Replies: 44 comments 52 replies
-
Ryzen 9 5900HS (Zephyrus G15 2021) After hitting Apply, got this:
And with NVIDIA chip active, this:
|
Beta Was this translation helpful? Give feedback.
-
Ryzen 9 5980HX (ROG Strix G15 Advantage Edition 2021) This was the output from the log:
|
Beta Was this translation helpful? Give feedback.
-
Ryzen 9 5900HS (Zephyrus G14 2021) log: |
Beta Was this translation helpful? Give feedback.
-
Ryzen 5800H ( Zephyrus G15 2021 ) log: Also tried using RyzenAdj with similar results ( ... rejected by SMU ) |
Beta Was this translation helpful? Give feedback.
-
Ryzen 4600HS (G14 2020 GA401IH) log: |
Beta Was this translation helpful? Give feedback.
-
Ryzen 9 4900HS (G14 2020 GA401IV) 7/7/2023 10:41:04 PM: UV: -10 OK |
Beta Was this translation helpful? Give feedback.
-
Zephyrus G15 GA503RW 2022 7/8/2023 8:34:56 AM: UV: -5 FAILED :( |
Beta Was this translation helpful? Give feedback.
-
Zephyrus G14 2021 GA401QM 08/07/2023 15:32:51: UV: -5 FAILED |
Beta Was this translation helpful? Give feedback.
-
Rog Strix G1713PV - Ryzen 9 7845hx / RTX4060 |
Beta Was this translation helpful? Give feedback.
-
G15 2022 Ryzen 7 6800HS: |
Beta Was this translation helpful? Give feedback.
-
ROG Strix G733PY_G733PY |
Beta Was this translation helpful? Give feedback.
-
ROG Zephyrus G14 GA401IV Ryzen 7 4800HS, working for CPU:
|
Beta Was this translation helpful? Give feedback.
-
Zephyrus G15 2022 GA503RM
|
Beta Was this translation helpful? Give feedback.
-
Zephyrus G14 2020 GA401II
|
Beta Was this translation helpful? Give feedback.
-
Zephyrus G14 2023 GA402XY
Edit: |
Beta Was this translation helpful? Give feedback.
-
Ryzen 7 4800H (ROG strix G513IH) After hitting apply :
|
Beta Was this translation helpful? Give feedback.
-
CO should work on the Z1, at least you can set CO on UXTU Handheld (but you also get a handle leak) and get drastically reduced temperatures. |
Beta Was this translation helpful? Give feedback.
-
Hi, I got no undervolting setting for TUF A15 R9 7940HS |
Beta Was this translation helpful? Give feedback.
-
All of us tryed unsuccesfully to undervolt, or underclocking cpu , specially for laptop for solve freeze , or blue death screen . Unsuccesfully ? right ? all of us tryed to clean cpu and gpu fun and apply newer thermal paste, with only 5°C less and nothing solved. Probably we did it not so well, but, i'm sure 9 / 10 of us not succesfully. |
Beta Was this translation helpful? Give feedback.
-
Does anyone know if undervolting the Ryzen 7 6800 will ever be possible with G Helper ? |
Beta Was this translation helpful? Give feedback.
-
7945HX3D - undervolt works ( strange thing that when i apply -30 in bios all stable, but when in ghelper -20 instant crash) 11/12/2023 5:40:52 PM: App launched: ROG Strix G733PYV_G733PYV :0.129.0.0en-US. |
Beta Was this translation helpful? Give feedback.
-
i think there seem to be typo here Asus rog advantage edition have AMD Ryzen™ 9 5900HX not Ryzen 9 5980HX, also in case the undervolt cause instability or system crashes how will i be able to reset the voltage value will holding power button for 30 sec work ? source: https://rog.asus.com/laptops/rog-strix/2021-rog-strix-g15-advantage-edition-series/spec/ |
Beta Was this translation helpful? Give feedback.
-
@seerge LOG - |
Beta Was this translation helpful? Give feedback.
-
Rog stric G513IM
|
Beta Was this translation helpful? Give feedback.
-
TUF Gaming A15 9/27/2024 4:50:58 PM: UV: -29 OK |
Beta Was this translation helpful? Give feedback.
-
i don't think the ryzen 9 5900hx in the tuf a15 fa506qm support it cause it shows the power limit options but doesn't work i think? i have attached the log file as well. |
Beta Was this translation helpful? Give feedback.
-
Hi. I have encountered the following problem. On Asus TUF F15 Gaming FX507ZV4 laptop model there is no Advanced tab to control CPU temperature. Is it possible to control CPU temperature in any other way? |
Beta Was this translation helpful? Give feedback.
-
Hey @seerge. Do you have any more thoughts on adding the ability to set a per-core curve optimiser offset? I'm running a 7945HX and the per-core values differ quite significantly (currently testing at -31,-37,-32,-29,-31,-34,-24,-33,-38,-49,-39,-40,-37,-38,-34,-44). A global offset is not optimal for my laptop. If not, is there any way to stop GHelper just from setting the Curve Optimiser offset, without also removing the ability to set the CPU temperature limit - as this is very useful. Per-core curve optimiser can easily be set using ryzen-smu-cli And then set the desired offset with (using my values as an example): Thank you! |
Beta Was this translation helpful? Give feedback.
-
Hello @seerge |
Beta Was this translation helpful? Give feedback.
-
Sorry to bother you after 2 years, but I wanted to know if there's any way to undervolt the ryzen 5 7535hs processor, because we know that AMD has been blocking access to mobile processors with lower voltages for several years, and the manufacturers have removed these options from the BIOS. I can't find a way to lower the temperatures without losing the incredible performance. What do you think about this? @seerge |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello fellow community,
Since last few versions app has option to undervolt AMD CPUs. Currently UI will show CPU / iGPU undervolt sliders (under Fans + Power -> Advanced) for all AMD models. But from my knowledge only Ryzen 9 seem to support it, while Ryzen 5 or 7 don't seem to support it at all, and I want to hide this from UI for them.
UPDATE
In new versions I have removed Undervolting sliders for CPUs that don't support it. If you still want to "test" and make sure if it works or not for you you can get https://github.com/seerge/g-helper/releases/tag/v0.95 where slider is visible for all devices.
Thanks
Beta Was this translation helpful? Give feedback.
All reactions