Replies: 2 comments 4 replies
-
There is something wrong, for sure. What firmware are you running? Do you get the same short range in bootloader mode? Check that the antenna on the crazyradio is attached well. |
Beta Was this translation helpful? Give feedback.
-
I've tested again today and other function is nice and behaving what it supposed to do as long as the Crazyflie is connected to the machine. I succeeded in estimating the geometry for the system with my friend's help. The result has big error margin since I didn't do it properly. We had to move side by side with me holding my laptop and my friend holding the crazyflie. |
Beta Was this translation helpful? Give feedback.
-
Hello, I was trying to estimate geometry for setting up Lighthouse Positioning System. But soon I realize my Crazyradio range is shorter than what its supposed to be. I'm experiencing packet losses when my Crazyflie is away more than 1m from the Crazyradio.
This might help showing what I'm experiencing:
crazyflie.mp4
for higher resolution: https://drive.google.com/file/d/1tkZs-LZP1_8Uz8Lb-SciUg4IZcJ7CUma/view?usp=sharing
My testbed in lab is 4x4 meters room that clear from debris, So I'm sure my Crazyradio has clear line of sight to my Crazyflie. But in the lab there are also wifi modems, 3D printers, and other robotic items... Does this have any effect on my Crazyradio performance?
I tried to google and found this old thread https://forum.bitcraze.io/viewtopic.php?t=4046 where someone is also having shorter range on their Crazyradio.
From one point of the answer there is
Can anyone show me how to do this in cfclient? or is there a new solution for this?
Beta Was this translation helpful? Give feedback.
All reactions