get_bd_pins axi_bram_ctrl_0/s_axi_aresetn] [get_bd_pins axi_gpio_0/s_axi_aresetn] [get_bd_pins axis_broadcaster_0/aresetn] [get_bd_pins axis_dwidth_converter_0/aresetn] [get_bd_pins axis_dwidth_converter_1/aresetn] [get_bd_pins jtag_axi_0/aresetn] [get_bd_pins smartconnect_0/aresetn] [get_bd_pins xdma_0/axi_aresetn]
  connect_bd_net -net xlslice_0_Dout [get_bd_ports Dout_0] [get_bd_pins xlslice_0/Dout]

  # Create address segments
  assign_bd_address -offset 0x00000000 -range 0x00200000 -target_address_space [get_bd_addr_spaces jtag_axi_0/Data] [get_bd_addr_segs axi_bram_ctrl_0/S_AXI/Mem0] -force
  assign_bd_address -offset 0x40000000 -range 0x00010000 -target_address_space [get_bd_addr_spaces jtag_axi_0/Data] [get_bd_addr_segs axi_gpio_0/S_AXI/Reg] -force
  assign_bd_address -offset 0x00000000 -range 0x00200000 -target_address_space [get_bd_addr_spaces xdma_0/M_AXI_LITE] [get_bd_addr_segs axi_bram_ctrl_0/S_AXI/Mem0] -force
  assign_bd_address -offset 0x40000000 -range 0x00010000 -target_address_space [get_bd_addr_spaces xdma_0/M_AXI_LITE] [get_bd_addr_segs axi_gpio_0/S_AXI/Reg] -force

  # Perform GUI Layout
  regenerate_bd_layout -layout_string {
   "ActiveEmotionalView":"Default View",
   "Default View_ScaleFactor":"0.502744",
   "Default View_TopLeft":"-155,-171",
   "ExpandedHierarchyInLayout":"",
   "guistr":"# # String gsaved with Nlview 7.0r4  2019-12-20 bk=1.5203 VDI=41 GEI=36 GUI=JA:10.0 TLS
#  -string -flagsOSRD
preplace port pcie_7x_mgt_rtl_0 -pg 1 -lvl 9 -x 2440 -y 160 -defaultsOSRD
preplace port diff_clock_rtl_0 -pg 1 -lvl 0 -x 0 -y 270 -defaultsOSRD
preplace port port-id_reset_rtl_0 -pg 1 -lvl 0 -x 0 -y 340 -defaultsOSRD
preplace portBus gpio_io_o_0 -pg 1 -lvl 9 -x 2440 -y 90 -defaultsOSRD
preplace portBus Dout_0 -pg 1 -lvl 9 -x 2440 -y 380 -defaultsOSRD
preplace inst xdma_0 -pg 1 -lvl 5 -x 1390 -y 190 -defaultsOSRD
preplace inst util_ds_buf -pg 1 -lvl 4 -x 1030 -y 270 -defaultsOSRD
preplace inst axis_dwidth_converter_0 -pg 1 -lvl 1 -x 140 -y 90 -defaultsOSRD
preplace inst axis_dwidth_converter_1 -pg 1 -lvl 4 -x 1030 -y 140 -defaultsOSRD
preplace inst axis_broadcaster_0 -pg 1 -lvl 2 -x 430 -y 110 -defaultsOSRD
preplace inst floating_point_0 -pg 1 -lvl 3 -x 730 -y 120 -defaultsOSRD
preplace inst axi_gpio_0 -pg 1 -lvl 7 -x 2050 -y 80 -defaultsOSRD
preplace inst smartconnect_0 -pg 1 -lvl 6 -x 1750 -y 250 -defaultsOSRD
preplace inst jtag_axi_0 -pg 1 -lvl 5 -x 1390 -y 430 -defaultsOSRD
preplace inst axi_bram_ctrl_0 -pg 1 -lvl 7 -x 2050 -y 260 -defaultsOSRD
preplace inst axi_bram_ctrl_0_bram -pg 1 -lvl 8 -x 2310 -y 260 -defaultsOSRD
preplace inst c_counter_binary_0 -pg 1 -lvl 7 -x 2050 -y 380 -defaultsOSRD
preplace inst xlslice_0 -pg 1 -lvl 8 -x 2310 -y 380 -defaultsOSRD
preplace netloc reset_rtl_0_1 1 0 5 30J 190 250J 30 NJ 30 NJ 30 1180J
preplace netloc util_ds_buf_IBUF_OUT 1 4 1 1220 200n
preplace netloc util_ds_buf_IBUF_DS_ODIV2 1 4 1 1210 180n
preplace netloc xdma_0_axi_aclk 1 0 7 20 170 260 190 590 200 870 50 1190 20 1610 80 1910
preplace netloc xdma_0_axi_aresetn 1 0 7 30 180 270 210 NJ 210 880 60 1200 30 1590 100 1890
preplace netloc axi_gpio_0_gpio_io_o 1 7 2 NJ 90 NJ
preplace netloc c_counter_binary_0_Q 1 7 1 NJ 380
preplace netloc xlslice_0_Dout 1 8 1 NJ 380
preplace netloc xdma_0_pcie_mgt 1 5 4 NJ 160 NJ 160 NJ 160 NJ
preplace netloc diff_clock_rtl_0_1 1 0 4 NJ 270 NJ 270 NJ 270 NJ
preplace netloc xdma_0_M_AXIS_H2C_1 1 4 2 1220 40 1560
preplace netloc xdma_0_M_AXIS_H2C_0 1 0 6 20 10 NJ 10 NJ 10 NJ 10 NJ 10 1570
preplace netloc axis_dwidth_converter_1_M_AXIS 1 4 1 N 140
preplace netloc axis_dwidth_converter_0_M_AXIS 1 1 1 N 90
preplace netloc axis_broadcaster_0_M00_AXIS 1 2 1 N 100
preplace netloc axis_broadcaster_0_M01_AXIS 1 2 1 N 120
preplace netloc floating_point_0_M_AXIS_RESULT 1 3 1 N 120
preplace netloc jtag_axi_0_M_AXI 1 5 1 1600 240n
preplace netloc xdma_0_M_AXI_LITE 1 5 1 1580 100n
preplace netloc smartconnect_0_M01_AXI 1 6 1 1900 60n
preplace netloc smartconnect_0_M00_AXI 1 6 1 N 240
preplace netloc axi_bram_ctrl_0_BRAM_PORTA 1 7 1 NJ 260
levelinfo -pg 1 0 140 430 730 1030 1390 1750 2050 2310 2440
pagesize -pg 1 -db -bbox -sgen -160 0 2620 500
"
}

  # Restore current instance
  current_bd_instance $oldCurInst

  validate_bd_design
  save_bd_design
  close_bd_design $design_name 
}
# End of cr_bd_xdma_stream()
cr_bd_xdma_stream ""
set_property REGISTERED_WITH_MANAGER "1" [get_files xdma_stream.bd ] 
set_property SYNTH_CHECKPOINT_MODE "Hierarchical" [get_files xdma_stream.bd ] 

#call make_wrapper to create wrapper files
if { [get_property IS_LOCKED [ get_files -norecurse xdma_stream.bd] ] == 1  } {
  import_files -fileset sources_1 [file normalize "${origin_dir}/innova2_xdma_stream/innova2_xdma_stream.gen/sources_1/bd/xdma_stream/hdl/xdma_stream_wrapper.v" ]
} else {
  set wrapper_path [make_wrapper -fileset sources_1 -files [ get_files -norecurse xdma_stream.bd] -top]
  add_files -norecurse -fileset sources_1 $wrapper_path
}


set idrFlowPropertiesConstraints ""
catch {
 set idrFlowPropertiesConstraints [get_param runs.disableIDRFlowPropertyConstraints]
 set_param runs.disableIDRFlowPropertyConstraints 1
}

# Create 'synth_1' run (if not found)
if {[string equal [get_runs -quiet synth_1] ""]} {
    create_run -name synth_1 -part xcku15p-ffve1517-2-i -flow {Vivado Synthesis 2022} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
} else {
  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
  set_property flow "Vivado Synthesis 2022" [get_runs synth_1]
}
set obj [get_runs synth_1]
set_property set_report_strategy_name 1 $obj
set_property report_strategy {Vivado Synthesis Default Reports} $obj
set_property set_report_strategy_name 0 $obj
# Create 'synth_1_synth_report_utilization_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
}
set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
if { $obj != "" } {

}
set obj [get_runs synth_1]
set_property -name "part" -value "xcku15p-ffve1517-2-i" -objects $obj
set_property -name "auto_incremental_checkpoint" -value "1" -objects $obj
set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj

# set the current synth run
current_run -synthesis [get_runs synth_1]

# Create 'impl_1' run (if not found)
if {[string equal [get_runs -quiet impl_1] ""]} {
    create_run -name impl_1 -part xcku15p-ffve1517-2-i -flow {Vivado Implementation 2022} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
} else {
  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
  set_property flow "Vivado Implementation 2022" [get_runs impl_1]
}
set obj [get_runs impl_1]
set_property set_report_strategy_name 1 $obj
set_property report_strategy {Vivado Implementation Default Reports} $obj
set_property set_report_strategy_name 0 $obj
# Create 'impl_1_init_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_opt_report_drc_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
if { $obj != "" } {

}
# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_place_report_io_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
if { $obj != "" } {

}
# Create 'impl_1_place_report_utilization_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
if { $obj != "" } {

}
# Create 'impl_1_place_report_control_sets_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
if { $obj != "" } {
set_property -name "options.verbose" -value "1" -objects $obj

}
# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj

}
# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj

}
# Create 'impl_1_place_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
if { $obj != "" } {
set_property -name "is_enabled" -value "0" -objects $obj
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_route_report_drc_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
if { $obj != "" } {

}
# Create 'impl_1_route_report_methodology_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
if { $obj != "" } {

}
# Create 'impl_1_route_report_power_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
if { $obj != "" } {

}
# Create 'impl_1_route_report_route_status_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
if { $obj != "" } {

}
# Create 'impl_1_route_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
if { $obj != "" } {
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj

}
# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
if { $obj != "" } {

}
# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
if { $obj != "" } {

}
# Create 'impl_1_route_report_bus_skew_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
  create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
if { $obj != "" } {
set_property -name "options.warn_on_violation" -value "1" -objects $obj

}
# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
if { $obj != "" } {
set_property -name "options.max_paths" -value "10" -objects $obj
set_property -name "options.report_unconstrained" -value "1" -objects $obj
set_property -name "options.warn_on_violation" -value "1" -objects $obj

}
# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
  create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
}
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
if { $obj != "" } {
set_property -name "options.warn_on_violation" -value "1" -objects $obj

}
set obj [get_runs impl_1]
set_property -name "part" -value "xcku15p-ffve1517-2-i" -objects $obj
set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj

# set the current impl run
current_run -implementation [get_runs impl_1]
catch {
 if { $idrFlowPropertiesConstraints != {} } {
   set_param runs.disableIDRFlowPropertyConstraints $idrFlowPropertiesConstraints
 }
}

puts "INFO: Project created:${_xil_proj_name_}"
# Create 'drc_1' gadget (if not found)
if {[string equal [get_dashboard_gadgets  [ list "drc_1" ] ] ""]} {
create_dashboard_gadget -name {drc_1} -type drc
}
set obj [get_dashboard_gadgets [ list "drc_1" ] ]
set_property -name "reports" -value "impl_1#impl_1_route_report_drc_0" -objects $obj

# Create 'methodology_1' gadget (if not found)
if {[string equal [get_dashboard_gadgets  [ list "methodology_1" ] ] ""]} {
create_dashboard_gadget -name {methodology_1} -type methodology
}
set obj [get_dashboard_gadgets [ list "methodology_1" ] ]
set_property -name "reports" -value "impl_1#impl_1_route_report_methodology_0" -objects $obj

# Create 'power_1' gadget (if not found)
if {[string equal [get_dashboard_gadgets  [ list "power_1" ] ] ""]} {
create_dashboard_gadget -name {power_1} -type power
}
set obj [get_dashboard_gadgets [ list "power_1" ] ]
set_property -name "reports" -value "impl_1#impl_1_route_report_power_0" -objects $obj

# Create 'timing_1' gadget (if not found)
if {[string equal [get_dashboard_gadgets  [ list "timing_1" ] ] ""]} {
create_dashboard_gadget -name {timing_1} -type timing
}
set obj [get_dashboard_gadgets [ list "timing_1" ] ]
set_property -name "reports" -value "impl_1#impl_1_route_report_timing_summary_0" -objects $obj

# Create 'utilization_1' gadget (if not found)
if {[string equal [get_dashboard_gadgets  [ list "utilization_1" ] ] ""]} {
create_dashboard_gadget -name {utilization_1} -type utilization
}
set obj [get_dashboard_gadgets [ list "utilization_1" ] ]
set_property -name "reports" -value "synth_1#synth_1_synth_report_utilization_0" -objects $obj
set_property -name "run.step" -value "synth_design" -objects $obj
set_property -name "run.type" -value "synthesis" -objects $obj

# Create 'utilization_2' gadget (if not found)
if {[string equal [get_dashboard_gadgets  [ list "utilization_2" ] ] ""]} {
create_dashboard_gadget -name {utilization_2} -type utilization
}
set obj [get_dashboard_gadgets [ list "utilization_2" ] ]
set_property -name "reports" -value "impl_1#impl_1_place_report_utilization_0" -objects $obj

move_dashboard_gadget -name {utilization_1} -row 0 -col 0
move_dashboard_gadget -name {power_1} -row 1 -col 0
move_dashboard_gadget -name {drc_1} -row 2 -col 0
move_dashboard_gadget -name {timing_1} -row 0 -col 1
move_dashboard_gadget -name {utilization_2} -row 1 -col 1
move_dashboard_gadget -name {methodology_1} -row 2 -col 1