git clone of wiki fails at windows 11 / Add WLAN USB stick to wiki page

[val-42]

The git clone of wiki "https://github.com/ev3dev/ev3dev.wiki.git" fails at windows 11 with output see end of this notes. Why I would edit the wiki? I got a WLAN USB Stick which works with the Debian Stretch image. So if somebody will do it for me, here are the needed information... Thanks.

Known Working Dongles
0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
This is the LogiLink WL0084A REV.A v.2.0 Nano adapter, similar to the Edimax

lsusb

Linux ev3dev 4.14.117-ev3dev-2.3.5-ev3 #1 PREEMPT Sat Mar 7 12:54:39 CST 2020 armv5tejl
             _____     _
   _____   _|___ /  __| | _____   __
  / _ \ \ / / |_ \ / _` |/ _ \ \ / /
 |  __/\ V / ___) | (_| |  __/\ V /
  \___| \_/ |____/ \__,_|\___| \_/

Debian stretch on LEGO MINDSTORMS EV3!
Last login: Sun Jan 12 18:26:26 2025 from 192.168.135.106
robot@ev3dev:~$ lsusb
Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

git clone issue
Cloning into 'C:/Users/<name>/git/ev3dev.wiki'... POST git-upload-pack (185 bytes) POST git-upload-pack (512 bytes) remote: Enumerating objects: 1784, done. remote: Total 1784 (delta 0), reused 0 (delta 0), pack-reused 1784 (from 1) Receiving objects: 100% (1784/1784), 4.15 MiB | 6.45 MiB/s, done. Resolving deltas: 100% (953/953), done. error: invalid path 'Internals:-ev3dev-stretch.md' fatal: unable to checkout working tree warning: Clone succeeded, but checkout failed. You can inspect what was checked out with 'git status' and retry with 'git restore --source=HEAD :/' Done

[val-42]

Also works for me, but I have only few information about the dongle...

Known Working Dongles
0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
This is the LB-Link 150Mbps 802.11N Nano adapter, similar to the Edimax

[dlech]

Thanks. But this one is actually listed on the officially supported dongles already.

[val-42]

Yes the chipset is already listed there but the distributor LogiLink and the dongle ID isn't listed, so maybe it helps someone...

[dlech]

Ah, I will add that part, thanks.

[val-42]

never mind, just wanted to point it out

[val-42]

thanks

[val-42]

FYI - the USB stick "Edimax EW-7811Un V2" on amazon (DE) didn't works with ev3dev, the are some negative notes on amazon and my test fails also. The chipset is RTL8188EU rev D, the vendor ID is 7392, the product ID B811. Maybe you could add a hint on your wiki page. Thanks.

[dlech]

That one is already mentioned in the "read before you buy" section.