tests: zephyr: boards: nrf: i2c: i2c_slave: update pins for LV10

Update to not use P1.11, which is dedicated for SWO.

Signed-off-by: Piotr Kosycarz <[email protected]>

Author: nordic-piks

tests/zephyr/boards/nrf/i2c/i2c_slave/boards/nrf54lv10dk_nrf54lv10a_cpuapp.overlay

@@ -1,7 +1,7 @@
 /*
  * Two loopbacks are required:
  * P1.08 - P1.09
- * P1.10 - P1.11
+ * P1.2 - P1.3
  */
 
 
@@ -15,14 +15,14 @@
 	i2c20_default_alt: i2c20_default_alt {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 8)>,
-				<NRF_PSEL(TWIM_SCL, 1, 10)>;
+				<NRF_PSEL(TWIM_SCL, 1, 2)>;
 		};
 	};
 
 	i2c20_sleep_alt: i2c20_sleep_alt {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 8)>,
-				<NRF_PSEL(TWIM_SCL, 1, 10)>;
+				<NRF_PSEL(TWIM_SCL, 1, 2)>;
 			low-power-enable;
 		};
 	};
@@ -33,15 +33,15 @@
  * to configure pins for TWIS with pinctrl.
  */
 			psels = <NRF_PSEL(TWIM_SDA, 1, 9)>,
-				<NRF_PSEL(TWIM_SCL, 1, 11)>;
+				<NRF_PSEL(TWIM_SCL, 1, 3)>;
 			bias-pull-up;
 		};
 	};
 
 	i2c21_sleep_alt: i2c21_sleep_alt {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 9)>,
-				<NRF_PSEL(TWIM_SCL, 1, 11)>;
+				<NRF_PSEL(TWIM_SCL, 1, 3)>;
 			low-power-enable;
 		};
 	};