ALTIGA-T1E1-STATS-MIB.my

-- *------------------------------------------------------------------
-- * ALTIGA-T1E1-STATS-MIB.my:  Altiga T1/E1 Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-T1E1-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
         FROM SNMPv2-SMI
      RowStatus
         FROM SNMPv2-TC
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsT1E1, alT1E1Group
         FROM ALTIGA-MIB
      alT1E1MibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaT1E1StatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga T1/E1 Statistics MIB models counters and objects that are
          of management interest.
         
          Acronyms
          The following acronyms are used in this document:

            MIB:        Management Information Base

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alT1E1MibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsT1E1Global OBJECT IDENTIFIER ::= { alStatsT1E1 1 }

alT1E1StatsTable     OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlT1E1StatsEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "The T1/E1 interface statistics MIB."
   ::= { alStatsT1E1 2 }

alT1E1StatsEntry     OBJECT-TYPE
   SYNTAX         AlT1E1StatsEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "An entry the alT1E1StatsTable."
   INDEX    { alT1E1StatsSlot, alT1E1StatsConn }
   ::= { alT1E1StatsTable 1 }

AlT1E1StatsEntry ::= SEQUENCE {
   alT1E1StatsRowStatus    RowStatus,
   alT1E1StatsSlot         Integer32,
   alT1E1StatsConn         Integer32,
   alT1E1StatsLineStatus   INTEGER,
   alT1E1StatsElapsedSecs  Counter32,
   alT1E1StatsBPVs         Counter32,
   alT1E1StatsESs          Counter32,
   alT1E1StatsSESs         Counter32,
   alT1E1StatsBESs         Counter32,
   alT1E1StatsSEFSs        Counter32,
   alT1E1StatsUASs         Counter32,
   alT1E1StatsLCVs         Counter32,
   alT1E1StatsCSSs         Counter32,
   alT1E1StatsDMs          Counter32,
   alT1E1StatsPCVs         Counter32,
   alT1E1StatsLESs         Counter32
}

alT1E1StatsRowStatus    OBJECT-TYPE
   SYNTAX         RowStatus
   MAX-ACCESS     read-create
   STATUS         current
   DESCRIPTION
          "The status of this row."
   ::= { alT1E1StatsEntry 1 }

alT1E1StatsSlot         OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The physical slot for this T1/E1 port. Part of the index."
   ::= { alT1E1StatsEntry 2 }
   
alT1E1StatsConn         OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The physical connector for this T1/E1 port. Part of the index."
   ::= { alT1E1StatsEntry 3 }
   
alT1E1StatsLineStatus   OBJECT-TYPE
   SYNTAX INTEGER {
      init (1),
      up (2),
      red (3),
      blue (4),
      yellow (5),
      loopback (6)
   }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current status of the line."
   ::= { alT1E1StatsEntry 4 }
   
alT1E1StatsElapsedSecs  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of seconds this T1/E1 port has been running."
   ::= { alT1E1StatsEntry 5 }
   
alT1E1StatsBPVs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of bipolar violations detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 6 }
   
alT1E1StatsESs    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of errored seconds detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 7 }
   
alT1E1StatsSESs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of severly errored secondss detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 8 }
   
alT1E1StatsBESs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of bursty errored seconds detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 9 }
   
alT1E1StatsSEFSs  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of severly errored framing seconds detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 10 }
   
alT1E1StatsUASs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of unavailable seconds detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 11 }
   
alT1E1StatsLCVs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of line coding violations detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 12 }
   
alT1E1StatsCSSs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of controlled slips detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 13 }
   
alT1E1StatsDMs    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of degraded minutes detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 14 }
   
alT1E1StatsPCVs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of path coding violations detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 15 }
   
alT1E1StatsLESs      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of line errored seconds detected on this T1/E1 port."
   ::= { alT1E1StatsEntry 16 }
   
altigaT1E1StatsMibConformance OBJECT IDENTIFIER ::= { altigaT1E1StatsMibModule 1 }
altigaT1E1StatsMibCompliances OBJECT IDENTIFIER ::= { altigaT1E1StatsMibConformance 1 }

altigaT1E1StatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga T1/E1 Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaT1E1StatsGroup
   }
   ::= { altigaT1E1StatsMibCompliances 1 }

altigaT1E1StatsGroup OBJECT-GROUP
   OBJECTS
   {
      alT1E1StatsRowStatus,
      alT1E1StatsSlot,
      alT1E1StatsConn,
      alT1E1StatsLineStatus,   
      alT1E1StatsElapsedSecs,  
      alT1E1StatsBPVs,         
      alT1E1StatsESs,          
      alT1E1StatsSESs,         
      alT1E1StatsBESs,         
      alT1E1StatsSEFSs,        
      alT1E1StatsUASs,         
      alT1E1StatsLCVs,         
      alT1E1StatsCSSs,         
      alT1E1StatsDMs,          
      alT1E1StatsPCVs,         
      alT1E1StatsLESs         
   }
   STATUS   current
   DESCRIPTION
          "The objects for T1/E1 configuration."
   ::= { alT1E1Group 2 }

END