Replies: 2 comments
-
PS all N64 dumps save Z64 files which attempt but do not load in emulator. Megadrive dumps save a .BIN file which are not recognised by an emulator |
Beta Was this translation helpful? Give feedback.
-
Hi. Have you successfully dumped any other systems with your OSCR ? Just to isolate issues like SD card corruption etc. For the N64, if you see the game title displayed well on screen, then it's a good start. Try to compare your z64 roms with current existing roms, like with an hex editor, to see how different they are. For the MD, your cart seems not recognized well at all. The header is already messy ("Name: 088888880808888"). Have you tried to clean the cart pins really hard ? That is the most common issue with old systems. |
Beta Was this translation helpful? Give feedback.
-
OSCR firmware version
9.5 to 12.4 - see below
OSCR hardware version
HW5 Rev3
Attach OSCR_LOG.txt file here
(N64 example)
OSCR HW5 V12.4
[+] Nintendo 64 (3V)
[+] Game Cartridge
Searching database...
GAMEPAK ERROR
Title: THE LEGEND_OF ZELDA
Serial: NZLP
CRC1: 90449569
Cartridge unknown
Press Button...
[+] 64 MB
[+] Read ROM
Saving to N64/ROM/GPERROR/20/...
[*******************]
CRC32... D1139BBC -> Not found
(Megadrive example)
OSCR HW5 V9.5
[+] Mega Drive
[+] Game Cartridge
Cart Info
Name: 088888880808888
bramCheck: 0030
Size: 24 MBit
ChkS: 0038
Sram: None
[+] Read Rom
Saving to MD/ROM/088888880808888/42/...
[*******************]
Internal checksum...Error
35FC
CRC32... 2B0BDF38 -> Not found
System used
N64 Cartridge
Describe the issue.
None of my many N64 or Megadrive cartridges will dump ROMs. (I don't have other types so slots not enabled or installed)
Every cart I try on gives result "CRC32 not found"
Most N64 cartridges report Gamepak error but the cart name is displayed.
Only Goldeneye does not report Gamepak error, it saves a Z64 file but still reports CRC32 not found and Mupen64 will not load it.
Have ran self test as web advice says
I have cleaned cart terminals as web advice says
I have checked solder joints as web advice says
I have flashed OCRs 9.5 to 12.4. Earlier versions drivers don't install, later versions report compiling error "checkAltConf exit status 1 'checkButton' was not declared in this scope" I don't know how to fix that
I have tried disabling clock generator
Now considering new parts and build but don't want to waste money, so I'm wondering if this is a common / known / solved problem?
Beta Was this translation helpful? Give feedback.
All reactions