esp32 wroom 32

[cecheseldine]

unable to program this chip with your duino coin software
have 1 chip programmed with esp32 wroom 32da chip is a eps32 wroom 32d, i cannot program other chips with esp32 wroom 32da setting
is there another version of the board manager that will support these boards

i have 72 of these boards can program them with nerminer no problem

i would like to be able to put more on DUINO Coin as miners
i have 24 chips ready to program, they are esp32 wroom 32 versions no letter after the 32 at the end

[cecheseldine]

nerdminer

[jpx13]

Maybe try esp32 dev module instead of wroom

[rain-revolt]

Have you tried using the DOIT ESP32 DevKit V1? I used that board library and it seems to work great with the ESP32-WROOM-32's.

[cecheseldine]

none of the esp dev board esp32s work, no errors but it does not mine just sits there i got 14 esp32 wroom 32 boards programmed and  mining, the ones i cannot program are 38 pin chips, the 30 pin chips program, cannot get esp32 wroom 32d chips to program, some did some did not just gave me errors and the error was the board was not correct, some programmed no errors just sat there and would not mine, they worked fine after i programmed them as nerd miners, i have left them as nerd miners On Tuesday, February 4, 2025 at 04:27:19 PM EST, rain-revolt ***@***.***> wrote: Have you tried using the DOIT ESP32 DevKit V1? I used that board library and it seems to work great with the ESP32-WROOM-32's. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>