Skip to content
This repository has been archived by the owner on Dec 29, 2021. It is now read-only.

Latest commit

 

History

History
54 lines (40 loc) · 2.26 KB

README.md

File metadata and controls

54 lines (40 loc) · 2.26 KB

GNU Radio amateur radio examples

Red Pitaya

RedPitaya contains code for Red Pitaya PiRadar.

SSB Examples

First we start with the most basic example of SSB. This example lacks the filtering normally used with these methods to be as minimal as possible. They work via files recorded to disk using your computer's microphone.

There are numerous references for SSB transmitters and receivers, such as the ARRL Handbook, or the Philips AN1981 application note. In AN1981, Fig. 8 shows the Weaver method receiver (note I only use the part to the right of the filters, since I didn't use filtering). In AN1981, Fig. 5 shows the Phasing method transmitter. In both cases, ignore the divide-by-4 of AN1981 as that's peculiar to their system.

Simplest synthetic SSB simulation

This simulation doesn't use any filters, and so would never work in the real world unless there were no other transmissions within a few octaves of your sampling bandwidth. You can see in the FFT scope on transmit that it is indeed USB transmission.

The first example uses the phasing method to transmit on a synthetic 50 kHz carrier frequency Fc, upper sideband only. Next, you receive this Fc=50 kHz USB transmission using a Weaver method SSB receiver.

The noise floor on transmit extends from Fc to Fc+24 kHz as that's 1/2 the bandwidth of your 48kHz sound card. You can transmit some hi-fidelity SSB audio of DC to 24kHz, limited by your PC microphone and speakers. You may hear some background crackling and aliasing artifacts due to no digital filtering used, but overall the audio should be relatively clear.

You can see the reference material to add the appropriate filters to these examples as an exercise.

  1. Open and Run ssbTXhilbert.grc in GNU Radio Companion. This records your voice via your computer microphone to a file $HOME/test.dat. This file is complex float data. Hit Stop to stop recording.
  2. Open and Run ssbRX.grc in GNU Radio Companion. This loops back your voice through your computer speakers.

simplest no-filter SSB receiver

simplest no-filter SSB transmitter