Skip to content

Latest commit

 

History

History
110 lines (93 loc) · 6.72 KB

INTEROPERABILITY-TESTS.md

File metadata and controls

110 lines (93 loc) · 6.72 KB
Raw

Interoperability tests (DRAFT)

How to test Sv2 compliant software against the SRI implementation.

With Message Generator (MG)

First thing you need to write a test that can be executed by the message generator. In order to do that read the message generator doc and look at the test example Or just ask into the discord channel Another option would be to use a test template (TODO) that will mock a particular device.

You can either test against a binary of your application or against a remote endpoint.

When the test has be written you can open a PR to this repo in order to add the test to our tests or fork the project and add the test here and if needed the binaries here. Then you can ran the test with ./message-generator-tests.sh. If you keep the codebase unchanged you should be able to easly merge the updates from upstream main so that test are always against the last SRI version.

TProxy test with MG

As many people may try the SRI with a sv1 mining device (MD), a MG test for the translation proxy has been added: test/message-generator/test/transation-proxy.json You can try this test with your desired sv1 mining device in two ways.

  1. launching it from the test itself, editing the part of execution_commands relative to the launch of the MD.
  2. removing the part of the test that launches the /examples/sv1-mining-device within the SRI. Then launch the test and therefore launch separately your desired sv1 MD.

Using the SRI role implementations

The easiest way to test various configurations is to use the SRI role implementations. For example, here is how you would configure/run a cpuminer -sv1-> Translation Proxy -sv2-> Pool role -> (Template Provider *hosted)

Pool role startup

The Pool role should be configured to point to the hosted Template Provider. In the pool-config.toml file you should see this: tp_address = "75.119.150.111:8442" The default pool-config should have appropriate defaults set up for everything else. To run the pool role simply run: RUST_LOG=debug cargo run -p pool -- -c roles/v2/pool/pool-config.toml NOTE: here we are starting with debug log level - the default is info. If the pool propely starts you should see the following log lines:

2023-01-11T21:21:14.635902Z  INFO pool::lib::template_receiver: Connected to template distribution server at 75.119.150.111:8442
2023-01-11T21:21:14.827071Z  INFO pool::lib::template_receiver::setup_connection: Setup template provider connection success!
2023-01-11T21:21:14.846946Z  INFO pool::lib::mining_pool: Starting up pool listener
2023-01-11T21:21:14.847238Z  INFO pool::lib::mining_pool: Listening for encrypted connection on: 0.0.0.0:34254

Translation Proxy startup

Once the pool role is running you can start up the Translation Proxy. The translation proxy's default configuration at proxy-config.toml points to a locally hosted pool role. To run the translation proxy

  1. move to the roles/translator directory
    1. cd roles/translator
  2. run the translator
    1. RUST_LOG=debug cargo run

If this successfully starts up you'll see these messages as part of the output:

2023-01-11T21:29:05.468529Z  INFO translator: PC: ProxyConfig { upstream_address: "127.0.0.1", upstream_port: 34254, upstream_authority_pubkey: "2di19GHYQnAZJmEpoUeP7C3Eg9TCcksHr23rZCC83dvUiZgiDL", downstream_address: "0.0.0.0", downstream_port: 34255, max_supported_version: 2, min_supported_version: 2, min_extranonce2_size: 16 }
2023-01-11T21:29:05.469467Z  INFO translator::upstream_sv2::upstream: PROXY SERVER - ACCEPTING FROM UPSTREAM: 127.0.0.1:34254
2023-01-11T21:29:05.477542Z  INFO translator::upstream_sv2::upstream: Up: Sending: SetupConnection { protocol: MiningProtocol, min_version: 2, max_version: 2, flags: 14, endpoint_host: Owned([48, 46, 48, 46, 48, 46, 48]), endpoint_port: 50, vendor: Owned([]), hardware_version: Owned([]), firmware: Owned([]), device_id: Owned([]) }
2023-01-11T21:29:05.479122Z DEBUG translator::upstream_sv2::upstream: Up: Handling SetupConnectionSuccess

Miner

Lastly you can start up a sv1 miner of your choice. We have been testing with the cpuminer. Once you have this installed just run: ./minerd -a sha256d -o stratum+tcp://localhost:34255 -q -D -P. This will connect to the translator proxy and speak sv1. If this is successful you should see the following output:

[2023-01-11 09:36:57] 1 miner threads started, using 'sha256d' algorithm.
[2023-01-11 09:36:57] Starting Stratum on stratum+tcp://localhost:34255
*   Trying 127.0.0.1:34255...
* TCP_NODELAY set
* Connected to localhost (127.0.0.1) port 34255 (#0)
* Connection #0 to host localhost left intact
[2023-01-11 09:36:57] > {"id": 1, "method": "mining.subscribe", "params": ["cpuminer/2.5.1"]}

and then eventually it will submit a share:

[2023-01-11 09:37:00] > {"method": "mining.submit", "params": ["", "2940", "0000000000000000000000000000", "63bdfe63", "c48fe801"], "id":4}
[2023-01-11 09:37:00] < {"id":"4","error":null,"result":true}
[2023-01-11 09:37:00] accepted: 1/1 (100.00%), 15333 khash/s (yay!!!)

Testing sv2 miner -insecure-> pool

The other configuration that can be tested is connecting an sv2 ready miner directly to the pool role. The pool role by default assumes a noise handshake but this can be bypassed for testing purposes.

Pool Role startup

Starting the pool role is the same in both tests: RUST_LOG=debug cargo run -p pool -- -c roles/v2/pool/pool-config.toml If you want to test using the insecure (non-encrypted) mode then start the pool with: RUST_LOG=debug cargo run --features test_only_allow_unencrypted -p pool -- -c roles/v2/pool/pool-config.toml NOTE: this uses the test_only_allow_unencrypted feature.

Miner startup

Start up your miner pointing either at the secure port 34254 or insecure port: 34250

Optional: To Locally run the Template Provider (TP)

Do this if you'd like to run your own TP instead of connecting to the hosted TP at 75.119.150.111:8442

  1. Clone and build core
    1. clone [email protected]:Fi3/bitcoin.git
    2. checkout AddCoinbaseOutputAdditionalSize branch
    3. ./autogen.sh && ./configure --enable-template-provider
    4. make
  2. Start and initialize bitcoind
    1. ./src/bitcoind -regtest // this will start bitcoind in regtest mode
    2. create at least 16 blocks with ./src/bitcoin-cli -regtest generatetoaddress 16 bcrt1qttuwhmpa7a0ls5kr3ye6pjc24ng685jvdrksxx