update profile

Author: Aelonath

GermanRepRap.page

@@ -25,145 +25,28 @@ Die Bedienung eines 3D Druckers ist kein Hexenwerk. Dennoch ist ein 3D Drucker e
 `config.ini` > import
 
 ```ini
-# generated by PrusaSlicer 2.6.1+win64 on 2023-12-19 at 21:04:20 UTC
 autoemit_temperature_commands = 1
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
 bed_custom_model = 
 bed_custom_texture = 
-bed_shape = 0x0,400x0,400x400,0x400
-bed_temperature = 90
+bed_shape = 0x0,350x0,350x350,0x350
 before_layer_gcode = 
 between_objects_gcode = 
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_fan_speed = 50
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
+binary_gcode = 0
 color_change_gcode = M600
-colorprint_heights = 
-compatible_printers_condition_cummulative = ;"printer_notes!~/.*NO_TEMPLATES.*/ and printer_notes!~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes!~/.*PRINTER_MODEL_MK4IS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and num_extruders>1)"
-complete_objects = 0
-cooling = 1
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
-default_acceleration = 0
 default_filament_profile = 
 default_print_profile = 
 deretract_speed = 0
-disable_fan_first_layers = 3
-dont_support_bridges = 1
-draft_shield = disabled
-duplicate_distance = 6
-elefant_foot_compensation = 0
-enable_dynamic_fan_speeds = 0
-enable_dynamic_overhang_speeds = 0
-end_filament_gcode = "; Filament-specific end gcode"
 end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0.9
-external_perimeter_speed = 50%
-external_perimeters_first = 0
 extra_loading_move = -2
-extra_perimeters = 1
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
 extruder_colour = ""
 extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0.9
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cooling_final_speed = 2
-filament_cooling_initial_speed = 3
-filament_cooling_moves = 1
-filament_cost = 27.82
-filament_density = 1.27
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 14
-filament_loading_speed_start = 19
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 0
-filament_multitool_ramming = 0
-filament_multitool_ramming_flow = 10
-filament_multitool_ramming_volume = 10
-filament_notes = ""
-filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_length_toolchange = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_restart_extra_toolchange = nil
-filament_retract_speed = nil
-filament_settings_id = "Generic PETG @Template"
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PETG
-filament_unload_time = 0
-filament_unloading_speed = 20
-filament_unloading_speed_start = 100
-filament_vendor = Generic
-filament_wipe = nil
-fill_angle = 45
-fill_density = 20%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_bed_temperature = 85
-first_layer_extrusion_width = 0.84
-first_layer_height = 0.5
-first_layer_speed = 30
-first_layer_speed_over_raft = 30
-first_layer_temperature = 230
-full_fan_speed_layer = 5
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 20
-gcode_comments = 0
 gcode_flavor = marlin2
-gcode_label_objects = 0
-gcode_resolution = 0.0125
-gcode_substitutions = 
 high_current_on_filament_swap = 0
 host_type = octoprint
-idle_temperature = nil
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.9
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 80
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
+inherits = 
 layer_gcode = 
-layer_height = 0.5
 machine_limits_usage = time_estimate_only
 machine_max_acceleration_e = 10000,5000
 machine_max_acceleration_extruding = 1500,1250
@@ -182,62 +65,25 @@ machine_max_jerk_y = 10,10
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
-max_fan_speed = 50
 max_layer_height = 0
-max_print_height = 200
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_fan_speed = 30
-min_feature_size = 25%
+max_print_height = 350
 min_layer_height = 0.07
-min_print_speed = 10
-min_skirt_length = 0
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
+multimaterial_purging = 140
 nozzle_diameter = 0.8
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhang_fan_speed_0 = 0
-overhang_fan_speed_1 = 0
-overhang_fan_speed_2 = 0
-overhang_fan_speed_3 = 0
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
+nozzle_high_flow = 0
 parking_pos_retraction = 92
 pause_print_gcode = M601
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.9
-perimeter_generator = arachne
-perimeter_speed = 60
-perimeters = 3
-physical_printer_settings_id = Drucker Brudi
-post_process = 
+prefer_clockwise_movements = 0
 print_host = 
-print_settings_id = Drucker Brudi
 printer_model = 
 printer_notes = 
-printer_settings_id = Drucker Brudi
+printer_settings_id = 
 printer_technology = FFF
 printer_variant = 
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
 remaining_times = 0
-resolution = 0
 retract_before_travel = 2
 retract_before_wipe = 0%
 retract_layer_change = 0
@@ -249,103 +95,22 @@ retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-seam_position = aligned
 silent_mode = 1
 single_extruder_multi_material = 0
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-slowdown_below_layer_time = 10
-small_perimeter_speed = 15
-solid_infill_acceleration = 0
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.9
-solid_infill_speed = 20
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-start_filament_gcode = "; Filament gcode\n"
 start_gcode = G28        ; Home XYZ.\nG29 P1     ; Do automated probing of the bed.\nG29 P3     ; Smart Fill Repeat until all mesh points are filled in, Used to fill unreachable points.\nG29 S0     ; Save UBL mesh points to slot 0 (EEPROM).\nG29 F 20.0 ; Set Fade Height for correction at 10.0 mm.\nG29 A      ; Activate the UBL System.\nM500       ; Save current setup. WARNING - UBL will be active at power up, before any G28.
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.7
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-temperature = 240
 template_custom_gcode = 
-thick_bridges = 1
-thin_walls = 1
-threads = 8
 thumbnails = 
 thumbnails_format = PNG
 toolchange_gcode = 
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.8
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 15
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_acceleration = 0
-travel_speed = 130
-travel_speed_z = 0
+travel_lift_before_obstacle = 0
+travel_max_lift = 0
+travel_ramping_lift = 0
+travel_slope = 0
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
 variable_layer_height = 1
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
 wipe = 0
-wipe_into_infill = 0
-wipe_into_objects = 0
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-wiping_volumes_extruders = 70,70
-wiping_volumes_matrix = 0
-xy_size_compensation = 0
 z_offset = 0
 ```