mor1kx - an OpenRISC processor IP core

The Basics

This repository contains an OpenRISC 1000 compliant processor IP core.

It is written in Verilog HDL.

This repository only contains the IP source code and some documentation. For a verification environment, please see other projects.

Documentation

The documentation is located in the doc/ directory.

It is in asciidoc format, and there's a makefile to build HTML or PDF documentation. To build the HTML documentation, run the following in the doc/ directory:

  $ make html

License

This project is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal (CERN-OHL-W). For details please see the LICENSE file or https:/cern.ch/cern-ohl

SPDX-License-Identifier: CERN-OHL-W-2.0

https://spdx.org/licenses/CERN-OHL-W-2.0.html

Configuration

The mor1kx CPU is very configurable to allow you to customize the core to your exact needs. The following tables explain how each parameter can be configured, what the configuration does and why you might want to use it.

Note: The Usage? field below indicates if a certain application (such as running Linux) requires a setting different than the default value.

Basic parameters

Parameter	Description	Default	Values	Usage?
OPTION_OPERAND_WIDTH	Specify the CPU data and address widths	32	32, 64, etc
OPTION_CPU0	Specify the CPU pipeline core	CAPPUCCINO	CAPPUCCINO ESPRESSO PRONTO_ESPRESSO	CAPPUCCINO for Linux
OPTION_RESET_PC	Specify the program counter upon reset	0x100	n

Caching parameters

Parameter	Description	Default	Values	Usage?
FEATURE_DATACACHE	Enable memory access data caching	NONE	ENABLED NONE
OPTION_DCACHE_BLOCK_WIDTH	Specify the address width of a cache block	5	n
OPTION_DCACHE_SET_WIDTH	Specify the set address width	9	n
OPTION_DCACHE_WAYS	Specify the number of blocks per set	2	n
OPTION_DCACHE_LIMIT_WIDTH	Specify the maximum address width	32	n	31 for Linux to allow uncached device access
OPTION_DCACHE_SNOOP	Enable bus snooping for cache coherency	NONE	ENABLED NONE	Linux SMP
FEATURE_INSTRUCTIONCACHE	Enable memory access instruction caching	NONE	ENABLED NONE
OPTION_ICACHE_BLOCK_WIDTH	Specify the address width of a cache block	5	n
OPTION_ICACHE_SET_WIDTH	Specify the set address width	9	n
OPTION_ICACHE_WAYS	Specify the number of blocks per set	2	n
OPTION_ICACHE_LIMIT_WIDTH	Specify the maximum address width	32	n

Memory Management Unit (MMU) parameters

Parameter	Description	Default	Values	Usage?
FEATURE_DMMU	Enable the data bus MMU	NONE	ENABLED NONE	Linux expects ENABLED
FEATURE_DMMU_HW_TLB_RELOAD	Enable hardware TLB reload	NONE	ENABLED NONE	Linux expects NONE
OPTION_DMMU_SET_WIDTH	Specify the set address width	6	n
OPTION_DMMU_WAYS	Specify the number of ways per set	1	n
FEATURE_IMMU	Enable the instruction bus MMU	NONE	ENABLED NONE	Linux expects ENABLED
FEATURE_IMMU_HW_TLB_RELOAD	Enable hardware TLB reload	NONE	ENABLED NONE	Linux expects NONE
OPTION_IMMU_SET_WIDTH	Specify the set address width	6	n
OPTION_IMMU_WAYS	Specify the number of ways per set	1	n

System bus parameters

Parameter	Description	Default	Values	Usage?
FEATURE_STORE_BUFFER	Enable the load store unit store buffer	ENABLED	ENABLED NONE	Large footprint
OPTION_STORE_BUFFER_DEPTH_WIDTH	Specify the load store unit store buffer depth	8	1-n
BUS_IF_TYPE	Specify the bus interface type	WISHBONE32	WISHBONE32
IBUS_WB_TYPE	Specify the Instruction bus interface type option	B3_READ_BURSTING	B3_READ_BURSTING B3_REGISTERED_FEEDBACK CLASSIC
DBUS_WB_TYPE	Specify the Data bus interface type option	CLASSIC	B3_READ_BURSTING B3_REGISTERED_FEEDBACK CLASSIC

Hardware unit configuration parameters

Parameter	Description	Default	Values	Usage?
FEATURE_TRACEPORT_EXEC	Enable the traceport hardware interface	NONE	ENABLED NONE	Verilator
FEATURE_DEBUGUNIT	Enable hardware breakpoints and advanced debug unit interface	NONE	ENABLED NONE	OpenOCD
FEATURE_PERFCOUNTERS	Enable the performance counters unit	NONE	ENABLED NONE
OPTION_PERFCOUNTERS_NUM	Specify the number of performance counters to generate	0	n
FEATURE_TIMER	Enable the internal OpenRISC timer	ENABLED	ENABLED NONE
FEATURE_PIC	Enable the internal OpenRISC PIC	ENABLED	ENABLED NONE
OPTION_PIC_TRIGGER	Specify the PIC trigger mode	LEVEL	LEVEL EDGE LATCHED_LEVEL
OPTION_PIC_NMI_WIDTH	Specify non maskable interrupts width, starting at 0, these interrupts will not be reset or maskable	0	0-32
OPTION_RF_CLEAR_ON_INIT	Enable clearing all registers on initialization	0	0, 1
OPTION_RF_NUM_SHADOW_GPR	Specify the number of shadow register files	0	0-16	Set >=1 for Linux SMP
OPTION_RF_ADDR_WIDTH	Specify the address width of the register file	5	5
OPTION_RF_WORDS	Specify the number of registers in the register file	32	32
FEATURE_FASTCONTEXTS	Enable fast context switching of register sets	NONE	ENABLED NONE
FEATURE_MULTICORE	Enable the coreid and numcores SPR registers	NONE	ENABLED NONE	Linux SMP
FEATURE_FPU	Enable the FPU, for cappuccino pipeline only	NONE	ENABLED NONE
FEATURE_BRANCH_PREDICTOR	Select the branch predictor implementation	SIMPLE	SIMPLE GSHARE SAT_COUNTER

Note: C/C++ float to integer conversion assumes truncation (rounding toward zero). lf.ftoi.s instruction performes such rouning regardless of rounding mode bits of FPCSR. All other floating point instructions always perform rounding in according with rounding mode bits of FPCSR.

Exception handling options

Parameter	Description	Default	Values	Usage?
FEATURE_DSX	Enable setting the SR[DSX] flag when raising exceptions in a delay slot	ENABLED	ENABLED NONE
FEATURE_RANGE	Enable checking and raising range exceptions	ENABLED	ENABLED NONE
FEATURE_OVERFLOW	Enable checking and raising overflow exceptions	ENABLED	ENABLED NONE

ALU configuration options

Parameter	Description	Default	Values	Usage?
FEATURE_MULTIPLIER	Specify the multiplier implementation	THREESTAGE	THREESTAGE PIPELINED SERIAL SIMULATION NONE
FEATURE_DIVIDER	Specify the divider implementation	SERIAL	SERIAL SIMULATION NONE
OPTION_SHIFTER	Specify the shifter implementation	BARREL	BARREL SERIAL
FEATURE_CARRY_FLAG	Enable checking and setting the carry flag	ENABLED	ENABLED NONE

Instruction enabling options

Parameter	Description	Default	Values	Usage?
FEATURE_MAC	Enable the l.mac* multiply accumulate instructions	NONE	ENABLED NONE
FEATURE_SYSCALL	Enable the 'l.sys` OS syscall instruction	ENABLED	ENABLED NONE
FEATURE_TRAP	Enable the l.trap instruction	ENABLED	ENABLED NONE	GDB
FEATURE_ADDC	Enable the l.addc add with carry flag instruction	ENABLED	ENABLED NONE
FEATURE_SRA	Enable the l.sra shirt right arithmetic instruction	ENABLED	ENABLED NONE
FEATURE_ROR	Enable the l.ror* rotate right instructions	NONE	ENABLED NONE
FEATURE_EXT	Enable the l.ext* sign extend instructions	NONE	ENABLED NONE
FEATURE_CMOV	Enable the l.cmov conditional move instruction	ENABLED	ENABLED NONE
FEATURE_FFL1	Enable the l.f[fl]1 find first/last set bit instructions	ENABLED	ENABLED NONE	Linux
FEATURE_ATOMIC	Enable the l.lwa and l.swa atomic instructions	ENABLED	ENABLED NONE	Linux SMP
FEATURE_CUST1	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST2	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST3	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST4	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST5	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST6	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST7	Enable the l.cust* custom instruction	NONE	ENABLED NONE
FEATURE_CUST8	Enable the l.cust* custom instruction	NONE	ENABLED NONE

Testing and Continuous Integration

A CPU core cannot be trusted without a full set of verification testing. The mor1kx pipelines are constantly verified for correctness with the or1k Continuous Integration (CI) suite. This currently covers:

• source linting - a verilator --lint-only check is run on each commit to ensure there are no code quality issues.

• or1k-tests - the or1k-tests test suite is run against each pipeline to check most major instructions, exception handling, caching, timers, interrupts and other features.

• mor1kx formal - formal-verification tests are run on the cappuccino pipeline to confirm the processor doesn't encounter undesirable states and identify unseen bugs.

  Status:

We would also like to add the following tests to our continuous integration suite, if you would like to volunteer please reach out:

• softfloat, fpu verification (may not be feasable in CI due to long run times)
• CPU pipeline debugging verification via GDB/OpenOCD
• Resource utilization regression with yosys synth_intel synth_xilinx
• Formal verification of ESPRESSO and PRONTO ESPRESSO using yosys-formal.
• Verification that each revision can boot differnt OS's Linux, RTMES
• Golden reference or1ksim trace comparisons vs verilog model using constrained random inputs.

Verification status of mor1kx pipelines:

Pipeline	Testing Support	Comments
CAPPUCCINO	Linting or1k-tests formal-verification	All supported tests passing
ESPRESSO	linting or1k-tests	Still many pipeline failures, see issue #71
PRONTO_ESPRESSO	linting	No toolchain support for no-delayslot c code
MAROCCHINO	linting or1k-tests	See marocchino project.