flashing the classification demo still doesn't work

[noahzn]

I updated the firmware to 2022.12, and tried to flash the bootloader again (because my AIdeck is Rev.C). Then I used cfloader to flash the model. The crazyflie rebooted, and...

Reset to bootloader mode...
Could not save cache, no writable directory
Could not save cache, no writable directory
Skipping bcAI:esp, not in the target list
Deck bcAI:gap8, reset to bootloader
| 0% Writing to bcAI:gap8 deck memory

It's always 0%.. please help me. Thanks!

[hmllr]

Hi :)
Does your question #557 mean this is solved? If yes, can you please update here with your solution? If no, I would suggest to update all firmwares again before trying to update the gap8. The STM32, nRF and ESP32 all have to be up to date for this to work. You can find a guide how to do this here: https://www.bitcraze.io/documentation/tutorials/getting-started-with-aideck/
Hope this helps,
Hanna

[noahzn]

Hi, yes! :) I tried about ten times, and it worked once time. I just restarted many times and unplugged the radio several times.. Thank you.

[hmllr]

Good to hear that! Maybe still try to update, it shouldn't take ten tries (there used to be an issue that you needed to wait around 30'' after turning it off for all capacitors to discharge, which led to such behavior, but this is now automatically done in the update, so shouldn't happen anymore).