We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
/opt/polardbx_engine/bin/mysqld --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1' --initialize-insecure
/opt/polardbx_engine/bin/mysqld_safe --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1' &
2024-03-24T06:38:52.702808Z 0 [System] [MY-010116] [Server] /opt/polardbx_engine/bin/mysqld (mysqld 8.0.30) starting as process 18898 2024-03-24T06:38:52.702846Z 0 [ERROR] [MY-010338] [Server] Can't find error-message file '/opt/polardbx-engine/share/errmsg.sys'. Check error-message file location and 'lc-messages-dir' configuration directive. 2024-03-24T06:38:53.852884Z 1 [Warning] [MY-011825] [InnoDB] [GTID INFO] Reading from undo log : 2024-03-24T06:38:54.347355Z 0 [Warning] [MY-000000] [Server] Plugin polarx_rpc reported: 'polarx_rpc start up' 2024-03-24T06:38:54.347718Z 0 [ERROR] [MY-000000] [Server] Plugin polarx_rpc reported: 'PolarX RPC disabled.' 2024-03-24T06:38:54.365399Z 0 [System] [MY-010229] [Server] Starting crash recovery... 2024-03-24T06:38:54.371373Z 0 [System] [MY-010232] [Server] Crash recovery finished. 2024-03-24T06:38:54.371621Z 0 [Warning] [MY-000000] [Server] Recover consensus index is 0 2024-03-24T06:38:54.563981Z 0 [Warning] [MY-000000] [Server] gtid_mode is GTID_MODE_ON, turn on recovery_apply_binlog 2024-03-24T06:38:54.566028Z 0 [Warning] [MY-010068] [Server] CA certificate ca.pem is self signed. terminate called after throwing an instance of 'std::out_of_range' what(): basic_string::at: __n (which is 18446744073709551613) >= this->size() (which is 0) 06:38:54 UTC - mysqld got signal 6 ; Most likely, you have hit a bug, but this error can also be caused by malfunctioning hardware. Thread pointer: 0x0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0 thread_stack 0x46000 /opt/polardbx_engine/bin/mysqld(my_print_stacktrace(unsigned char const*, unsigned long)+0x2e) [0x2018e4e] /opt/polardbx_engine/bin/mysqld(handle_fatal_signal+0x2f3) [0x10a4363] /lib64/libpthread.so.0(+0xf630) [0x7f5ffeb8e630] /lib64/libc.so.6(gsignal+0x37) [0x7f5ffd737387] /lib64/libc.so.6(abort+0x148) [0x7f5ffd738a78] /lib64/libstdc++.so.6(__gnu_cxx::__verbose_terminate_handler()+0x165) [0x7f5ffde317d5] /lib64/libstdc++.so.6(+0x5e746) [0x7f5ffde2f746] /lib64/libstdc++.so.6(+0x5e773) [0x7f5ffde2f773] /lib64/libstdc++.so.6(+0x5e993) [0x7f5ffde2f993] /opt/polardbx_engine/bin/mysqld(std::__throw_out_of_range_fmt(char const*, ...)+0x107) [0x2ab6e57] /opt/polardbx_engine/bin/mysqld(alisql::StableConfiguration::initServerFromString(std::shared_ptralisql::Server, std::string, bool)+0x35) [0x29e05b5] /opt/polardbx_engine/bin/mysqld(alisql::StableConfiguration::installConfig(std::vector<std::string, std::allocatorstd::string > const&, unsigned long, alisql::Paxos*, std::shared_ptralisql::LocalServer)+0x3ef) [0x29e237f] /opt/polardbx_engine/bin/mysqld(alisql::Paxos::init(std::vector<std::string, std::allocatorstd::string > const&, unsigned long, alisql::ClientService*, unsigned long, unsigned long, std::shared_ptralisql::LocalServer, bool, unsigned long)+0xb5a) [0x29ba7aa] /opt/polardbx_engine/bin/mysqld(ConsensusLogManager::init_service()+0xf69) [0x1c7ea89] /opt/polardbx_engine/bin/mysqld(init_binlog()+0x44) [0xe21e64] /opt/polardbx_engine/bin/mysqld(mysqld_main(int, char**)+0x1baf) [0xe308df] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5ffd723555] /opt/polardbx_engine/bin/mysqld() [0xe16137] The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 2024-03-24T06:38:54.662940Z mysqld_safe Number of processes running now: 0 2024-03-24T06:38:54.667079Z mysqld_safe mysqld restarted 2024-03-24T06:38:54.923202Z 0 [System] [MY-010116] [Server] /opt/polardbx_engine/bin/mysqld (mysqld 8.0.30) starting as process 18979 2024-03-24T06:38:54.923241Z 0 [ERROR] [MY-010338] [Server] Can't find error-message file '/opt/polardbx-engine/share/errmsg.sys'. Check error-message file location and 'lc-messages-dir' configuration directive.
[mysqld] server-id=2 basedir = /opt/polardbx-engine log_error_verbosity = 2 default_authentication_plugin = mysql_native_password gtid_mode = ON enforce_gtid_consistency = ON log_bin = mysql-binlog binlog_format = row binlog_row_image = FULL master_info_repository = TABLE relay_log_info_repository = TABLE
datadir = /home/polarx/polardbx-engine/data tmpdir = /home/polarx/polardbx-engine/tmp socket = /home/polarx/polardbx-engine/tmp.mysql.sock log_error = /home/polarx/polardbx-engine/log/alert.log port = 4886 cluster_id = 1234 cluster_info = 192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1
[mysqld_safe] pid_file = /home/polarx/polardbx-engine/run/mysql.pid
The text was updated successfully, but these errors were encountered:
改成 (多了一个分号)
/opt/polardbx_engine/bin/mysqld --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886@1' --initialize-insecure
Sorry, something went wrong.
/opt/polardbx_engine/bin/mysqld --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1' --initialize-insecure 改成 (多了一个分号) /opt/polardbx_engine/bin/mysqld --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886@1' --initialize-insecure
rpm可以分享下吗
No branches or pull requests
rpm t-polardbx-engine-2.3.0-b959577.el7.x86_64.rpm
初始化
/opt/polardbx_engine/bin/mysqld --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1' --initialize-insecure
启动
/opt/polardbx_engine/bin/mysqld_safe --defaults-file=/home/my.cnf --cluster-info='192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1' &
报错日志
2024-03-24T06:38:52.702808Z 0 [System] [MY-010116] [Server] /opt/polardbx_engine/bin/mysqld (mysqld 8.0.30) starting as process 18898
2024-03-24T06:38:52.702846Z 0 [ERROR] [MY-010338] [Server] Can't find error-message file '/opt/polardbx-engine/share/errmsg.sys'. Check error-message file location and 'lc-messages-dir' configuration directive.
2024-03-24T06:38:53.852884Z 1 [Warning] [MY-011825] [InnoDB] [GTID INFO] Reading from undo log :
2024-03-24T06:38:54.347355Z 0 [Warning] [MY-000000] [Server] Plugin polarx_rpc reported: 'polarx_rpc start up'
2024-03-24T06:38:54.347718Z 0 [ERROR] [MY-000000] [Server] Plugin polarx_rpc reported: 'PolarX RPC disabled.'
2024-03-24T06:38:54.365399Z 0 [System] [MY-010229] [Server] Starting crash recovery...
2024-03-24T06:38:54.371373Z 0 [System] [MY-010232] [Server] Crash recovery finished.
2024-03-24T06:38:54.371621Z 0 [Warning] [MY-000000] [Server] Recover consensus index is 0
2024-03-24T06:38:54.563981Z 0 [Warning] [MY-000000] [Server] gtid_mode is GTID_MODE_ON, turn on recovery_apply_binlog
2024-03-24T06:38:54.566028Z 0 [Warning] [MY-010068] [Server] CA certificate ca.pem is self signed.
terminate called after throwing an instance of 'std::out_of_range'
what(): basic_string::at: __n (which is 18446744073709551613) >= this->size() (which is 0)
06:38:54 UTC - mysqld got signal 6 ;
Most likely, you have hit a bug, but this error can also be caused by malfunctioning hardware.
Thread pointer: 0x0
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
stack_bottom = 0 thread_stack 0x46000
/opt/polardbx_engine/bin/mysqld(my_print_stacktrace(unsigned char const*, unsigned long)+0x2e) [0x2018e4e]
/opt/polardbx_engine/bin/mysqld(handle_fatal_signal+0x2f3) [0x10a4363]
/lib64/libpthread.so.0(+0xf630) [0x7f5ffeb8e630]
/lib64/libc.so.6(gsignal+0x37) [0x7f5ffd737387]
/lib64/libc.so.6(abort+0x148) [0x7f5ffd738a78]
/lib64/libstdc++.so.6(__gnu_cxx::__verbose_terminate_handler()+0x165) [0x7f5ffde317d5]
/lib64/libstdc++.so.6(+0x5e746) [0x7f5ffde2f746]
/lib64/libstdc++.so.6(+0x5e773) [0x7f5ffde2f773]
/lib64/libstdc++.so.6(+0x5e993) [0x7f5ffde2f993]
/opt/polardbx_engine/bin/mysqld(std::__throw_out_of_range_fmt(char const*, ...)+0x107) [0x2ab6e57]
/opt/polardbx_engine/bin/mysqld(alisql::StableConfiguration::initServerFromString(std::shared_ptralisql::Server, std::string, bool)+0x35) [0x29e05b5]
/opt/polardbx_engine/bin/mysqld(alisql::StableConfiguration::installConfig(std::vector<std::string, std::allocatorstd::string > const&, unsigned long, alisql::Paxos*, std::shared_ptralisql::LocalServer)+0x3ef) [0x29e237f]
/opt/polardbx_engine/bin/mysqld(alisql::Paxos::init(std::vector<std::string, std::allocatorstd::string > const&, unsigned long, alisql::ClientService*, unsigned long, unsigned long, std::shared_ptralisql::LocalServer, bool, unsigned long)+0xb5a) [0x29ba7aa]
/opt/polardbx_engine/bin/mysqld(ConsensusLogManager::init_service()+0xf69) [0x1c7ea89]
/opt/polardbx_engine/bin/mysqld(init_binlog()+0x44) [0xe21e64]
/opt/polardbx_engine/bin/mysqld(mysqld_main(int, char**)+0x1baf) [0xe308df]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5ffd723555]
/opt/polardbx_engine/bin/mysqld() [0xe16137]
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
2024-03-24T06:38:54.662940Z mysqld_safe Number of processes running now: 0
2024-03-24T06:38:54.667079Z mysqld_safe mysqld restarted
2024-03-24T06:38:54.923202Z 0 [System] [MY-010116] [Server] /opt/polardbx_engine/bin/mysqld (mysqld 8.0.30) starting as process 18979
2024-03-24T06:38:54.923241Z 0 [ERROR] [MY-010338] [Server] Can't find error-message file '/opt/polardbx-engine/share/errmsg.sys'. Check error-message file location and 'lc-messages-dir' configuration directive.
my.cnf
[mysqld]
server-id=2
basedir = /opt/polardbx-engine
log_error_verbosity = 2
default_authentication_plugin = mysql_native_password
gtid_mode = ON
enforce_gtid_consistency = ON
log_bin = mysql-binlog
binlog_format = row
binlog_row_image = FULL
master_info_repository = TABLE
relay_log_info_repository = TABLE
datadir = /home/polarx/polardbx-engine/data
tmpdir = /home/polarx/polardbx-engine/tmp
socket = /home/polarx/polardbx-engine/tmp.mysql.sock
log_error = /home/polarx/polardbx-engine/log/alert.log
port = 4886
cluster_id = 1234
cluster_info = 192.168.110.102:14886;192.168.110.103:14886;192.168.110.104:14886;@1
[mysqld_safe]
pid_file = /home/polarx/polardbx-engine/run/mysql.pid
The text was updated successfully, but these errors were encountered: